Categories

Best Direct Current Electric Hammer

Impact Rotary hammer Drill and Demolition Hammer 1INCH SDS Construction Power Tools - Electric Jack Hammer and Corded SDS Power Drill Function for Chipping Concrete and Tile Removal - Chisel

  • ...00 BPM chipping hammer any conquer any job.
  • This PTS demolition hammer features rock solid design in rugged, well ventilated housing.
  • Our chipping and rotary hammer holds drill attachments up to 26mm in width and features rapid brush change access.
  • When you need and electric jack hammer or concrete drill that will hold up under any conditions, trust only PTS.
  • All PTS demolition tools have undergone hours of development with leading power tool experts.
  • This two in one electric hammer and rotary driver features impact absorbing technology for advanced vibration control.
  • if we wouldn’t use this demo hammer ourselves, we won’t sell it.
  • PTS’ tile removal tool is your new bathroom renovation hero.
  • Beyond ceramic jobs, our 26mm jack hammer concrete breaker can also demolish stone, brick and even tough concrete.
  • Better still, the advanced rubber grip on this SDS hammer drill gives you greater control and precision.
  • This combination electric chisel and impact drill comes with all the attachments needed to master your projec....
Check Stock

CycleOps Hammer Direct Drive Smart Trainer

  • Advanced Direct drive Technology for the top rated bicycle Trainer brand in the world.
  • Innovative electro-magnetic resistance provides instant resistance and maximum watts for your ride.
  • Connects with all virtual Trainer apps and software that are supported through BLE and ANT+.
  • Designed and manufactured in Madison, WI.
  • Lifetime warrantyDescriptionWhile your friends painstakingly negotiate with neighbors and significant others for limited hours of ear-assaulting wheel-mounted indoor trainer time or risk frost bite to round out the required ride time, you'll be dialed in and crushing out watts on your CycleOps Hammer Direct Drive Trainer. The direct drive design saves wheel and tire wear for the road and carries claims of being "quiet enough to ride in a library," which means you can get your intervals in and keep important relationships intact. The secret to the Hammer is a massive, 20-pound flywheel that utilizes electromagnetic resistance to deliver a smooth, realistic riding experience. While no indoor trainer can ever exactly mirror outdoor ride feel, the Hammer is about as close as you can get. It's able to simulate riding grades of up to 20% and is built to handle up to 2,000 watts, which means even the best pro riders won't be able to max the Hamm....
Check Stock

Carejoy Three- Forks Magnetotherapy Pen Point Magnetic Massage Therapy Stick Lymphatic Acid Drainage Pen Fork Massager Beauty Care Anti-Aging Professional Salon Home Use

  • Portable Size: Skin scraping massage machine adopted magnetic charging design, built in 300mAh lithium battery, with 20mins timing, and compact size for easy to carry..
  • Perfect Fitting: Electric facial scraping tool with a perfect radian design to fit face and neck, use with skin care products for face and neck lifting, effectively eliminate edema, and dredge the meridians..
  • Colorful Lights: EMS skin Gua Sha machine with red, green, blue light in a cycle, change a color every 3 seconds, which is suitable for shoulder, elbow, waist, abdomen, knees, feet..
  • 3 Gears: Electric Gua Sha machine with 3 gears can be adjusted, and different people can choose the different gear to relax and activate the meridians and collaterals..
  • Micro Current: Electric Gua Sha massager with EMS micro current, can gently direct to the muscle bottom, deep stimulate the muscle vitality and movement..
Check Stock

Carbon Brushes 999038 for Hitachi Power Tool Motor

  • Carbon motor brushes are one of the most components for power tool. Fit for electric hammer, electric drill, angle grinder, etc..
  • Carbon motor brushes are one of the most components for power tool like electric drill..
  • Worn brushes are often the cause of a poorly running motor.
  • Replacing brushes can fix an intermittent motor..
  • New brushes can restore a motors electric braking Used widely for various of power tools and electric motors, such as rotary hammer drill, circular saw, cut-off saw and angle grinder..
Check Stock

3-in-1 Electric Rotary Hammer Drill | Safety Clutch Corded Variable Speed Sds-plus Concrete/masonry Rotary Hammer Power Drill With Carrying Case | 800w Rotating Speed 12-piece

  • 【EFFICIENT PROTECTION】 Electric hammer dustproof cover can effectively prevent dust diffusion and inhalation to protect your lungs..
  • 【QUALITY UPGRADE】 Upgraded Silicon Rubber material (white rubber) with better tenacity (comparing to other colored rubber)..
  • 【2 SETS VALUE PACK】 2 Sets of dust collector with Double Rubber Ring can meet most of your operation needs on electric hammer, electric pick, percussion drill, hand drill and etc..
  • 【SUITABLE RANGE】 6 - 12 mm 1/4 - 1/2 inch, suitable for electric hammer, electric pick, percussion drill, hand drill and so on..
  • 【EASY INSTALLING & CLEANING】 Install it within a minute and freely flush it in water!.
Check Stock

Monkey King Bar- 110v 1520W Heavy Duty Electric Demolition Jack Hammer Concrete Breaker MKB-65A- Chisel & Point Chisel Bit Hand Gloves w/Case

  • ☑Heavy duty, durable constructed jack hammer electric with 1520W power and 1800r/min impact frequency. Strong core technology meets the most....
  • ☑45 joules (31lbs) of impact energy delivers powerful, maximum performance, 1700 BPM ultra fast demolition ,Damage to hard surfaces in construction,....
  • ☑360 Degrees Handle: This electric jack hammer has 360 degrees swivel front handle for all-round application. Comfortable rubber D-shaped grip rear....
  • ☑Solid insulation protection shell with strong metal components inside. Protective lid with vent for rapid heat dissipation. Sheath at cable root....
  • ☑30MM HEX SHANK:Fits Industrial power hammers using JACK HAMMER 30MM hex shank, also compatible with other brands with Electric jack hammer bit.
Check Stock

Hitachi 49C60 LVDS Cable Ribbon (Main Board to Panel)

  • Carbon motor brushes are one of the most components for power tool. Fit for electric hammer, electric drill, angle grinder, etc..
  • Carbon motor brushes are one of the most components for power tool like electric drill..
  • Worn brushes are often the cause of a poorly running motor.
  • Replacing brushes can fix an intermittent motor..
  • New brushes can restore a motors electric braking Used widely for various of power tools and electric motors, such as rotary hammer drill, circular saw, cut-off saw and angle grinder..
Check Stock

Carolina Tarps Tarp Motor for Dump Truck 1.5hp 50:1 Universal 12V Electric Tarp System Motor

  • 50:1 Gear Ratio, 1.5 HP, 12V Direct Current, 40 Amps, Reversible Action, 44 NM Operating Torque. One of the FASTEST, Strongest Electric Tarp Motors Available..
  • UNIVERSAL FIT for Dump Bodies up to 28 feet. Dump Truck Tarp Motor has a 3/4 inch output shaft and a 5-bolt mounting pattern works with most Electric Tarp Systems..
  • Output shaft is 3/4 inches thick and 3-3/4 inches long with a 5/16" hole drilled at 1 inch and at 2 inches for best fit..
  • INCLUDES reflective chrome housing, all necessary mounting hardware, and 3-Year warranty.
  • 3-YEAR WARRANTY: This electric tarp motor will deliver years of speed, strength, and reliability under normal use. Due to electric motor efficiency and electric power available from your vehicle's battery or alternator, these units are rated for intermittent use. Use for short periods of time only, allowing it to cool between uses. If your motor becomes too hot to touch, stop operation and allow it to cool. Recommended wire is 6 or 8 gauge..
Check Stock

TarpingUSA Apache Series Tarp Motor for Dump Truck 1.5hp 50:1 Universal 12V Electric Tarp System Motor

  • 3-YEAR WARRANTY: This electric tarp motor will deliver years of speed, strength, and reliability under normal use. Due to electric motor efficiency and electric power available from your vehicle's battery or alternator, these units are rated for intermittent use. Use for short periods of time only, allowing it to cool between uses. If your motor becomes too hot to touch, stop operation and allow it to cool. Recommended wire is 6 or 8 gauge..
  • 50:1 GEAR RATIO, 1.5 HP, 12V Direct Current, 40 Amps, Reversible Action, 44 NM Operating Torque. One of the FASTEST, Strongest Electric Tarp Motors Available..
  • UNIVERSAL FIT FOR DUMP BODIES UP TO 28 FEET. Dump Truck Tarp Motor has a 3/4 inch output shaft and a 5-bolt mounting pattern works with most Electric Tarp Systems..
  • INCLUDES REFLECTIVE CHROME MOTOR COVER, all necessary mounting hardware, and 3-Year warranty.
  • OUTPUT SHAFT is 3/4 inches thick and 3-3/4 inches long with a 5/16" hole drilled at 1 inch and at 2 inches for best fit..
Check Stock

Electrode Holder 500 Amp Welding Electrode Holder Set, Heavy Duty Jaw Holding Plier Electrode Clamp for Arc MMA Welder,Black

  • 【High Quality Welding Electrode Holder】The upper and lower clamps of the electrode clamp are made of high copper alloy for maximum conductivity and strength. High quality electrode holder with 500A current capacity, comfortable insulated handle, convenient and easy to operate. Ideal for most arc, MMA, hand welding work.
  • 【Heat-resistant insulation for Safety】The handle is molded from a durable glass-filled nylon material for good heat and impact resistance. Glass-filled nylon handle and clamp insulated for maximum operator protection and safety.
  • 【Groove Jaw Design】The grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions. Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode.
  • 【Welding Chipping Hammer & Wire Scratch Brush】Welding chip hammer is made of high strength and toughness steel. Dual-headed design, one end is flat chisel, the other end is pointed chisel, convenient operation in narrow space.Coil spring handles reduce vibration and improve comfort. The wire brush is made of stainless steel bristles and with wooden handle, they are durable and have a strong cleaning ability..
  • 【Work Great】Which are easy to remove and clean corrosi....
Check Stock

Reboot TIG Welder AC/DC Aluminum Welding Machine with Pulse Foot Pedal 200A Full Digital Control 110/220V High Frequency TIG ARC 2 in 1 Stick Welding Machine

  • AC/DC TIG Welding(pulse)--alternating current (AC) and direct current (DC). Welding of almost all metals, such as steel, stainless steel, aluminum,....
  • 2T/4T (TIG)--determines the control of the operating mode and offers extended control over the current flow. In 2T mode, the high-frequency ignition....
  • TIG Aluminum Welder--10-200AMP AC/DC TIG Electric Current Output.
  • Quality TIG welding on Aluminum, Cast Iron, low hydrogen , Stainless or Steel and....
  • Equipped with a footswitch, welding is more convenient, anytime, anywhere, free welding!（30A breaker suggested for 220V, 50A breaker suggested for....
  • 3 year’s warranty provided,please contact us for any assistance.We will take each and every action to prevent you from bearing any loss at Amazon as....
Check Stock

Variable Electro-Chemical Etching Machine'The Personalizer Plus'

  • Add your custom logo to your knives, guns, tools, and jewelry by etching or oxidizing the metal!.
  • 18 volt transformer, Etch/Mark switches between 120V direct current and 60Hz alternating current, but the knob allows you to control the electric flow, and lights brighten/dim with the change in intensity, allowing for precision etching/marking. Safety fuse installed to prevent blowout from accidental circuit completion..
  • Comes with power box, one cathode applicator, one pack of 15 applicator pads, one bottle of SCE-1 eletrolyte fluid, one bottle of SCE-10 electrolyte fluid, one bottle of AMCE cleaner, one roll of stencil paper, one practice stencil, and instructions. Each item (except box and applicator) also sold separately..
  • Etches and/or marks just about any metal, in only a few seconds!.
Check Stock

COMOWARE Rotary Hammer Drill Bits Set & Chisels- SDS PLUS Concrete Masonry Hole Tool 17pcs with Storage Case

  • PROFESSIONAL AND WIDELY USE: Compared with percussion drills, electric hammer drills can generate stronger impact force lightly, allowing for effective and precise drilling. Before using the hammer drill, you can use a chisel to make a point of strength, and then combine the hammer drill to meet your processing needs..
  • HIGH QUALITY CARBIDE MATERIAL: It is featured in a harder YG8 Carbide tip and carbide steel body. The robust head is ideal for high impact applications. It allows for precise starts in materials such as reinforced concrete..
  • UNIVERSAL CONNECTION DESIGH: The SDS – PLUS shank is suitable for most rotary hammer drills on the market and meets most of your needs. SDS chisel matches the electric hammer drill to punch hole for concrete, brick and wall, cut and chisel groove..
  • MULTIFUNCTIONAL USING: The bit set includes 13pcs drill bits with 3/16″, 1/4″, 5/16″, 3/8″, 1/2″, 9/16″, 5/8″, 1 Point Chisel, 2 Flat Chisel and 1 U-groove Chisel..
  • CONVENIENT ORGANIZATION AND STORAGE: Come with a plastic index case, convenient to use and carry..
Check Stock