Categories

Best Din rail Electronic Watt hour Meter

Electronics-Salon 20 Watt(VA) DIN Rail Mount Power Transformer Module (in: 115VAC, Out: 24VAC)

  • Secondary output: Full load 24VAC /0.84A, No load 27.6VAC..
  • Epoxy resin encapsulated safety isolating transformer. Epoxy resin cast in vacuum. Fire resistance property in accordance with UL94-V0. Dielectric strength: 3500V/1min 5mA. no-load loss less than 1.2 watt. Insulation grade: grade B. Temperature rise: less than 28C..
  • Screw terminal block easy to connect wires. With primary input fuse, fuse holder easy to replace the fuse. Output power indicator LED..
  • DIN rail mount carrier: High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail..
Check Stock

Electronics-Salon 5 Watt(VA) DIN Rail Mount Power Transformer Module (in: 115VAC, Out: 24VAC)

  • Secondary output: Full load 24VAC / 208mA, No load 28.8VAC..
  • DIN rail mount carrier: High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail..
  • Epoxy resin encapsulated safety isolating transformer. Epoxy resin cast in vacuum. Fire resistance property in accordance with UL94-V0. Dielectric strength: 3500V/1min. No-load current less than 20mA, no-load loss less than 0.5 watt. Insulation grade: grade B. Temperature rise: less than 22C..
  • Screw terminal block easy to connect wires. With primary input fuse, fuse holder easy to replace the fuse. Output power indicator LED..
Check Stock

Electric kWh Meter, 100A 120/240 Volt, 3-Wire, 60Hz

  • ELECTRIC METER – State-of-the-art, fully solid-state kWh meter with 800 pulse per kWh pulse output..
  • SINGLE PHASE – Up to 100 amps, 120/240-volt, 3-wire, 60Hz..
  • ACCURATE – 1% accuracy class, LCD readout in hundredths of a kWh, to 99999.99 kWh..
  • COMPACT – Simple DIN-rail mounting designed for symmetrical load..
  • LCD DISPLAY – Non-resettable LCD display. Usage data is maintained through power outages..
Check Stock

TRENDnet 6-Port Hardened Industrial Gigabit PoE+ DIN-Rail Switch 4 x Gigabit PoE+ Ports Shared Gigabit Port RJ-45/SFP Dedicated SFP 120W Power Budget IP30 Lifetime Protection Black TI-PG62

  • ETHERNET PORT INTERFACE: 4 x Gigabit PoE+ ports, 1 x shared Gigabit port (RJ-45/ SFP), 1 x Dedicated SFP slot.
  • POE POWER & SWITCHING CAPACITY: The 6 Port Gigabit PoE+ DIN-Rail Switch has a 12 Gbps switching capacity and 120 Watt PoE+ power..
  • EXTREME TEMPERATURE SWITCH: This Gigabit PoE+ Switch is equipped with a rugged IP30 rated enclosure and designed to withstand a high degree of vibration, shock, protection against ESD / EMI / surge, and operate with a wide temperature range (- 40 – 75 °C (- 40 - 167 °F)) for harsh environments..
  • DIN-RAIL & WALL MOUNT KIT: This 6-port Gigabit PoE+ industrial switch comes with an integrated DIN-rail mount and mounting hardware..
  • REDUNDANT POWER: The 6 port network switch has dual redundant power inputs with overload current protection (power supply sold separately: models: TI-S15052, TI-S24052, TI-S12048, TI-S24048, 48VDC3000).
Check Stock

Electrodepot Slotted Aluminum DIN Rail, 35 Millimeters x 8 Inches, Silver – 8 Pieces with 16 Number 10 Stainless Steel Screws

  • DIMENSIONS: Standard 35 mm width and 8 inches length (203.20 mm), made of lightweight, resistant aluminum material.
  • VERSATILE: Perfect for any type of electronic component or device, such as relays, contactors, circuit breakers, electric boxes, terminal blocks and more.
  • UNIVERSAL RAIL: Complies with international EN/IEC and RoHS standards to guarantee complete adaptability for any DIN-compatible device or component.
  • EASY INSTALLATION: Practical design that includes 8 slots for easy installation at home, industrial or for scientific applications.
  • PACKAGE CONTENTS: This item includes 2 aluminum DIN mounting rails and 4 x #10 Phillips stainless steel truss head screws (1/2").
Check Stock

EKM Metering - Indoor Enclosure Kit

  • Houses any kWh meter that EKM Metering Offers..
  • Surface-mounting or flush-mounting covers included..
  • This custom enclosure makes for a very clean installation.
Check Stock

BreeRainz Din Rail Cutter, Double Groove Rail Cutter Tool w/Dual Scale Measuring Ruler, for 1.4 Inch Iron Aluminum Rails

  • 【Double Groove Rail Cutter】- Featuring 2-groove design. Come with long lever handle. This double groove rail cutter can precisely cut both iron & aluminum Din rails at a time with less effort..
  • 【Smooth Rail Incision】- Differ from band saws incision, sharp blade on the professional din rail cutter can ensure the rail incisions neat & smooth. No complex operation. Just press the handle and cut the rails straight.
  • 【Dual Scale Measuring Ruler】- The new version of manual rail cutter has a dual scale ruler included, which allows you to quickly adjust the cutting length and easily cut rails to your desired sizes..
  • 【Wide Cutting Range】- Various sizes of steel & Aluminum DIN rails can be cut. 20" total cutting length. You just need push the slider, set the cut length, insert the rails and get the rails you need right away..
  • 【Practical Rail Cutting Tool】- Simple Structure w/ portable size. Manual din rail cutter provides a perfect solution for electric power, construction and completing other tedious cutting tasks..
Check Stock

EKM Metering Electric kWh Meter and Indoor Enclosure Kit Bundle - 3-Wire, Single Phase, 120/240 Volt Pass-Through kWh Energy Meter with Professional, Custom-Designed Indoor Enclosure Cover Kit

  • KWH ELECTRIC METER – The 120/240 volt, three-wire, 100A, 60Hz kWh metering system is built to meter and monitor household, apartment, and solar power with its non-resettable LCD screen.
  • COMPACT, EASY-TO-INSTALL DESIGN – The kilowatt usage meter is designed for simple DIN-rail mounting, as wires pass through 3/8″ diameter tubes. Usage data is maintained through power outages..
  • METERING LEADER – EKM Metering is a trusted brand of submeters and omnimeters. The Electric kWh Meter features LCD readout in hundredths of a kWh (up to 99999.99 kWh) with 800 pulses per kWh..
  • INDOOR ENCLOSURE KIT INCLUDED – Also from EKM Metering Inc., the adjustable Indoor Enclosure Kit adds a professional look to the Electrical kWh Meter so that only the face of the meter is exposed..
  • BACKED BY THE AMAZON A TO Z GUARANTEE: Receive a full refund on this EKM Metering Bundle (includes one Electric kWh Meter and one Indoor Enclosure Kit) if you are unsatisfied for any reason..
Check Stock

NORJIN UK-2.5N DIN Rail Terminal Blocks Set, Including 20Pcs UK-2.5N 12 AWG Terminal Blocks + 4Pcs End Covers + 4Pcs End Brackets + 2Pcs Ground Blocks  + 2Pcs Fixed Bridge Jumpers ＆ Aluminum Rail

  • 【UK-2.5N DIN Rail Terminal Blocks Kit】Comes with 20pcs UK-2.5N 12 AWG terminal blocks, 2pcs ground blocks, 2pcs jumpers, 4pcs E/UK end brackets, 4pcs UK-2.5BG end covers and 1pcs 8" aluminum rail .
  • 【Terminal Blocks UK2.5B】Terminal Blocks UK2.5B is made of  nylon PA66 housing, alloy copper bodies and nickel-plated Screws. Rated voltage: 600V, IEC 690V. Rated current: 20A, IEC 32A.Flexible (AWG): 24-12. It can connect two conductors with ease and can be used on DIN Rail 35mm, steel or aluminum. .
  • 【8in Aluminum DIN Rail】Length : 203mm/ 8".
  •   Height : 7.5mm/ 0.3".   Thickness : 1.2mm/ 0.047".   Guide rails can be used to install circuit breakers, contactors, surge protectors, modular jacks, motor soft starters, PLC, relays, terminals and other electrical appliances. .
  • 【Ground Terminal Blocks Connectors】The grounding terminal blocks provide an easy-to-identify, convenient, neatly organized grounding bus that is mounted on the DIN rail. The protective terminal blocks has strong clamps to ensure tight fixation on DIN rails to achieve the PE function. .
  • 【Bridge, End Stopper Bracket, End Cover】The bridge can be insert at the top clamp space of UK terminal blocks, potential distribution can be contact quickl....
Check Stock

UCTRONICS Raspberry Pi DIN Rail Mount, Compatible with Arduino, RPi 4B/3B+/3B/2B/B+, Pi Zero, Raspberry Pi Pico

  • A DIN option to provide a wide range of flexibility in mounting for multiple SBC devices, such as Raspberry Pi 4, 3 B/B+ and all other A, B and Zero Models, Raspberry Pi Pico, Arduino Uno/Mega 2560, BeagleBone series..
  • The mounting bracket is made of 1.2mm carbon steel, attaches to both the SBC and the DIN rail sturdily, multiple optional mounting holes help you mount the different boards and the DIN rail clips in both horizontal and vertical way..
  • Recommended for creating an array of Raspberry servers, home lab and other industrial projects, make it very professional and easy to maintain when needed..
  • Has no hassle to mount in the 19" rack with UCTRONICS DIN rail rack mount, please search for ASIN B09823N6FY to get it..
  • You'll be getting a mounting bracket, 2 DIN rail clips, and standoffs, and screws..
Check Stock

DIN Rail Mount Bracket for Raspberry Pi A+ B+ 2B 3B 3B+ 4B Zero Arduino Uno Mega Mkr BeagleBone

  • This product can easily mount Raspberry Pi / Arduino / BeagleBone to DIN rail, expand their range of applications to industrial control..
  • Supports Raspberry Pi 1 Model A+ / Pi 1 Model B+ / Pi 2 Model B / Pi 3 Model B / Pi 3 Model B+ / Pi 4 Module B / Pi Zero / Pi Zero W, Arduino Uno R2 /....
  • High quality DIN rail feed and mounting very stable, can support width 35mm / 32mm / 15mm DIN rail. Support horizontal and side installation. The....
  • Thickness 1.5mm/0.06" aluminum bracket sheet, the weight is very light and very strong..
  • Package included: 1x Aluminum bracket, 1 pair DIN rail adapter feed and mount screws, 6x M2.5x10mm standoffs, 12x M2.5x6 pan head screws, 4x M2x12mm....
Check Stock

TRENDnet 8-Port Hardened Industrial Unmanaged Gigabit PoE+ DIN-Rail Switch, TI-PG80, 200W Full PoE+ Power Budget, 16 Gbps Switching Capacity, IP30 Rated Network Switch, Lifetime Protection, Black

  • ETHERNET PORT INTERFACE: 8 x Gigabit PoE+ Ethernet ports.
  • FULL POE+ POWER BUDGET & SWITCHING CAPACITY: The Gigabit PoE+ switch supplies up to 30 Watts of PoE / PoE+ power per port with a 200 Watt PoE power budget and allows for a 16 Gbps switching capacity..
  • DIN-RAIL & WALL MOUNT KIT: This 8-Port Gigabit PoE+ network switch comes with an integrated DIN-Rail mount and mounting hardware..
  • EXTREME TEMPERATURE SWITCH: The metal hardened IP30 rated Gigabit PoE+ Ethernet switch is equipped with a rugged IP30 rated enclosure and designed to withstand a high degree of vibration, shock, protection against ESD/EMI/surge, and operate with a wide temperature range (- 40 – 75 °C (- 40 - 167 °F)) for harsh environments..
  • REDUNDANT POWER: The 8 port switch has dual redundant power inputs with overload current protection (power supply sold separately: model: (TI-S24048).
  • TRENDnet LIFETIME PROTECTION: All metal TRENDnet switches come with lifetime manufacturer protection..
Check Stock

OONO DIN Rail Mount 30A/300V 2x12 Position Screw Terminal Block Distribution Module.

  • DIN Rail mount 8 Channel 10Amp SPDT Power Relay Module, DC 5V Version..
  • JS1-5V-F Power Relays. LED indicator for each relay channel. Darlington transistors circuit driving relay, improve the reliability of action..
  • DIN rail mount carrier: High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail. FR-4 fiber glass dual layers PCB..
  • High quality terminal block: Pitch 5.0mm/0.197.
Check Stock