Categories

Best Directional Control Valve Motor

RuggedMade 25 GPM Hydraulic Log Splitter Directional Control Valve, Auto Return Detent Lever Handle, 2750 PSI (1/2\ Work Ports)

  • SPECIFICATIONS: This 2 spool valve from Chief’s G Series is a directional control valve with a joystick, 2 spool spring to neutral tandem center, 10 GPM flow rate, SAE 8 work, and SAE 10 inlet/outlet ports. Its maximum working pressure is 3625 PSI..
  • HIGH UTILITY: Our hydraulic valve 2 spool has wide-ranging utility since it can be effortlessly shifted in 3 different positions, providing increased directional control of the actuators. The 3 pos setup also reduces heat buildup..
  • CONSISTENT: The log splitter valve has a spring to neutral tandem center and is therefore consistent, making it a great support for fixed-volume pumps. It is not only economical but also low maintenance..
  • MADE TO LAST: With an alloy steel body, this directional control 4-way valve is highly corrosion resistant and withstands even melting temperatures. It is extremely ductile and can outlast other similar products available in the market..
  • EASE OF USE: With a joystick control in tow, our hydraulic joystick valve offers a single push-pull and up-down control on all valves. It cuts down the force feedback from the system to the operator..
Check Stock

Chief Directional Control Valves 1 Spool 4 Way 4 Position - Hydraulic Directional Control Valve with Spring Center - 25 GPM, 1/2\ NPT Work Port, 3/4\ NPT Outlet Port, 3000 PSI, 16 lb, 220572

  • SPECIFICATIONS: The Chief P40 manual Directional Control Valve for hydraulic systems has a 4 way, 3 pos tandem center with 10 GPM, maximum working pressure of 3625 PSI, temperature of 176°F, standard SAE 8/10 inlet/outlet ports. It weighs 9.4 lb..
  • FAST ACTING: Our 4 way hydraulic control valve has 4 ports that facilitate super fast extension and retraction of double-acting hydraulic cylinders, producing sufficient pressure required in a wide range of applications..
  • PRECISE: This directional control valve hydraulic has a two spool construction equipped with lands and undercuts. The precision machined construction allows the spools to open and close fluid flow paths effortlessly with high accuracy every time..
  • EFFICIENT: Our 3 pos, hydraulic directional control valve allows the hydraulic fluid back into the tank without forcing it over the relief valve, reducing heat generation and a buildup of backup pressure..
  • MULTIPURPOSE: The P40 hydraulic valves are extremely versatile and can perform several functions in their central position - they can easily unload hydraulic pumps, stop, allow, or change the direction of fluid flow in hydraulic circuits. Power beyond and closed center plugs may be added and are sold separately..
Check Stock

Chief G Series P80 Hydraulic Directional Control Valves - Hydraulic Speed Control Valve - 3 Spool, 21 GPM, 4 Way 3 Pos Spring Center, SAE 10 Inlet and Work Ports, SAE 12 Outlet Ports, 3625 PSI

  • Durable - The hydraulic directional control valve is a cast-iron structure, which can be used for a long time.
  • 5 Spool Hydraulic Valve - The hydraulic valve can manage and guide the flow of hydraulic oil between hydraulic pumps and hydraulic cylinders, motors, tanks, and more.
  • Double Acting - This control valve comes with 5 spools and SAE O-ring in/out ports. All spools are standard double-acting spools, which are very suitable for double-acting cylinders.
  • High Efficiency - The relief valve range is up to 3600 PSI and the maximum flow is up to 13 GPM.
  • Widely Used - The hydraulic directional control valve is very suitable for small tractors, tractor loaders, fellers, forklift environmental vehicles, light loaders, log splitters, and more.
Check Stock

Xilin Electric Powered Pallet Jack 3300lbs Capacity Mini Type Walkie Pallet Truck 48 x27 Fork Size

  • Electric powered walkie pallet truck. Load capacity: 4400lbs..
  • 48”x27” Fork size, Small turning radius and low profile chassis..
  • Advanced AC control system eliminates the motor brushes and directional contractors..
  • Emergency power disconnect. | Low speed switch in the handle..
  • Built-in pressure relief valve protects the trucks from overloading..
Check Stock

CROSS Manufacturing SBAF2J 143430 SBA Series Cast Iron Double Spool Monoblock Hydraulic Directional Control Valve with joystick, 1st Spool 4-Position Float, 2nd Spool 3-Position, Open Centered, 3/4\ x 3/4\ x 1/2\ NPT Female, 2500 psi, Grey

  • Durable - The hydraulic directional control valve is a cast-iron structure, which can be used for a long time.
  • 2 Spools Hydraulic Valve - The hydraulic valve can manage and guide the flow of hydraulic oil between hydraulic pumps and hydraulic cylinders, motors, tanks, and more.
  • Double Acting - This control valve comes with 2 spools and #8 SAE O-ring in/out ports. All spools are standard double-acting spools, which are very suitable for double-acting cylinders.
  • Widely Used - The hydraulic directional control valve is very suitable for small tractors, tractor loaders, fellers, forklift environmental vehicles, light loaders, and more.
  • Max Pressure: 3600 PSI, Inlet Port: SAE 10, Outlet Port: SAE 12, Working Ports: SAE 10, Fluid Temperature: 5 to 176℉, Valve Type: 4 way 3 positions, Mounting: 3 bolts m8 needed.
Check Stock

SPELAB Electric Exhaust Cutout Valve 3.0 Inch 76mm Catback Single Y Pipe with One Controller Remote Kit…

  • ...ehicles. Note: please make sure you have enough space to install before purchase and make sure your exhaust size is 3.0 inch. Professional Installation is highly recommended. 3.0” Cut-out valve Kit included: 1 x 3.0” exhaust pipe cutout valve with motor, 1 x extension harness (Length: 3.5M), 1 x wireless remote control (without battery), and 1 x control box with cigarette lighter plug..
  • Function: This Cut Out Valve System Kit is specifically designed for single exhaust pipe and made to enhance the performance and power of your vehicle by remotely controlling of cutout valve. The faster the exhaust could be pushed out of the engine, the faster the combustion process could start over which give more horsepower. Aggressive deep sound while ensures smooth exhaust gas flow. SPELAB Butt Joint Exhaust Band Clamp is recommended for installation..
  • Cutout Valve: High-quality chrome-plated steel butterfly plate and valve pipe wall thickening process. You can turn on and off from the inside of the car by remote control. Turn off the switch, keep your original, peaceful exhaust system for comfortable. Turn on the switch, you can get aggressive deep sound. The opening angle of the cutout valve can be freely controlled..
  • Working Environment: Working Voltage: 12V. ....
Check Stock

Kazeffi Synchron Motor 24V 4RPM Replacement for Honeywell Motor 802360JA，Used in V8043/8044 Zone Valve Control

  • 【Higher Performance】:802360JA Zone Valve motor Adapt to Honeywell zone valve motor V8043/V8044 . This Zone Valve Motor 24V, 4rpm at 50/60HZ. Cable....
  • 【Save time and money】:This Replacement motor for v8043 zone valves motor Easy to install. No need to replace brand new actuators or other HVAC....
  • 【High Quality】:Quality tested for over 100K cycles for flawless operation,Metal gears can be perfectly compatible with Honeywell V8043 or V8044....
  • 【More Applicable Scenarios】:802360JA can be replaced: HVAC damper control motor, Actuator Zone Valve motor etc. After many professional debugging,....
  • 【After-sale service】:100% after-sale guarantee, if you have any dissatisfaction with the product, you can ask for a replacement or a full refund.....
Check Stock

APDTY 140175 HVAC Heater Hose & Control Valve Unit

  • Brand New Premium Quality Heater Control Valve With Heater Hoses.
  • Restores Heater Funciton By Replacing The Heater Control Valve Motor.
  • 2004 Models Must Be Retrofitted From The Old Motor Design.
Check Stock

Makita GD0800C 1/4\ SJS™ Die Grinder, Teal

  • Powerful 6. 6 AMP motor delivers 7, 000-28, 000 RPM for faster material removal.
  • SJS technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop.
  • Variable speed control dial enables user to match the speed to the application.
  • Constant speed control automatically applies additional power to the motor to maintain speed under load.
  • Soft start suppresses start-up reaction for smooth start-ups and longer gear life.
  • Electronic current limiter helps protect the motor from overload.
  • Directional air-flow vents channel the tool's air output away from the user's face.
  • Labyrinth construction prevents debris from penetrating the motor, bearings and gears for longer tool life.
  • Zig-zag varnish protects the armature coil from dust and debris for longer motor life.
Check Stock

eMylo Smart RF Motor Controller Switch Relay Wireless Remote Control Switch 12V Motor Switch 433Mhz for Rolling Door, Electric Curtains/Locks, Water Pump, DC 5V-24V with 2 Transmitters （1 Pack）

  • ★ Motor wireless remote control switch: It is specially designed for motor. Two-channel design capable can control the forward, reverse and stop of the motor, and with long control distance..
  • ★ Technology Upgrade: the transmitters and receivers adopt non-directional wireless encoding technology, allowing independent control, without mutual interference, High-performance "TUYA "chip module, which stable performance, sensitivity..
  • ★ Easy Installation: Using the Special jointing clamp to connect the motor and wireless relay in one minute. No need any tools. Avoid opening the box during installation and ensure firm connection and safe operation..
  • ★ Stability & Safty: The relay module is with signal sensitivity and resist interference. RF motor controller can pass through walls, floors and doors to control receiver within the valid range. Made of the ABS material and flame retardant material, overvoltage protection and fire protection, safer..
  • ★ Widely Application: Structural upgrading eMylo motor driver reversing controller switch allowing independent control without mutual interference. Commonly used in rolling doors, electric curtains, electric door locks ,water pump and other motor machines. Start your smart life now..
Check Stock

SIEMENS 6ES7 214-1AG40-0xB0 SIMATIC S7-1200 CPU 1214C, Compact CPU

  • Programmable Control -- This module is programmable control, can achieve thousands of functions, stable and reliable working performance, built-in watchdog timer circuit, to ensure that the module for a long time to run Input high speed pulse C235, C251 and FX1N compatible.Output relay 1A output, Rated current 5A, can directly drive DC solenoid valve, AC solenoid valve, AC contactor, AC motor, etc..
  • Built-in Analog Input and Output -- Built-in Analog input AD, corresponding to internal data register D5030.(Not D8030) Built-in Analog output DA, corresponding to internal data register D5101..
  • The PLC with Two Programming Port -- The TTL interface and the 232 interface. The 232 interface, you can directly use the USB-232 serial port with a computer to download the program directly. When the PLC need to connect with the touch screen or text, can be used to conne....
Check Stock

Hydraulic Joystick Directional Control Monoblock Valve for Tractor Loader 2 Spool 11 GPM with Joystick

  • Max operating pressure: P = 3600psi (250 bar).
  • 2 spool hydraulic directional control valve. Release valve adjustable..
  • Durable cast iron construction provides long-term usage.
  • Compact design use in small tractors, tractors loaders, log splitters, etc..
Check Stock

RIKON Professional Power Tools Benchtop X/Y Mortiser, 34-260

  • BENCHTOP MORTISER - This benchtop X-Y Mortising Machine gives precision positioning of your work for boring mortises because of the sliding X-Y axis table..
  • POWERFUL - With powerful ½ HP Motor with 1750 RPM this motor quickly cuts mortises in the toughest woods without stalling..
  • CONSISTENT CUT - Use this benchtop mortiser with dovetail column ways with adjustable stop for solid, consistent cutting of multiple mortises..
  • STABILIZED - Feel safe with your consistent work because this benchtop has a gas filled stabilizer that helps control downward and upward chisel motion during your hard work..
  • CONTROL - The X - Y directional table with stops provides ultimate positioning control for boring mortises and allows you to focus on the work. For ultimate control use this Rikon benchtop mortiser for all of your needs..
Check Stock