Categories

Best Disc Brake Assembly

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

  • This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
  • FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
  • Press bearings and races into an open hub wheel assembly on most European and American cars.
  • Some tools in the kit are disk brake specific, such as the caliper piston retractor.
  • If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
  • BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
  • The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
  • Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
  • EASY STORAGE: No longer will you need to worry about your brake caliper piston tool getting mismatched and lost in a drawer.
  • Caliper piston compressor tool packaged in a heavy-duty 14.5” x 2.5” x 11” inch (36.8cm x 6.4cm x 27.9cm) plastic blow-molded carr....
Check Stock

Dirt Bikes and Street Vendors

  • 5-Speed Manual Transmission: Heavy-duty clutch offers smooth, progressive engagement and smooth-shifting. Take fully controlyour bike, Pros best choice!.
  • Kick Start/ Electric Start, Electric start for easy starting well the kick startbeing useda backplanany unexpected situations..
  • Front and Rear Hydraulic Disc brakes allows the bikecomea faster stop than other brake systemsmakingmore safeuse.any rider would tell you, powernothing without good brakes. The high performance Hydraulic disc brake makes this bikeexperts choice..
  • Some assembly required: Assembly for dirt bikes include Handle bar brackets, wheels, brakes, number plate and fender. (May differ per model).
Check Stock

Air Powered Brake Piston Wind Back Tool Pneumatic Brake Caliper Compression Tool Brake Caliper Piston Compressor Rewind Tool Brake Pump Adjusting Tool for Auto Repair

  • ...tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads..
  • Ratcheting Action: Brake piston compression tool provides 360 degree swing.
  • center located ratchet screw creates an even force when compressing the piston to ensure proper alignment and prevent damage to your brake assembly.
  • reverse movement by flipping the switch on the handle tool to retract the compression plate..
  • Easy Reset: Drain the fluids from calipers then remove the caliper and worn brake pads from your rotor assembly.
  • Retract brake caliper press plates to fit inside the caliper cavity.
  • Begin ratcheting slowly and steadily until the pistons have retracted completely.
  • Retract compression plates to remove the disc brake piston tool from the caliper cavity..
Check Stock

hosote 26 Inch Mountain Bike with Aluminum Frame for Men and Women Shimano 21 Speeds Lightweight MTB Bicycle with Suspension Fork Dual Disc Brake Multiple Colors

  • 【Durable Aluminum Frame】The hosote mountain bike features no-rust light aluminum mountain frame, lighter than steel. That makes this bike easier....
  • 【Shimano Drivetrain】SHIMANO Shifter and Derailleur with 21 Speeds, a wide range of gears gives you more control for climbing,for room to get low....
  • 【Suspension Fork】Good performance suspension fork soak up bumps and thumps great for rugged trails and casual rides, to provide you with a fun,....
  • 【Double Disc Brake】The brake system consists of double disc brake, giving you the stable and strong braking force and help you stop confidently in....
  • 【Assembly Guide】Assembly tutorial video located beside the images.
  • 85% pre-assembled,easy to assemble, assembly tools included.If you have any....
Check Stock

VGEBY1 Disc Brake Adapter A-F203 Bicycle Disc Brake Mounting Bracket Mount Caliper Adaptor for MTB Mountain Bike Black

  • TOP QUALITY: Disc brake adapter is made of high quality aluminium alloy material, which is anti-corrosion and not easy to deform..
  • DURABLE TO USE: With low profile design, lightweight and durable for long term use, much saving money..
  • DESIGNED FOR: Suitable for A disc brake seat, mounted on the front fork with 203mm(8") brake disc..
  • WELL EQUIPPED: Comes with screws for assembly, so it is easy to install, a good replacement parts for bike..
  • GUARANTEE: If you are not satisfied with our product received, you can apply for unconditional return and refund within 180 days. In terms of any....
Check Stock

Niome Black 90/100 14\ Rear Wheel Tire and Rim Inner Tube with 12mm Bearing Assembly Fit For 110-125cc Dirt Pit Bikes

  • This is the 14" front dirt bike wheel assembly commonly used on many 50cc, 70cc, & 90cc dirt bikes..
  • The assembly comes complete with the front rim, 2.50-14 knobby tire, inner tube, wheel bearings and brake disc rotor..
  • Please note: Tire sizes vary by ride, please check your current tire and wheel sizes before placing the order..
  • Package include: 1 x Tire + 1 x Rim + 1 x Inner tube + 1 x Brake disc rotor.
Check Stock

ABN Ratcheting Caliper Piston Tool – 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool

  • ... and to prevent damage to your brake components.
  • Reverse tool movement to retract compression plates by flipping the switch on the handle.
  • EASILY RESET YOUR BRAKE CALIPERS AND PISTONS: Drain fluid from calipers using approved brake pressure relief procedure then remove the caliper and worn brake pads from your rotor assembly.
  • Retract brake caliper press plates to fit inside the caliper cavity.
  • Begin ratcheting slowly and steadily until the pistons have retracted completely.
  • Retract compression plates to remove the disc brake piston tool from the caliper cavity.
  • BUILT TO LAST: Constructed of carbon steel, the ratcheting screw and pad plates are designed for maximum strength and durability.
  • Thick 7.8-inch (19.8 cm) steel handle features plastic shell for comfort and efficiency.
  • Brake piston spreader set includes (2) 4-5/8 by 2-3/8 inch (10.2 by 5.1 cm) plates and (2) 7 by 2-3/8 inch (17.8 by 5.1 cm) rotating plates.
  • Larger plates are held in place with built-in magnets for easy attachment and removal.
Check Stock

Lucas Oil 10027-Pk1 Red 'N' Tacky Grease 35 Lb

  • Sil-Glyde Brake Lubricant is recommended for the entire brake assembly, compatible with plastic and rubber (EPDM & Nitrile).
  • Provides a noise-free brake installation and easy disassembly.
  • Eliminates disc brake squeal and protecting parts from corrosion and rust, and dampens vibrations between contact points.
  • Moisture-proof and heat resistant to over 425°F (218°C).
  • Silicone-based brake lubricant - 1, 4 oz Tube.
Check Stock

Rear Axle Assembly Go Kart Rear Wheel Axle Shaft Assembly Complete Wheel Hub Kit for DIY Go Kart ATV Quad Buggy Mini Bike (29'' Axle Overall Length)

  • 【REAR AXLE KIT】This is a high class and durable live axle kit, perfect for DIY go kart projects or rebuilds..
  • 【HIGH QUALITY MATERIALS】This Go Kart Rear Axle Assembly Kit is a high-performance aluminum cylinder with brake fluid pre-installed. The brake disc is made of high-quality steel, which is durable and has a long service life..
  • 【MAIN PARAMETERS】Axle Overall length (from end to end): 29'', Disc: 6.3'' x 0.16'', Brake Disc Diameter: 6.3'', Sprocket: T8F 58T, Package size: 30'' x 8'' x 3'', Shipping weight: 10 lbs..
  • 【WIDE APPLICATION】Complete Rear Axle Kit, brake master cylinder caliper components are highly adaptable, fit for Quad ATV Buggy Go Kart, fit for many 50CC 70CC 90CC ATV Quads, Go Karts, such as Atomik, Motowork, DHZ, LEI, etc..
Check Stock

DNA MOTORING TOOLS-00243 24-pcs Disc Brake Caliper Piston Compressor Wind Back Repair Tool Kit for Cars, with Carrying Case,Red

  • ...n easily store in one hard storage case with handles that is easy to carry and compact for convenient storage. A Essential tool kit for any garage, DIY or professional automobile maintenance..
  • PACKAGE INCLUDES - [18] Adapters for popular car brands.
Check Stock

CNC Mountain Bike V Brake Set, Bicycle V Brake for Front/Rear，1Pair

  • 【Braking System】：Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way hydraulic brakes for mountain bike system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or sc....
Check Stock

Merrell mens MOAB 2 WTPF Hiking Shoe, Granite, 10 US

  • 19" front wheel assembly for pit pro trail dirt bike.
  • 45mm top clamp and fork, 48mm bottom clamp and fork, fit 7/8'' 22mm handle bar.
  • The assembly comes complete with the front 1.6 x 19 rim, 70/100-19 knobby tire, inner tube, wheel bearings.
  • Please note: Tire sizes vary by ride, please check your current tire and wheel sizes before placing the order.
  • Package include: 1 x Tire + 1 x Rim + 1 x Inner tube + 1 x Brake Disc + 1 x Brake Master Caliper + 1 x Rim Axle + 2 x Front Fork Assembly + 1 x Triple Clamp Handlebar Riser set.
Check Stock

PETCHOR HB-100 Line Pulling Hydraulic Disc Brake Calipers Mechanical Disc Brakes for MTB Mountain Bike E-bike and Electric Bike 2PCS Front/Rear Gold

  • 【Braking System】：Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way hydraulic brakes for mountain bike system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or sc....
Check Stock