Categories

Best Din Standard Taps

6mm x 0.75 Metric Taper and Plug Tap Right Hand Thread M6 x 0.75mm Pitch

  • ...There are a total of two taps to facilitate the alignment of the tap and the tapping hole to ensure that the tap and the hole are perpendicular to each other and tapping smoothly. It also has a smoothing effect on the thread (removes burrs). Suitable for thick steel, rubber, aluminum, copper, and wood..
  • Good Helper: Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading. Can make new threads or re‑thread damaged or jammed threads.Number Of Threads: 3. Thread Tolerance Grade: 0.014. Through Hole/Blind Hole: Through Hole. Material: High speed steel. Tap Style: Straight groove. Thread Code: Standard thread..
  • Suitable for: Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc. Appropriate addition of coolant (e.g. water) can extend the service life when tapping..
  • Replacement for: The mini metric taps are mainly used for clocks, watches, low hardness wood and soft metal hole processing. Mainly used for hand use, tapping the vast majority of materials in through holed conditions..
Check Stock

OMAX 40X (Spring) Achromatic Objective Lens for Compound Microscopes

  • 40X Standard NA/0.65, DIN 160/0.17 achromatic objective lens.
  • Spring loaded for protecting lens and slides.
  • 1-year warranty against manufacturing defects.
Check Stock

Lisle 70860 Tap Socket

  • Ideal for use in areas where a T handle won't fit.
  • Sockets fits all number and fractional M.C.T.I. standard taps through 1/2".
  • Also fits 1/8" NPT taps and metric taps through 12mm manufactured to M.C.T.I. standards.
  • For more information check the main Lisle tool- 70940.
Check Stock

Baomain DDS238-4 （30-100）Single Phase DIN-Rail Kilowatt Hour kwh Meter 220V 100A

  • Rate Voltage:220V 230V 240V Rate Current:30(100A).
  • 220V Single Phase DIN-rail Kilowatt Hour kwh Meter.
  • Insulation Performance:AC voltage 2KV for 1 minute,impulse voltage 6KV.
  • Accuracy Class:Class 1 Starting Current:0.4%lb.
  • 35mm standard DIN rail installation,complying with standard DIN EN5002.
Check Stock

Dynafit - Binding Accessories - Alpine Touring Bindings - Dynafit Fork Superlite 150 z-6

  • For Dynafit's new Superlite 150 alpine touring binding, the z-6 "U spring" enables you to change the vertical release DIN values from the standard featured DIN 8 down to DIN 6 for smaller and lighter skiers. This is in regards to a forward release from the heal. The lateral release DIN value can be adjusted from 4-13 on this binding..
Check Stock

uxcell 5 Pairs Metric Hand Threading Tap Set M6 Thread 1mm Pitch Taper & Plug Milling Taps Straight Flutes High Speed Steel

  • Metric Taps: M6 x 1 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes..
  • Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic..
  • Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes..
  • Features: Straight flute design, downward chip removal. High speed steel tool is high hardness, high strength, good toughness, and wear resistance..
  • Tips: Add appropriate tapping oil for higher quality internal threads and more durable taps. Without any additional coatings, good for general purpose applications..
Check Stock

uxcell 5 Pairs Metric Hand Threading Tap Set M4 Thread 0.7mm Pitch Taper & Plug Milling Taps Straight Flutes High Speed Steel

  • Metric Taps: M4 x 0.7 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes..
  • Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic..
  • Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes..
  • Features: Straight flute design, downward chip removal. High speed steel tool is high hardness, high strength, good toughness, and wear resistance..
  • Tips: Add appropriate tapping oil for higher quality internal threads and more durable taps. Without any additional coatings, good for general purpose applications..
Check Stock

uxcell 5 Pairs Metric Hand Threading Tap Set M2 Thread 0.4mm Pitch Taper & Plug Milling Taps Straight Flutes High Speed Steel

  • Metric Taps: M2 x 0.4 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes..
  • Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic..
  • Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes..
  • Features: Straight flute design, downward chip removal. High speed steel tool is high hardness, high strength, good toughness, and wear resistance..
  • Tips: Add appropriate tapping oil for higher quality internal threads and more durable taps. Without any additional coatings, good for general purpose applications..
Check Stock

uxcell 5 Pairs Metric Hand Threading Tap Set M1.4 Thread 0.3mm Pitch Taper & Plug Milling Taps Straight Flutes High Speed Steel

  • Metric Taps: M1.4 x 0.3 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes..
  • Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic..
  • Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes..
  • Features: Straight flute design, downward chip removal. High speed steel tool is high hardness, high strength, good toughness, and wear resistance..
  • Tips: Add appropriate tapping oil for higher quality internal threads and more durable taps. Without any additional coatings, good for general purpose applications..
Check Stock

Hanson 12008 1\ Rd Hex Plain Die Stock for Tap Die Extraction

  • CUT AND RENEW THREADS: The ABN Metric and SAE Standard Tap and Die 60-Piece Rethread Set Rethreading Kit for Cutting External and Internal Threads is a comprehensive set for cutting and renewing external and internal threads to exact standards.
  • SIZES: Metric taps 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
  • UNC taps 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF taps 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • Metric dies 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
  • UNC dies 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF dies 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • BUILT TO LAST: Constructed from hardened alloy steel for maximum strength and longevity.
  • Can cut materials such as cast iron, steel, aluminum, copper.
  • EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • CONTENTS: Package includes coarse and fine threads numbered taps and dies from #4-40 to #12-24 and fractional taps and dies from 1/4"-28 to 1/2"-20, 1/8"-27 NPT tap and die, metric tap and dies from M3x0.5 to M12x1.75, thread gauge, tap handle, die h....
Check Stock

360 -Degree Swivel Kitchen Sink Faucet Aerator Water Saving Tap Aerator Faucet Nozzle for Kitchen, Bathroom Faucet (Shorter Style 1PC)

  • One Button 2 Water Modes - By pressing a button, convert soft bubble stream to strong spray..
  • NO Splash - This unit produces a champagne effect flow that negates any splash back in the basin at the same time increasing wetting ability and performance..
  • Simple Installation - Directly installed by hand without tools,done in seconds.Including the different sizes of gaskets,so you can directly install it after you receive the package.★Steps Installation please review the Details Page..
  • Fits 99% Taps - Fits all standard taps with M22 external thread and internal thread M24 - gasket included Features: Save energy: Water saving 30%~70% (compared with standard bubbler) Increase the water pressure: Prevent water flowed, and the air is mixed with water is good,the water feels soft,enhanced water momentum,cleaning more convenient..
  • Guarantee --- 30 days money back. Suitable for 99% kitchen or bathroom taps. IF IT CANNOT FIT YOUR FAUCET OR HAVE ANY PROBLEMS PLEASE SEND US EMAIL, WE WILL 100% REFUND YOU，SO PLEASE SEND US EMAIL FIRST ..
Check Stock

WIDIA GTD GT275016 Victory GT27 HP Tap, Full Bottom Chamfer, Right Hand Cut, 6 Flutes, Forming, 7/16-20, HSS-E-PM, TiCN Coating

  • Advanced forming geometries designed for superior tap performance steel and stainless steel.
  • Manufactured with fine-grain micro grain carbide for exceptional wear life.
  • Ideal for long production runs where fewer tool changes mean greater productivity.
  • Runs up to 4x faster and lasts up to 4x longer than conventional high-speed steel taps, Excellent thread quality and tap performance.
  • Form E Bottoming Entry Taper, DIN Length ANSI Shank.
Check Stock

AmScope A100X 100X (Oil) Achromatic Microscope Objective

  • This brand new 100X (spring, oil) Achromatic microscope objective lens fits common size (DIN/JIS standard) compound microscopes.
Check Stock