Categories

Best Dimensional Accuracy

PB Swiss Tools Ball Point Hex Key Set, chrome-plated, with sizes 1.5-5mm

  • Every PB hex key is held to tolerances less than a human hair for perfect dimensional accuracy..
  • Only Ball Point Hex Key manufactured with 30+ degrees of movement and perfect dimensional accuracy..
  • PB's spring steel, despite a hardness of 58-60HRC, allows toughness/elasticity in its hex keys..
  • Every PB Swiss Tools product comes with an unlimited lifetime guarantee..
Check Stock

PB Swiss Tools 1/8\ Ball Point Hex Key L-wrench, long-type, chrome-plated

  • Every PB hex key is held to tolerances less than a human hair for perfect dimensional accuracy..
  • Only Ball Point Hex Key manufactured with 30+ degrees of movement and perfect dimensional accuracy..
  • PB's spring steel, despite a hardness of 58-60HRC, allows toughness/elasticity in its hex keys..
  • Every PB Swiss Tools product comes with an unlimited lifetime guarantee..
Check Stock

PB Swiss Tools 5/16\ Ball Point Hex Key L-wrench, long-type, chrome-plated

  • Every PB hex key is held to tolerances less than a human hair for perfect dimensional accuracy..
  • Only Ball Point Hex Key manufactured with 30+ degrees of movement and perfect dimensional accuracy..
  • PB's spring steel, despite a hardness of 58-60HRC, allows toughness/elasticity in its hex keys..
  • Every PB Swiss Tools product comes with an unlimited lifetime guarantee..
Check Stock

SUNLU Silk Rainbow PLA Filament 1.75mm, Gradient 3D Printer Filament Multicolor 1KG/Spool, 0.02 mm, Rainbow Silk

  • 【Silk Rainbow & Multicolor PLA】This type rainbow filaments normally around 15 meters change color, the colors reapeat red,orange,yellow,green, blue,purple,pink on the roll. The Silk colors are randomly delivered , both are very gorgeous, The first color is random, coloring of prints can be influenced by varying size of printed objects, infill, and total number.
  • 【Dimensional Accuracy & Consistency】These Silk Rainbow PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration.
  • 【Clog-Free, Bubble-Free & Easy-to-use】 Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended Rainbow PLA Filament Extrusion/Nozzle Temperature 220-230℃, bed 70℃.
  • 【Wide Compatibility】Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm..
Check Stock

SUNLU Clear PLA Filament 1.75mm, 3D Printer Filament Transparent PLA Dimensional Accuracy /- 0.02 mm, 1KG

  • 【Toughness Enhanced PLA Filaments】---SUNLU premium PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness..
  • 【Dimensional Accuracy & Consistency】---These tough PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration.
  • 【Clog-Free, Bubble-Free & Easy-to-use】--- Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended PLA Filament Extrusion/Nozzle Temperature 215-230℃, bed 70℃ ..
  • 【Wide Compatibility】 --- Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm..
  • 【Risk-Free】 --- One-month free trial, 30 day Money-back if you’re not satisfied. Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 2.20".
Check Stock

Kingroon PLA 3D Printer Filament, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool(2.2lbs), 1.75 mm,White

  • Toughness Enhanced PLA Filaments: Kingroon premium PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness..
  • Clog-Free, Bubble-Free & Easy-to-use: Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended PLA Filament Extrusion/Nozzle Temperature 215-220℃, bed 70℃..
  • Dimensional Accuracy & Consistency: These tough PLA filaments have very strict tolerances. Diameter is 1.75mm with a dimensional accuracy of + / - 0.02mm 1 kg spool (2.2lbs)..
  • Wide Compatibility: Works perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy..
  • Excellent service: Kingroon is a customer-centric company, we have been committed to providing customers with good service, if you have any questions, please do not hesitate to contact us at any time, we will try our best to solve your problems..
Check Stock

SUNLU PLA 3D Printer Filament, PLA Filament 1.75 mm Dimensional Accuracy +/- 0.02 mm, 1 KG Spool, PLA White

  • 【Toughness Enhanced PLA Filaments】---SUNLU premium PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness..
  • 【Dimensional Accuracy & Consistency】These tough PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration.
  • 【Clog-Free, Bubble-Free & Easy-to-use】--- Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended PLA Filament Extrusion/Nozzle Temperature 210-220℃, bed 60℃ ..
  • 【Wide Compatibility】 --- Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm..
  • 【Risk-Free】 --- One-month free trial, 30 day Money-back if you’re not satisfied. Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 2.20".
Check Stock

SUNLU PLA 3D Printer Filament, PLA Filament 1.75mm Dimensional Accuracy +/- 0.02 mm, 1 KG Spool, PLA Gray

  • 【Toughness Enhanced PLA Filaments】---SUNLU premium PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness..
  • 【Dimensional Accuracy & Consistency】These tough PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration.
  • 【Clog-Free, Bubble-Free & Easy-to-use】--- Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended PLA Filament Extrusion/Nozzle Temperature 215-230℃, bed 70℃ ..
  • 【Wide Compatibility】 --- Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm..
  • 【Risk-Free】 --- One-month free trial, 30 day Money-back if you’re not satisfied. Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 2.20".
Check Stock

DEWALT 12-Inch Compound Miter Saw Double-Bevel, 15-Amp (DW716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2x8-Inch dimensional lumber at 90 and a 2x6-Inch dimensional lumber at 45.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 - 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity.
  • Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

SUNLU PLA 3D Printer Filament, PLA Filament 1.75 mm Dimensional Accuracy +/- 0.02 mm, 1 KG Spool, PLA White+Grey

  • 【Toughness Enhanced PLA Filaments】---SUNLU premium PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness..
  • 【Dimensional Accuracy & Consistency】These tough PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration.
  • 【Clog-Free, Bubble-Free & Easy-to-use】--- Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended PLA Filament Extrusion/Nozzle Temperature 215-220℃, bed 70℃ ..
  • 【Wide Compatibility】 --- Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm..
  • 【Risk-Free】 --- One-month free trial, 30 day Money-back if you’re not satisfied. Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 2.20".
Check Stock

DEWALT Miter Saw, Double-Bevel, Compound, 12-Inch, 15-Amp (DWS716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2×8-Inch dimensional lumber at 90° and a 2×6-Inch dimensional lumber at 45°.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 – 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity. Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

Marble PLA Filament 1.75mm 3D Printing Filament 1KG 2.2LBS 3D Printer Material Sparkly Stone Rock PLA CC3D

  • 【Toughness Enhanced PLA Filaments】---SUNLU premium PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness..
  • 【Dimensional Accuracy & Consistency】These tough PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration.
  • 【Clog-Free, Bubble-Free & Easy-to-use】--- Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended PLA Filament Extrusion/Nozzle Temperature 215-220℃, bed 70℃ ..
  • 【Wide Compatibility】 --- Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm..
  • 【Risk-Free】 --- One-month free trial, 30 day Money-back if you’re not satisfied. Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 2.20".
Check Stock

PLA 3D Printer Filament, SUNLU PLA Filament 1.75mm, Dimensional Accuracy +/- 0.02 mm, 1kg Spool, 1.75mm, PLA Black+White

  • 【Toughness Enhanced PLA Filaments】---SUNLU premium PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness..
  • 【Dimensional Accuracy & Consistency】These tough PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration.
  • 【Clog-Free, Bubble-Free & Easy-to-use】--- Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended PLA Filament Extrusion/Nozzle Temperature 215-220℃, bed 70℃ ..
  • 【Wide Compatibility】 --- Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm..
  • 【Risk-Free】 --- One-month free trial, 30 day Money-back if you’re not satisfied. Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 2.20".
Check Stock