Best Din Rail Screw Terminal Block

Hubbell TD1000 Digital Display Module

  • Support AC and DC control signal, Relay action LED indicator, relay coil protection by means of a freewheeling diode..
  • Panasonic PA1a SPST-NO 5Amp power relay. Original Panasonic PA1a-PS pluggable socket for support replacement relay, and with removal key..
  • Dinkle high quality fireproof nylon material DIN rail mount housing, can support width 35mm, 32mm and 15mm rail..
  • High quality screw terminal blocks and clear marking label for terminal block position. Pitch 5.08mm/0.2" and 7.62mm/0.3" screw terminal block. Wire range 26 to 12AWG / 2.5mm square. Screws - M2.5, steel, Cr3+ Zn plated. Pin header and Cage - Brass..
  • High quality glass fiber FR-4 PCB, top and bottom dual copper layers..
Check Stock

Electronics-Salon DIN Rail Mount 8 DPDT Signal Relay Interface Module. (Operating Voltage: DC 24V)

  • DIN Rail Mount 8 Channel DPDT Signal Relay Interface Module, DC 24V Version..
  • RYxxW-K high quality signal relays, LED indicator for each relay channel. Darlington transistors circuit driving relay, improve the reliability of action..
  • DIN rail mount carrier: High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail. FR-4 fiber glass dual layers PCB..
  • Pitch 3.81mm / 0.15" screw terminal block, wire range 26-16AWG, strip length 5mm / 0.2", Metric M2 slotted screw..
  • Datasheet: https://images-na.ssl-images-amazon.com/images/I/A1vg1+5HA8L.pdf.
Check Stock

CZH-LABS DIN Rail Mount DSUB DB50 Male/Female Header Interface Module D-SUB Breakout Board.

  • Standard DB50 Male/Female header connectors. Male header, female header and screw terminal 1:1:1 connects for per line..
  • Rated voltage: 60V. Rated current: 1A / per pin. Operating Temperature: -20ºC to 50ºC.
  • Terminal block: Pitch 3.81mm/0.15" miniaturization screw terminal block. Wire range - 26-16AWG. Strip length - 5mm. Screws - M2,steel,Cr3+ Zn plated.....
  • FR-4 fiber glass PCB, dual copper layers..
  • High quality fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the....
Check Stock

Electronics-Salon DIN Rail Mount 20 Position 30A / 300V Screw Terminal Block Distribution Module.

  • DIN Rail Mount 20 Position 30A / 300V Screw Terminal Block Distribution Module..
Check Stock

Electronics-Salon DIN Rail Mount Screw Terminal Block Adapter Module, for Arduino UNO R3.

  • DIN Rail Mount Screw Terminal Block Breakout Board for Arduino MKR. With the breakout board, you can easily extend Arduino MKR projects to industrial control applications..
  • PCB mount Terminal Block: pitch 5.0mm/0.197.
Check Stock

NORJIN UK-2.5N DIN Rail Terminal Blocks Set, Including 20Pcs UK-2.5N 12 AWG Terminal Blocks + 4Pcs End Covers + 4Pcs End Brackets + 2Pcs Ground Blocks  + 2Pcs Fixed Bridge Jumpers & Aluminum Rail

  • 【UK-2.5N DIN Rail Terminal Blocks Kit】Comes with 20pcs UK-2.5N 12 AWG terminal blocks, 2pcs ground blocks, 2pcs jumpers, 4pcs E/UK end brackets, 4pcs UK-2.5BG end covers and 1pcs 8" aluminum rail .
  • 【Terminal Blocks UK2.5B】Terminal Blocks UK2.5B is made of  nylon PA66 housing, alloy copper bodies and nickel-plated Screws. Rated voltage: 600V, IEC 690V. Rated current: 20A, IEC 32A.Flexible (AWG): 24-12. It can connect two conductors with ease and can be used on DIN Rail 35mm, steel or aluminum. .
  • 【8in Aluminum DIN Rail】Length : 203mm/ 8".
  •   Height : 7.5mm/ 0.3".   Thickness : 1.2mm/ 0.047".   Guide rails can be used to install circuit breakers, contactors, surge protectors, modular jacks, motor soft starters, PLC, relays, terminals and other electrical appliances. .
  • 【Ground Terminal Blocks Connectors】The grounding terminal blocks provide an easy-to-identify, convenient, neatly organized grounding bus that is mounted on the DIN rail. The protective terminal blocks has strong clamps to ensure tight fixation on DIN rails to achieve the PE function. .
  • 【Bridge, End Stopper Bracket, End Cover】The bridge can be insert at the top clamp space of UK terminal blocks, potential distribution can be contact quickl....
Check Stock

Blue Sea Systems 5035 / Blue Sea 5035 ST Blade Fuse Block w/Cover - 6 Circuit Independent w/o Negative Bus

  • DIN Rail Mount 20 Position Screw Terminal Block Distribution Module with 10 Channel Fuses..
  • Terminal postion 01 to 01, 02 to 02 ......, 10 to 10 direct connected, rated current 30Amp for per channel..
  • Terminal postion F1 to F1', F2 to F2' ......, F10 to F10' connect via fuses, rated current 10Amp for per channel. Replaceable fuses with easy to operate fuse holders, fuse holders for D5mm x L20mm tube fuse, factory-installed fuses Slow Blow 10Amp..
Check Stock

UK5-HESI DIN Rail Fuse Holder Disconnect Terminal Blocks Screw Clamp UK5RD (Without LED indicated, Grey, 10)

  • ✯ Category: Fuse Holder Terminal Block.
  • Type: UK5-HESI. Suitable for various sizes of fuse tubes, such as: 5x20, 5x25, 6x30, etc..
  • ✯ Material: Nylon PA66 Housing, Fire retardant, Flame retardant..
  • ✯ Installation Method: DIN Rail Mounted, universal mounting foot to easily mount onto DIN rail..
  • ✯ Fuse terminal block for cartridge fuse inserts without indication. The lever-actuated fuse holder makes fuse insertion and extraction safe and easy..
  • ✯ Compact Fuse holder Terminal Block used in control circuit applications..
Check Stock

Electronics-Salon 20 Watt(VA) DIN Rail Mount Power Transformer Module (in: 115VAC, Out: 24VAC)

  • Secondary output: Full load 24VAC /0.84A, No load 27.6VAC..
  • Epoxy resin encapsulated safety isolating transformer. Epoxy resin cast in vacuum. Fire resistance property in accordance with UL94-V0. Dielectric strength: 3500V/1min 5mA. no-load loss less than 1.2 watt. Insulation grade: grade B. Temperature rise: less than 28C..
  • Screw terminal block easy to connect wires. With primary input fuse, fuse holder easy to replace the fuse. Output power indicator LED..
  • DIN rail mount carrier: High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail..
Check Stock

Electronics-Salon 5 Watt(VA) DIN Rail Mount Power Transformer Module (in: 115VAC, Out: 24VAC)

  • Secondary output: Full load 24VAC / 208mA, No load 28.8VAC..
  • DIN rail mount carrier: High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail..
  • Epoxy resin encapsulated safety isolating transformer. Epoxy resin cast in vacuum. Fire resistance property in accordance with UL94-V0. Dielectric strength: 3500V/1min. No-load current less than 20mA, no-load loss less than 0.5 watt. Insulation grade: grade B. Temperature rise: less than 22C..
  • Screw terminal block easy to connect wires. With primary input fuse, fuse holder easy to replace the fuse. Output power indicator LED..
Check Stock

Electronics-Salon DIN Rail Mount AC/DC 24V Control 8 SPDT 16Amp Pluggable Power Relay Module, G2R-1-E

  • OMRON G2R-1-E industrial power relays, switching current up to 16A at 250VAC (or 30VDC), and easy to replace pluggable relays..
  • LED indicator for each relay channel , relay coil protection by means of a freewheeling diode..
  • High quality screw terminal block, FR-4 fiber glass PCB, dual copper layers..
  • Panel mount or DIN rail mount versions are available. Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the carrier can be taken apart for panel mount use..
Check Stock

CZH-LABS DIN Rail Mounting Carrier Housing with Prototype Board PCB Size 20.3mm x 73mm.

  • PCB Dimensions: 20.3 x 73mm. Thickness : 1.6mm. Material : FR-4 (glass fiber). All holes are plated through, top and bottom solder pad are identical..
  • CN1 and CN2 3Pin terminal blocks pin pitch 5.0mm/0.197", other pads grid (pitch) 2.54mm / 0.1", hole diameter 0.9mm..
  • Terminal Block: Pitch 5.0mm/0.197" screw terminal blocks. Wire range 26 to 12AWG / 2.5mm square. Strip length 7mm / 0.28” Screws - M2.5, steel, Cr3+....
  • Taiwan DINKLE fireproof nylon material DIN rail mount carrier(not China low quality carrier), can support width 35mm, 32mm and 15mm rail..
  • External dimensions: L22.5mm x W78mm x H40.1mm.
Check Stock

Opto 22 SNAP-PAC-RCK16 - SNAP PAC 16-Module Mounting Rack

  • DIN Rail mount 30Amp 300V 2x12 position screw terminal block distribution module. Support for multiple module extension connections..
  • A / B position maximum current 30Amp(each position). A1~A12 total maximum current 30Amp(total positions). B1~B12 total maximum current 30Amp(total positions). A1~A12 / B1~B12 position maximum current 20Amp(each position). Maximum voltage 300V..
Check Stock