Best Diode Tester

Armada Technologies Pro48K Multi-Function Irrigation Test Kit with Tone Probe and Case

  • 【Overload Protection for Longer Life】Auto circuit breaker protect the tool from overload through the inner circuit breaker to enables product last longer and durable..
  • 【4 Adjustable Modes probe tester】AC detects the maximum and minimum voltage, supply frequency and duty cycle of the circuit under test.
  • DC detects the voltage value of the circuit under test.
  • In addition,the circuit tester can also detects the resistance between the circuit probe under test and the auxiliary ground.
  • Diode Test can quickly test the operation of the diode assembly and determines if it is conducting..
  • 【Easy to Operate】Power probe built-in head light allow you to work in the dark area, there will be beep tone when detecting,operate the tool without looking at the menu once you are familiar with the tone.Provide 4.9ft of electrical wire for easy use..
  • 【WIDE Vehicles Application】 Power probe tester can support 6-30V cars, boats, trailers, ATV, motor homes and many other vehicles. With the ability to power components such as radiator fans, starter motors, relays, window regulators, windshield wipers, etc. Powered by the car battery or cigarette lighter, no extra battery or cable required.
  • 【3-YEAR WARRANTY Circuit Tester】 For damages caused by non-human factors....
Check Stock

HoldPeak Digital Smart SMD Tester 6000 Counts HP-990C DMM Handheld Resistance Capacitance Tester,Digital Multimeter Auto Scan with Spare Test Pins (Battery Included)

  • ✅【High Quality & High Accuracy】The tester is automatically identified the passive component.Precision LCR Meter 6000 counts with the range of Resistance:600Ω~60MΩ;Capacitance:9.999nF~99.99mF.
  • Diode Test:Open Voltage:3.0V,Testing Current:1.5mA.
  • ✅【Non-rusting】The entire outer surface of the tester case has been with thermo plastic elastomer, and Spare Test Pin are included which has been gold-plated, so that can be reduce pin contact resistance and prevent it from rusting..
  • ✅【Wide Range of Application】With the function of the continuity and Diode Test,you can used it for many applications,such as components verification and sorting, production lines, laboratory and service center, in-field repair,battery power test and more..
  • ✅【Auto Power Off】If the tester is idle for more than 15 minutes, the tester will automatically turn off the power.HOLDPEAK 990 SMD tester is a handheld and battery operated small Tool, very convenient to operate and it is easy to measure SMD..
  • ✅【100% Warranty Guarantee】HOLDPEAK come with 2 years warranty and lifetime technical support,if you have any questions about our product,just feel free to contact us, your satisfactory purchase experience is our greatest hope! Looking forward ....
Check Stock

Capacitance Meter Capacitor Tester Capacitance Resistance Meters Ohmmeters Resistor LCR Meter Measures AC/DC Current Capacitance Frequency Diode Test Continuity Test Temperature (UT601)

  • ☛ WIDE APPLICATION---With a broad capacitance measurement range and precise accuracy, the capacitance meter capacitor tester can measure resistance, transistor, diode and continuity buzzer.
  • ☛ LARGE DISPLAYING SCREEN---With large displaying screen, the capacitance meter capacitor tester allows you to read clearly and easily, convenient to read.
  • ☛ RANGE SWITCH---The range switch enables you to choose related resistance, capacitance and inductance to measure, according to your relative data, easy to operate.
  • ☛ SAFE TO OPERATE---Adopting durable insulating cover, the capacitance meter capacitor tester is safe to operate. Accurate and clear test port will simply your process.
  • ☛ LOW BATTERY INDICATION---The capacitance meter capacitor can be used in measuring the circuit designed capacitance of cable, switch and PCB layout. Diode and buzzer continuity measurements, inductance measurement, low battery indication.
Check Stock

Transistor Meter Aideepen LCR-TC1 Multi-Function Capacitance Resistance ESR Tester 1.8 Full Color Display Transistor Meter for Diode Triode Capacitor Resistor Transistor LCR ESR NPN PNP MOSFET

  • 【Wild Application】:1.8" Full Color Display,Automatic detection of NPN and PNP transistors, n-channel and p-channel MOSFET, diode (including double diode), thyristor, Mega328,BJT, resistor and capacitor and various electric transistor testing..
  • 【Built-in Battery】:Built-in lithium battery, convenient and effective, the indicator light shows green when fully charged. Warm Reminder: The charging input voltage is 4.5V, please do not use it under overpressure, otherwise the tester will be damaged..
  • 【Add IR Decoder】: After the component detection is completed, the infrared remote control at the tester "IR" test hole, press the remote control key, the tester will be display the user code & data code and the corresponding infrared waveform after the successful decoding.
  • 【Auto shut-down Function】: Our advanced electronic transistor tester owns auto shut-down function.Convenient and practical..
  • 【Extra accessories】: use accessories, more convenient and efficient to complete your project(Please refer "Product guides and documents"to get user manual).
Check Stock

Amprobe UAT-620 Underground Utility Locator Kit with Clamp

  • [Multifunctional Circuit Tester] The circuit tester can quickly and efficiently test all 6V to 24V car circuit systems, and is the best tool to shorten the diagnosis time of automotive circuit systems. It is perfectly for polarity test, continuity test, components test, jumper lead operation, grounding test, short circuit following and locating, etc..
  • [Polarity Test & Continuity Test] When the polarity of the circuit under test is unknown, this circuit tester can help you quickly identify the positive and negative poles of the circuit, and whether the circuit is in a continuous state or an open state. The red light is on when the probe tip is in contact with the positive pole or the circuit is open, and the green light is on when the probe tip is in contact with the negative pole or the circuit is in a continuous state..
  • [Component Test & Diode Test] Contact the probe tip to the positive terminal of the tested component to active the component. It can detect whether there is a large current flowing through the element and whether the negative electrode of the detection element is well grounded. Quickly test diode assembly operation and determine if circuits are opened or continuous. When the grounding is good, the green light will be on and a "beep" wi....
Check Stock

Extech MN24-KIT Electrical Test Kit

  • MN24 Digital Multimeter with large, easy to read display measures AC/DC Voltage, DC Current, Resistance, and Continuity and features Diode and Battery tests.
  • Included 40130 Non Contact Voltage Detector detects AC Voltage from 100VAC to 600VAC with a Flashing LED and Audible beeper.
  • Included ET15 Receptacle Tester tests for faulty wiring in 3 wire outlets with a standard North American 3 prong Plug.
  • Everything you need to stay safe and work smart on DIY home electrical projects.
  • The MN24 KIT includes the MN24 Digital Multimeter, Multimeter Test Leads, 40130 Non Contact Voltage Detector, ET15 Receptacle Tester, Storage Case.
Check Stock

Autel PS100 Power Circuit Probe Kit with 40Ft Cable, Automotive Circuit Tester,12V 24V Electrical System Diagnosis Tool AC DC Digital Voltage Short Finder, Car Voltage Tester Digital Voltmeter

  • 【CIRCUIT TESTER】The PS100 Autel circuit tester automotive tool will test the positive, negative, and open circuit easliy, also testing for continuity, diagnosing circuit failures, checking good and bad grounds, activating components on and off the vehicle, sensing MIN /MAX voltage, etc..
  • 【ELECTRICAL TESTER】PS100 electrical tester can easy to read AVOmeter, so you can easily use your fingers to control powerscan diagnosis of DC Voltage, AC Voltage, Resistance and Diode of 12v-24v electrical systems..
  • 【FLASHLIGHT】 Built-in Flashlight enables you to work in the dark. Even in a dark environment where you can't see clearly, PS100 fuse tester automotive kit can give you a good view..
  • 【PROTECT YOUR VEHICLE】Autel powerscan can immediately check for bad ground contacts and quickly track down shorts without losing fuses. Also, the unit provides higher safety for the user, as it is protected by a circuit breaker, which is a safe measure to protect the unit and your components from overload..
  • 【LONG CABLE】The PS100 powerscan circuit tester contain 20ft (extendable)....
Check Stock

Usatest Power Circuit Probe, Powerscan Automotive Circuit Tester,12V 24V Electrical System Diagnosis Tool AC DC Digital Voltage Short Finder,Car Voltage Tester Digital Voltmeter

  • 【CIRCUIT TESTER】The USA-003 circuit tester automotive tool will test the positive, negative, and open circuit easliy, also testing for continuity, diagnosing circuit failures, checking good and bad grounds, activating components on and off the vehicle, sensing MIN /MAX voltage, etc..
  • 【POWER SWITCH】 With a flip of the power switch, you have an instant hot/ground lead for powering up electrical components like cooling fans, relays, testing fuses etc..
  • 【PROTECT YOUR VEHICLE】USA-003 powerscan can immediately check for bad ground contacts and quickly track down shorts without losing fuses. Also, the unit provides higher safety for the user, as it is protected by a circuit breaker, which is a safe measure to protect the unit and your components from overload..
  • 【ELECTRICAL TESTER】USA-003 electrical tester can easy to read AVOmeter, so you can easily use your fingers to control powerscan diagnosis of DC Voltage, AC Voltage, Resistance and Diode of 12v-24v electrical systems..
  • 【FLASHLIGHT】 Built-in Flashlight enables you to work in the dark. Even in a dark environment wh....
Check Stock

TOPDON AB101 Car Battery Tester 12V Car Battery Load Tester on Cranking Charging Systems, 100-2000 CCA Automotive Alternator Analyzer for Cars/SUVs/Light Trucks with Flooded AGM Gel Types

  • BATTERY HEALTH TEST ➤ AB101 car battery tester is highly recommended by Scotty Kilmer and BestReviews. By directly benchmarking the battery health, this battery analyzer gives advice on whether to replace the battery. Besides, the cranking and charging system tests are also included..
  • WIDE TEST RANGE ➤ “Will it work on my battery?” (most commonly asked question), AB101 battery tester is tailor-designed for most of 12V batteries such as regular flooded, AGM flat plate, AGM spiral, and Gel batteries and strictly follow the battery rating standards- CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB..
  • CRANKING & CHARGING TESTS ➤ Auto battery tester AB101 displays the test results (actual cranking voltage & cranking time) in car starter system in seconds, telling if your cranking system is working as expected. AB101 battery load tester conducts an integrated check on 12V charging system to ensure a normal generator output, perfectly working rectifier diode and under controlled charging current..
  • UNPARALLELED USER EXPERIENCE ➤ Compared with traditional load battery testers, this car battery tester is much light and user-friendly. An easy-to-read backlight screen shows you results in 3 secs. Multilingual: English, Russian, Spanish, French, German, Ital....
Check Stock

KONNWEI KW710 Car Battery Tester 6V 12V 24V, Battery Load Tester Automotive 100-2000CCA Digital Auto Battery Analyzer Alternator Starter Tester for Car Truck Motorcycle Marine ATV SUV

  • 【6V-12V-24V CAR BATTERY TESTER】 KW710 is the top 1 battery tester automotive which can works on all 6V, 12V and 24V batteries(100-2000 CCA), testing result up to 99.99% accuracy, also great alternator and starter tester, the most reliable battery load tester on the market..
  • 【LARGE COLOR SCREEN + ENHANCED CLIPS】compared to other 12V battery testers, KW710 is the first battery analyzer that adopts a large color screen and rugged design. It also upgraded the connection cable(8.8ft) and enhanced the clips to reduce the measurement error..
  • 【ADVANCED VOLTAGE WAVEFORM FUNCTION】KONNWEI is the only auto battery tester manufacturer that can catch the voltage changing and show the waveform into graphing, up to 20 points in one second, helps to track the real-time voltage to find the battery issue. Even can be uploaded to computer compare them to analyze the in-car system..
  • 【CRANKING AND CHARGING SYSTEM TEST】 KW710 provides overall batteries data in milliseconds including voltage, internal resistance, cold cranking amp, battery health and charge status. Also can test 6V, 12V and 24V car charging system to make sure the output voltage of the generator is in a regular condition, the rectifier diode works fine and the charging current is normal status.....
Check Stock

CMTOOL Power Circuit Probe Kit 9-30V Automotive Circuit Tester, Test Light Automotive Relay Tester Kit, Car Electrical Tester Digital Voltage Tester Continuity Tester Tool with 6m/20ft Extension Cable

  • ...5V Power Supply, Fuel Injector Test, Positive/Negative Test, Setting, Online Update.【Test Applications】Continuity Test, Signal Circuit Test, Activate Components in You Hand/Vehicle/W/Ground, Check for Bad Ground Contacts, Follow&Locate Short Circuits, Trailer Lights and Connection Test..
  • 2.【Power Circuit Probe Tester with Fast Intelligent Test】Automotive circuit tester can automatically identify the voltage value, resistance value, and positive and negative polarity of the detected circuit (red light is positive, green light is negative)..
  • 3.【Automotive Circuit Tester with Digital Multimeter Mode】Automotive circuit tester contains the common parameters of multimeters, and can quickly test the DC voltage, resistance, and diode in the circuit system, current, and frequency, bringing a lot of convenience to users..
  • 4.【Electrical Tester with Oscilloscope Function】Circuit probe tester with 6M extension test lead, can display the parameter curve diagram of the tested component, such as voltage, frequency, time, etc. Users also can observe the test results more directly by adjusting the displayed interval..
  • 5.【Power Circuit Tester Kit with Component Activation Function】There is 4 activation modes for the component activation function of the ....
Check Stock

KONNWEI KW720 Car Battery Tester 6V 12V 24V W/Printer, Battery Load Tester Automotive 100-2000CCA Digital Auto Battery Analyzer Alternator Starter Tester for Car Truck Motorcycle(Paper Included)

  • 【PROFESSIONAL-GRADE 6V-12V-24V CAR BATTERY TESTER】 KW720 is the top 1 battery tester automotive which can works on all 6V, 12V and 24V batteries(100-2000 CCA), testing result up to 99.99% accuracy, also great alternator and starter tester, the most reliable battery load tester on the market..
  • 【LARGE COLOR SCREEN + ENHANCED CLIPS + THERMAL PRINTER】compared to other similar 12V battery testers, KW720 is the only battery analyzer that adopts a very large color screen and rugged design. It also upgraded the connection cable(8.8ft) and enhanced the clips to reduce the measurement error. Besides you can print the testing data at any time with the built-in thermal printer(paper included)..
  • 【ADVANCED VOLTAGE WAVEFORM FUNCTION】KONNWEI is the only auto battery tester manufacturer that can catch the voltage changing and show the waveform into graphing, up to 20 points in one second, helps to track the real-time voltage to find the battery issue. Even can be uploaded to computer compare them to analyze the in-car system..
  • 【CRANKING AND CHARGING SYSTEM TEST】 KW720 provides overall batteries data in milliseconds including voltage, internal resistance, cold cranking amp, battery health and charge status. Also can test 6V, 12V and 24V car charging syste....
Check Stock

AITRIP LCR-T7 Transistor Tester TFT Diode Triode Capacitance Meter LCR ESR Meter for Measuring Triodes Diodes Resistors Capacitors, Inductors, Thyristors

  • This LCR-T7 Transistor Tester Built-in high capacity rechargeable lithium ion battery. Lithium ion battery voltage detection..
  • Used to detect NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery etc.
  • Automatic detection of zener diode 0.01-30V, self test with automatic calibration.
  • The data code and infrared waveform will be displayed,when the detector is successfully decoded(tips:After detection, align the infrared remote control with the "IR" light, then press the button in the remote control).
  • One key operation. Auto power off (timeout settable)..
Check Stock