Categories

Best Direction Coupler

4000 Psi Pressure Rotating Turbo Nozzle 4.0 Gpm Quick Connector with 4500 Psi Pivoting Coupler with 7 Pieces Spray Nozzle Tips Kit Multiple Degrees (0, 15, 25, 40, 65 Degrees, Rinse1, Soap2)

  • ...ssure washer wand: pressure washer rotating turbo nozzle is 4.0 orifice, 4.0 GPM with a 1/4 inch quick connector plug for pressure washers up to 4000 PSI, which can fit most high pressure washer wands.
  • The rotation range of the pivoting coupler is 180 degree and it can rotate 45 degree, 90 degree, 120 degree at one direction.
  • Quality material: made of ceramic core and rubber exterior and brass, the quick connector turbo nozzle is rustproof and anti-aging.
  • The spray nozzle tips are made of stainless steel, which can be applied for a long time.
  • Pivot coupler is made of brass and stainless steel.
  • 7 Spray patterns: comes with 7 pieces spray nozzle tips in different spray patterns, the red one is 0 degree, yellow one is 15 degree, green one is 25 degree, white one is 40 degree, black one is 65 degree, pink one is soap mode, and blue one is rinse mode.
  • Wide applications: 4.0 GPM quick connector turbo nozzle is suitable for concrete, blocks, bricks, paving stones and most outdoor surfaces, which can wash the car, the car edge, the house and the drain, water the flower, practical fittings for cold water pressure cleaner.
  • The pivoting coupler is 1/4 inch quick disconnect, fits most brands of pressure washer wands and nozzles, up to 4500 PSI.
Check Stock

Air Conditioner Exhaust Vent Hose - 5 Inch Diameter, 80' Length, Universal Counter-Clockwise Thread Air Vent Compatible with Honeywell, Whynter, Frigidaire, LG, Delonghi Toshiba, Delonghi, JHS

  • [Perfect Replacement for Portable AC] - If your air conditioning hose is damaged or you need to cool more space. This is a good replacement to keep your air conditioner from leaking when the essential vent hose has cracked..
  • [Longer & More Flexible Than Original ] - Our AC exhaust vent is long enough to extend up to 80 inches, reach the window and still allow movement of the air conditioner. So it will cool more space, such as dining room and kitchen..
  • [Best Quality, Durable & Sturdy] - Angooni AC Hose is made of strong, flexible polypropylene which makes it long lasting, withstanding any wear and tear without leaking. Great for LG, Honeywell, Whynter, Frigidaire, Toshiba, Delonghi, JHS, SPT, Haier, Midea and many more..
  • [Installs in Less Than 5 Minutes]- Fully expand the end of the hose, align with the coupler, and rotate the coupler counter-clockwise to twist onto the hose. Repeat on the other end of the hose to attach to the second coupler. It’s that simple..
  • [Please Check Before You Buy] - 1. Make sure your original hose diameter is 5 inches from outer edge to outer edge. 2. Make sure your original hose has a counter-clockwise threading direction. If you have any problems about your purchase, please don't hesitate to contact us..
Check Stock

Air Conditioner Exhaust Vent Hose - 80' Length, Angooni Universal Counter-Clockwise Thread Air Vent Compatible with Honeywell, Whynter, Frigidaire, LG, Delonghi Toshiba, Delonghi, JHS (5.9' Diameter)

  • [Perfect Replacement for Portable AC] - If your air conditioning hose is damaged or you need to cool more space. This is a good replacement to keep your air conditioner from leaking when the essential vent hose has cracked..
  • [Longer & More Flexible Than Original ] - Our AC exhaust vent is long enough to extend up to 80 inches, reach the window and still allow movement of the air conditioner. So it will cool more space, such as dining room and kitchen..
  • [Best Quality, Durable & Sturdy] - Angooni AC Hose is made of strong, flexible polypropylene which makes it long lasting, withstanding any wear and tear without leaking. Great for LG, Honeywell, Whynter, Frigidaire, Toshiba, Delonghi, JHS, SPT, Haier, Midea and many more..
  • [Installs in Less Than 5 Minutes]- Fully expand the end of the hose, align with the coupler, and rotate the coupler counter-clockwise to twist onto the hose. Repeat on the other end of the hose to attach to the second coupler. It’s that simple..
  • [Please Check Before You Buy] - 1. Make sure your original hose diameter is 5.9 inches from outer edge to outer edge. 2. Make sure your original hose has a counter-clockwise threading direction. If you have any problems about your purchase, please don't hesitate to contact us..
Check Stock

Portable Air Conditioner Hose 5 Inch Diameter, AC Hose Exhaust Vent With Anti-Clockwise Thread Length up to 80 Inches

  • 5 Inches Anti Clockwise: This AC hose exhaust vent is 5 inches diameter and anti-clockwise thread direction, please check to make sure it will suit for your AC unit before purchase..
  • Up to 80 Inches Length: Our ac hose is expandable and it will be expeand to 80 inches to offer the length you need through wall or window and also can be shorten to 15 icnhes for easy storage..
  • Long Lasting Design: The exhaust ac hose is made of high quality polypropylene, combine with a steel ring inside,which made it flexible and heat wear resistance even you using for years without laeking..
  • Easy Instalation and Extention: You just need to rotate anti-clockwise the hose to your ac coupler and then fix the coupler to your ac unit..
  • What you get: 1 Year warranty for the ac hose and our friendly customer service..
Check Stock

Foozet Air Conditioner Hose, Exhaust Vent with 5.9' Diameter, Anti-Clockwise Thread & Length up to 80', Compatible with Many Portable Air Conditioner

  • ANTI CLOCKWISE : our air conditioner hose with anti-clockwise thread direction,the diameter of our AC hose is 5.9 inches,fit many poratable air conditioner.you can make sure before purchasing that you check your AC instructions..
  • Long Lasting: the exhaust ac hose is made of high quality polypropylene.
  • Flexible, Durable, Trustful: the air conditioner hose shortened length of the hose is 15 inches. You can extend the hose up to 80 inches..
  • Quick Installation: this portable air conditioner universal exhaust hose easy to install,make sure your original hose’s diameter is 5.9 inches, gently pull the end of the hose, align one end with the connector, and then rotate the coupler counter-clockwise to twist onto the hose. snap the coupler onto your air conditioner..
  • What you get: 1 Year warranty for the ac hose and our customer service..
Check Stock

Estoder Portable Air Conditioner Window Vent Kit with 5.9" Exhaust Hose (Length Up To 79”), Universal Portable AC Duct Kit with Coupler, Adjustable Window Seal for Sliding Vertical & Horizontal Window

  • [5.9” Exhaust Hose & 79Inch Length]: Our portable ac window kit fits most air conditioners with a diameter of 5.9 inches hose in a counterclockwise thread direction. The air conditioner window kit comes with a vent hose up to 79Inches long (longer than the other 59 inches kits), which is more cost-effective, and gives your mobile air conditioner more room to move..
  • [Adjustable Seal Plates & Good Sealing]: The ac window seal kits has an adjustable length range from 16.93” to 64” that is universal for most horizontal & vertical sliding windows and doors. Includes a sealing brush strip attach to the gap between the window and seal panel for enhanced seal and energy efficiency. Please check if this is the right size for your window before purchasing..
  • [Get A Full Set At Once]: Our AC window vent kit includes 4* Seal Plate (Adjustable length from 16.93" to 64"), 1* Exhaust Hose (79" length, 5.9" diameter), 1* Hose Coupler/Adaptor, 1* Filter, 1* 10ft Sealing Tape and 4* Screws, you can get a full set of accessories at once. All accessories are easy to install or remove, No more extra tools needed. Stored space-saving when not in use..
Check Stock

tinker3d 5 inch Portable Air Conditioner AC A/C Exhaust Vent Hose Tube Coupler Coupling Extender Extension - Counter-CLOCKWISE

  • Screw hose LEFT into the coupler. Fits COUNTER-CLOCKWISE threaded exhaust hose..
  • PLEASE MEASURE YOUR EXHAUST HOSE: Fits 5 inch standard threaded exhaust hose.
  • Designed for exhaust hoses similar to Amazon ASIN B074DGDCTD.
  • PLEASE DETERMINE CORRECT THREAD DIRECTION BEFORE PURCHASING.
Check Stock

Wilton Cake Lifter

  • Revolving Cake Turntable: Turns smoothly in clockwise or anticlockwise direction, allows you easily create beautiful borders when decorating cakes. (Note: The decorating tips, bags and scraper are at the bottom of the cake turntable when you open the package).
  • Numbered Cake Decorating Tips: 12 decorating tips with coupler help you create beautiful patterns. With open star, closed star, french, round, leaf, rose tips, grass tips..
  • Reusable / Disposable Pastry Bags: 2 pack 12 inches Silicone piping bags which can withstand powerful extrusion and reuse. Disposable bag for no messy cleaning after finished icing, clear bags are ideal for instant icing color identification..
  • Flexible Icing Spatula: Ideal for frosting / icing cakes cupcakes, perfect for making layered cakes and spreading on a crumb layer evenly and smoothly..
  • Various Icing Smoother: 3 Decorating comb and icing smoother are perfect to create no less than 3 kinds of patterns on the side or top of cakes..
Check Stock

bROK Products 32973 Coupler 2\ Ball, 3\ Channel - 3500 lb.

  • PRECISE FIT. This trailer coupler is designed to mount onto a 3-inch wide trailer tongue beam and couple to any standard 2-inch diameter trailer ball.
  • EASILY ADJUSTABLE. Equipped with a posi-lock spring and adjustable nut on the inside, this trailer hitch coupler can easily be adjusted to ensure a snug fit on the trailer ball.
  • SECURE COUPLING. The posi-lock latch mechanism of this trailer tongue coupler accepts a safety pin or coupler lock for enhanced security.
  • HIGH-STRENGTH. Constructed from punched, die-cut steel, this trailer ball coupler is rated as a class 2 trailer coupler and has a capacity of 3,500 lbs. gross trailer weight and 500 lbs. tongue weight.
  • CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this straight tongue trailer coupler is finished in a durable zinc plating and makes a great boat trailer coupler.
Check Stock

CURT 25217 Black A-Frame Trailer Coupler, 2-Inch Hitch Ball, 7,000 lbs

  • PRECISE FIT. This trailer coupler is designed to mount onto an A-frame trailer tongue and couple to any standard 2-5/16-inch diameter trailer ball.
  • EASY OPERATION. Equipped with an easy-lock latch mechanism, this trailer hitch coupler is quick and simple to operate and offers a snug fit on the trailer ball.
  • SECURE COUPLING. The easy-lock latch mechanism of this trailer tongue coupler accepts a safety pin or coupler lock for enhanced security.
  • HIGH-STRENGTH. Constructed from punched, die-cut steel, this trailer ball coupler is rated as a class 4 trailer coupler and has a capacity of 10,000 lbs. gross trailer weight and 1,500 lbs. tongue weight.
  • CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this A-frame tongue trailer coupler is finished in a durable black powder coat and makes a great boat trailer coupler.
Check Stock

CURT 25100 Straight Tongue Trailer Coupler for 3-Inch Channel, 2-In Hitch Ball, 5,000 lbs

  • PRECISE FIT. This trailer coupler is designed to mount onto a 3-inch wide trailer tongue beam and couple to any standard 2-inch diameter trailer ball.
  • EASILY ADJUSTABLE. Equipped with a posi-lock spring and adjustable nut on the inside, this trailer hitch coupler can easily be adjusted to ensure a snug fit on the trailer ball.
  • SECURE COUPLING. The posi-lock latch mechanism of this trailer tongue coupler accepts a safety pin or coupler lock for enhanced security.
  • HIGH-STRENGTH. Constructed from punched, die-cut steel, this trailer ball coupler is rated as a class 3 trailer coupler and has a capacity of 5,000 lbs. gross trailer weight and 700 lbs. tongue weight.
  • CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this straight tongue trailer coupler is finished in a durable zinc plating and makes a great boat trailer coupler.
Check Stock

EZ Snap Covers 9 Foot Long Standard Height 7 1/2″ Baseboard Heater Cover Kit with 2 Closed End Caps

  • EZ Snap Covers are 20 gauge galvanized steel with white epoxy powder coating. They are guaranteed never to rust and are 18% thicker steel than all comparable baseboard heater covers. End caps are 18 gauge thickness..
  • Our covers fit 95% of all existing hot water baseboard radiator heaters. Installation takes five minutes, requires no power tools, and saves you on pricey contractor bills..
  • Lengths over 8’ include a coupler to join the panels together. 8’ will be 2 4’ covers and a coupler, 9’ is 1 4’ and 1 5’ cover and a coupler.
  • 10’ is 2 5’ covers and a coupler, 11’ is 1 5’ and 1 6’ and a coupler.
  • 13’ is 1 6’ and 1 7’ and a coupler.
  • EZ Snap Covers have a lifetime warranty against rust. If they rust, send them back and we will replace them..
Check Stock

CURT 25128 Straight Tongue Trailer Coupler for 2-Inch Channel 1-7/8-In Hitch Ball 2,000 lbs

  • PRECISE FIT. This trailer coupler is designed to mount onto a 2-inch wide trailer tongue beam and couple to any standard 1-7/8-inch diameter trailer ball.
  • EASILY ADJUSTABLE. Equipped with a posi-lock spring and adjustable nut on the inside, this trailer hitch coupler can easily be adjusted to ensure a snug fit on the trailer ball.
  • SECURE COUPLING. The posi-lock latch mechanism of this trailer tongue coupler accepts a safety pin or coupler lock for enhanced security.
  • HIGH-STRENGTH. Constructed from punched, die-cut steel, this trailer ball coupler is rated as a class 1 trailer coupler and has a capacity of 2,000 lbs. gross trailer weight and 200 lbs. tongue weight.
  • CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this straight tongue trailer coupler is finished in a durable zinc plating and makes a great boat trailer coupler.
Check Stock