Best Diode Type Thermistor

Digital Multimeter Tester, Electrical Voltmeter Tester, Volt Multi Meter, Car Battery Tester Circuit Tester

• Functions：Accurate measurement of Non-contact voltage test, AC/DC voltage, current, resistance, continuity, frequency, capacitance, and diode, temperature, wire on-off, Battery test. This multimeter can diagnose the automotive, industrial, and household electrical issues..
• Durable：The outer layer of the digital multimeter is wrapped with a sturdy silicone protective cover. Generally, a drop will not affect the integrity of the multimeter. The automatic range of the digital multimeter is 6000 ranges to ensure the long-term accuracy of the data.
• Convenient： Designed with a digital LCD display and 'Backlight', showing the reading clearly in dim environment areas. There are two pen holders on the back of the digital multimeter for easy placement.
• Safety：Passed CE, RoHS certification, with dual fuses and thermistor protection circuits for anti-burn and explosion-proof. Any current range will be protected stably.
• Practicality: Digital multimeter can record measurement data, which is more convenient. Multimeter with a flashlight lighting..

uxcell NTC Thermistor Resistors 10D-9 2A 10 Ohm Inrush Current Limiter Temperature Sensors Pack of 20

• [Small Probe]: NTC thermistor can measure the gap temperature that other thermometers cannot..
• [High Sensitivity]: The thermistor is high sensitivity and wide operating temperature range(-50℃~125℃), which is easy to use..
• [Widely Used]: Thermistors can be used as electronic circuit components for instrument circuit temperature compensation and temperature difference cold junction temperature compensation..
• [Good Stability]: Thermistor has good stability and strong overload capacity..
• B3950 100K 1% 60mm Thermistor. The model can be judged according to the length of the thermistor cable..

LG EBG60663207 Genuine OEM PTC Thermistor Assembly for LG Refrigerators

• This LG PTC Thermistor Assembly is a genuine OEM (Original Equipment Manufacturer) part manufactured to exact specifications.
• Replacement LG brand Refrigerator PTC Thermistor Assembly or Positive Temperature Coefficient Thermistor starts the compressor motor.
• LG EBG60663207 Refrigerator PTC Thermistor Assembly Is also called the Compressor Overload and Start Relay.
• High quality LG OEM EBG60663207 Refrigerator PTC Thermistor Assembly is manufactured with premium materials for durability and exact fit, be sure to....
• Life's Good when choosing Genuine LG OEM Factory parts for your LG appliances.

Ametherm SL22 1R020 (Pack of 2) NTC THERMISTOR,ICL 1 OHM 20% 20A 22MM, (Also SG100, SG301)

• Pack With: Package of 10pcs 1% accuracy 10K thermistor, 60mm / 2.4in line length..
• High Sensitivity: The thermistor is high sensitivity and wide operating temperature range, which is easy to use..
• Wide Use: Thermistor can be used as electronic circuit component for instrument line temperature compensation and temperature difference cold junction temperature compensation..
• Small Size: The NTC thermistor is able to measure the gap temperature that other thermometers can't measure..
• Good Stability: The thermistor has good stability and strong overload capability, easy to process into complex shapes..

Upgrade M3 Hex Screw in Fixing Thermistor 100K 3950 Temperature Sensor for Ender 3 V2 Pro CR10 and Other 3D Printer Extruder Hotend 100K 3950

• M3 screw for installation is Quik and Durable, Flexible and Long Lasting, longer life span.
• DIY players can also modify BLOCK by themselves. Make an M3 threaded hole in BLCOK, then you can use this thermistor.
• Thermistor model: NTC 100K 3950. HERE is the firmware setting: *13:100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " &"Hotend "All In ONE"....
• For the printer which uses NTC 100K 3950 thermistor, Then this thermistor is plug and use.

Thermistor for Dometic 3851210025 Refrigerator,RV Refrigerator Sensor Replacement for Dometic Refrigerator RM Series W 2 Wire Thermistor RM1350 2351 2354 2410 2620 2652 2852 2862 3807

• Replacement for Dometic refrigerators 3851210025 thermistor. Replaces Part Numbers: 2931863035 2931863076 3851059042.
• The thermistor for dometic rv refrigerator adopts environmental protection epoxy resin coating and double-layer sealing, with better insulation....
• Fix for Dometic refrigerator temperature is over cold freezing or hot spoiling.Just try to replacing our dometic 3851210025 refrigerator thermistor....
• Compatible with almost all Dometic refrigerators models starting RM with two wire thermistor:RM1350 RM2351 RM2354 RM2410 RM2451 RM2454 RM2551 RM2554....
• The model name of thermistor may be different,details pls see below product numbers.3-year warranty .If you have any question pls feel free to contact....

Traceable Scientific Thermistor Thermometer with Calibration; USB Probe

3PCS HT-NTC100K Thermistor Sensor for Creality Ender 3 v2 Upgrade 3x15mm 3950 Compatible with E 3D V6 Volcano PT100 Ender-3-5 Pro CR10 3D Printer

• 【Ender 3 Thermistor, Upgrade HT-NTC100K Thermistor】Cartridge temperature sensor. Metal head diameter: 3mm, head length: 15mm,cable wire length: 1 meter,connector: XH2.54 2PIN, （Suitable for heating blocks with holes of 3mm*15mm-3mm*20mm）.
• 【Widly Compatibility】Product recommended operating temperature -50 °C ~ +280 °C, can replace the cartridge K-type thermocouple temperature sensor. Suitable to print multi kinds of filament.Compatible with the heatblocks with 3mm hole,such as: V6 Volcano PT100 type heated block,CR10 plated copper high temperature heating block,etc.
• 【High Stability and Accuracy 】Encapsulated in copper case,copper material has better thermal conductivity than stainless steel and improves accuracy.Secured with high temperature adhesive,high stability, no falling off.The internal temperature package to ensure the maximum service life with precision temperature measurement..
• 【Long Service Life】Compared with other products of the same type that are insulated with ordinary heat shrinkable tubes, this product uses glass fiber with a temperature resistance of 400C degrees for insulation to avoid the possibility of thermal short circuit during high temperature work. Thereby increasing the service life..

Anet 5pcs Thermistor NTC 3950 100K ohm Thermistor for RepRap 3D Printer Heatbed or Hot End 3D Printer Kit Accessories - White 5PCS

• Anet ​3d printer 100k thermistor 1.2m can be used on both of the heated bed and the extruder for 3d printers.
• The thermisor is compatible with most 3D printers in the market such as ender3, ender3 pro, ender3 V2, CR-10, hictop d3 hero eAnet 3d printer tc.
• There is a 2 pin female connector on the thermistor for 3D printer.
• Wire length for the thermistor: 1m/47 inches..
• Recommended parameters for the thermistor: R25℃=100K.

HICTOP 100K ohm NTC 3950 Thermistors/Temp Sensor for Reprap Creality Ender 3 Ender 3 Pro CR-10 10S 3D Printer Pack of 5 1m/39.4inches

• HICTOP 3d printer thermistor can be used on both of the heated bed and the extruder for 3d printers.
• The thermisor is compatible with most 3D printers in the market such as ender3, ender3 pro, ender3 V2, CR-10, hictop d3 hero etc.
• There is a 2 pin female connector on the thermistor for 3D printer.
• Wire length for the thermistor: 1m/39.4 inches.
• Recommended parameters for the thermistor: R25℃=100K B25/50=3950K± 1%.

100PCS Diode SMD SMT LL4148 1N4148

• Product Name : Fast Switching Diode Signal.
• Package Content : 300 xFast Switching Diode Signal.

5-PCS Ender 3 Thermistor HT-NTC100K 3D Printer ntc 3950 100K Thermistor Sensor for Creality Ender 3 v2 Thermistor Upgrade Compatible with E3D V6 Volcano PT100 Ender-3-5 Pro CR10 hotend,

• （Ender 3 Thermistor, Upgrade HT-NTC100K Thermistor (1 meter each)）：Cartridge temperature sensor. Metal head diameter: 3mm, head length: 15mm,cable wire length: 1 meter,connector: XH2.54 2PIN, （Suitable for heating blocks with holes of 3mm*15mm-3mm*20mm）.
• Compatibility：Product recommended operating temperature -50 °C ~ +280 °C, can replace the cartridge K-type thermocouple temperature sensor. Suitable to print multi kinds of filament.Compatible with the heatblocks with 3mm hole,such as: V6 Volcano PT100 type heated block,CR10 plated copper high temperature heating block,etc.
• Stability and Accuracy：Encapsulated in copper case,copper material has better thermal conductivity than stainless steel and improves accuracy.Secured with high temperature adhesive,high stability, no falling off.The internal temperature package to ensure the maximum service life with precision temperature measurement..
• Long Service Life：Compared with other products of the same type that are insulated with ordinary heat shrinkable tubes, this product uses glass fiber with a temperature resistance of 400C degrees for insulation to avoid the possibility of thermal short circuit during high temperature work. Thereby increasing the service life..

mxuteuk 16 Value 220Pcs Diode Assortment Kit Rectifier (1N4001-1N5408 RL207 10A10)/Fast Recovery (UF4007 FR107 FR207)/ Schottky (1N5817 1N5819 1N5822 15SQ045)/Switching Diode 1N4148 MX-9

• ◆Type of product: 16-value 220 Pcs, different current and voltage..
• ◆Package: Rectifier Diode: 20Pcs * 1N4001(1A 50V) 20Pcs * 1N4004(1A 400V) 20 Pcs * 1N4007 (1A 1000V) 10pcs * 1N5404 (3A 400V) 10pcs * 1N5406 (3A 600 V) 10pcs * 1N5408(3A 1000V) 10pcs * RL207(2A 1000V) 5pcs * 10A10(10A 1000V) The Fast Recovery Diode: 10pcs * UF4007 (1A 1000v) 10pcs * FR107(1A 1000) 10pcs * FR207(2A 1000) Schottky Diode: 10pcs * 1N5817 (1A 20v) 20pcs * 1N5819 (1A 40v) 10pcs * 1N5822 (3A 40v) 5pcs * 15SQ045 (15A 45v) Switching Diode: 40pcs * 1N4148 (200ma 100v).
• ◆RoHS compliant electronic components/high temperature welding/low power consumption/high efficiency.
• ◆Widely used in switching circuits, detection circuits, high-frequency and pulse rectification circuits and automatic control circuits of electronic equipment..