Categories

Best Digital Tv Encoder

10PCS 5 Pin Rotary Encoder+Washers+Nuts DC 5V EC11 Rotary Encoder Coding Switch Digital Potentiometer with Switch

  • [Specification]- Type: EC11 Encoder without Screw Thread.
  • [Rotary encoder]- By rotating the rotary encoder can be counted in the positive direction and the reverse direction during rotation of the output pulse frequency, unlike rotary potentiometer count, this rotation counts are not limited. With the buttons on the rotary encoder can be reset to its initial state, that starts counting from 0..
  • [Applications]- Rotary encoders are widely used in industrial controls, robotics, photographic lenses, computer input devices such as optomechanical mice and trackballs, controlled stress rheometers..
  • [Package Content]- 5pcs x Rotary Encoder Code Switch Digital Potentiometer.
Check Stock

CUI Inc AMT102-V AMT10X Series 3.6 to 5.5 V 2-8 mm Open Center Capacitive Encoder Switch Kit - 1 item(s)

  • [Specification]- Type: EC11 Encoder with Screw Thread.
  • [Rotary encoder]- By rotating the rotary encoder can be counted in the positive direction and the reverse direction during rotation of the output pulse frequency, unlike rotary potentiometer count, this rotation counts are not limited. With the buttons on the rotary encoder can be reset to its initial state, that starts counting from 0..
  • [Applications]- Rotary encoders are widely used in industrial controls, robotics, photographic lenses, computer input devices such as optomechanical mice and trackballs, controlled stress rheometers..
  • [Package Content]- 10pcs x Rotary Encoder Code Switch Digital Potentiometer.
Check Stock

WSDMAVIS 1 Pcs Rotary Encoder E6B2 CWZ6C E6B2-CWZ6C 1024P/R DC 5-24V for OMRON

  • Type: 2pcs 360 Degrees Rotary Encoder Module, Model: KY-040, Working Voltage: 5V, Pulse Count Per Circle: 20.
  • Purpose: The rotary encoder can count the quantity of output pulse in the positive and negative direction rotation. The rotation counting is unlimited..
  • An incremental encoder is a rotating sensor that converts rotation displacement into a series of digital pulse signals. These pulses are used to control angular displacement..
  • The reading system usually uses differential mode to compare two different waveforms, but the phase difference is 180 degrees, so as to improve the quality and stability of the output signal..
  • With the button on rotary encoder, it can be reset to the initial state, that starts counting from 0..
Check Stock

ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe Assembled Finished Machine EM001

  • ASSEMBLED FINISHED: ETEPOPN EM001 digital DIY oscilloscope kit with case is an assembled finished machine No soldering/assembly work needs It can be....
  • UPGRADED VERSION: The sensitivity of the EM001 has been extended both in width and height which is wider and higher than the others It reaches 5mV/div....
  • HAND-HELD: This updated digital oscilloscope can be hand-held while the others can only be used by placing it on the desktop.
  • ROTARY ENCODER: It has been added the rotary encoder makes parameter adjustment more quicker and easier.
  • WHAT YOU GET: You will get a assembled oscilloscope and BNC-clip cable Detailed Operation instructions troubleshooting guide and schematic are also....
Check Stock

ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe Power Adapter Assembled Finished Machine Q15001 White

  • ASSEMBLED FINISHED - ETEPOPN Q15001 digital DIY oscilloscope kit with case is an assembled finished machine. No soldering/assembly work needs. It can....
  • UPGRADED VERSION - The sensitivity of the Q15001 has been extended both in width and height, which is wider and higher than the others. It reaches....
  • HAND-HELD - This updated digital oscilloscope can be hand-held, while the others can only be used by placing it on the desktop..
  • ROTARY ENCODER - It has been added the rotary encoder, makes parameter adjustment more quicker and easier..
  • WHAT YOU GET - You will get a assembled oscilloscope, BNC-clip cable and a power adapter. Detailed Operation instructions, troubleshooting guide and....
Check Stock

ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe (Assembled Finished Machine) EM001

  • ASSEMBLED FINISHED – ETEPOPN EM001 digital DIY oscilloscope kit with case is an assembled finished machine. No soldering/assembly work needs. It can be used directly to avoid assembling/welding process problems and greatly save your time..
  • UPGRADED VERSION – The sensitivity of the EM001 has been extended both in width and height, which is wider and higher than the others. It reaches 5mV/div – 20V/div, while the others is only 10mV/div – 5v/div..
  • HAND-HELD – This updated digital oscilloscope can be hand-held, while the others can only be used by placing it on the desktop..
  • ROTARY ENCODER – It has been added the rotary encoder, makes parameter adjustment more quicker and easier..
  • WHAT YOU GET – You will get a assembled oscilloscope, BNC-clip cable and a power adapter. Detailed Operation instructions, troubleshooting guide and schematic are also provided..
Check Stock

Lexus 44050-48191, ABS Modulator

  • Distribute one channel of digital SD or HD up to 1080i/p throughout your entire facility over coax cable infrastructure.
  • Frequency agile, MPEG-2, QAM encoder/modulator.
  • Supports Dolby Digital AC-3, 5.1 audio and Send HD Video directly to your display using your built in Digital (QAM) Tuner.
  • Closed Captioning and Emergency Alert System support.
Check Stock

TOYOTA 44500-47141 ABS Modulator

  • Distribute one channel of digital SD or HD up to 1080i/p throughout your entire facility over coax cable infrastructure.
  • Frequency agile, MPEG-2, QAM encoder/modulator.
  • Supports Dolby Digital AC-3, 5.1 audio and Send HD Video directly to your display using your built in Digital (QAM) Tuner.
  • Closed Captioning and Emergency Alert System support.
Check Stock

ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe with Power Supply, (Assembled Finished Machine) EM001

  • 【SIMPLE DESIGN】ETEPOPN EM001 oscilloscope kit is an assembled finished machine that can be used directly to avoid assembly/soldering process problems and saving you a lot of time. The display and MCU are mounted on the same board (motherboard) to avoid the use of inter-board pinouts. The analog channels are placed on a separate board containing most user-installed parts, thus allowing better separation of analog and digital circuits..
  • 【UPGRADED VERSION】The sensitivity of the EM001 oscilloscopes has been extended both in width and height which is wider and higher than the others It reaches 5mV / div – 20V / div while the others is only 10mV / div – 5v / div..
  • 【HAND-HELD】This updated digital oscilloscope can be hand-held while the others can only be used by placing it on the desktop..
  • 【ROTARY ENCODER】It has been added the rotary encoder makes parameter adjustment more quicker and easier..
  • 【WHAT YOU GET】You will get an assembled mini oscilloscope, BNC clip cable, and a power supply. Detailed operating instructions (troubleshooting guide) and schematics are also provided. If you have any questions about this digital oscilloscope, you can always contact us and we will reply within 24 hours..
Check Stock

RF and mm-Wave Power Generation in Silicon

  • Distribute one channel of digital SD or HD up to 1080i/p throughout your entire facility over coax cable infrastructure.
  • Frequency agile, MPEG-2, QAM encoder/modulator.
  • Supports Dolby Digital AC-3, 5.1 audio and Send HD Video directly to your display using your built in Digital (QAM) Tuner.
  • Closed Captioning and Emergency Alert System support.
Check Stock

Channel Master CM-1050 ATSC HD Modulator (HDMI to Coax)

  • Distribute one channel of digital SD or HD up to 1080i/p throughout your entire facility over coax cable infrastructure.
  • Frequency agile, MPEG-2, QAM encoder/modulator.
  • Supports Dolby Digital AC-3, 5.1 audio and Send HD Video directly to your display using your built in Digital (QAM) Tuner.
  • Closed Captioning and Emergency Alert System support.
Check Stock

2 Axis DRO Digital Readout RPM Display Magnetic Scale Encoder Set 5um Bridgeport Lathe DRO DIY Set .Travel Length Customized USA Stock

  • ...le.eg 300mm or 900mm.600mm &900mm 2. 1pcs long scale and a short scale .eg : 1500mm & 320mm .1600mm and 300mm B , 2pcs Magnetic Scale Sensor (reading head) 5um resolution , C. Magnetic Tape & Stainless Steel Strip -2M D,End cap - 2 Pair. E.All of accessory for mounting scale ( User Manual included ) . F Digital Readout 2 Axis DRO Digital Readout RPM .Hall Sensor included.
  • Magnetic Linear Scale Advantage : Fully sealed redhead with perfect structure of the profile takes it match IP67 protection class ,life time is longer than linear glass ,Easy to cut and just its length . based on we provide 5 years warranty.
  • High Performance- 2 Axis Lathe DRO Digital Readout can be widely used on the Milling Machine bridgeport milling machine,Lathe Machine /7inch LCD Screen DRO ,Easy for operation. Built-in User manual , freeing hands from paper manuals.
Check Stock

Digital Modulator with Built-in Ir Engine and Led Channel Display

  • Distribute two channels of digital SD or HD up to 1080i/p throughout your entire facility over coax cable infrastructure.
  • Frequency agile, MPEG-2, QAM encoder/modulator.
  • Closed Captioning and Emergency Alert System support.
Check Stock