Best Disc Brake Measuring Gauge

QuickCar Racing Products 61-103 Mini Brake Bias Gauge Panel

  • Disc and drum brakes - useable with both disc and drum style brake pads on any type of vehicle from passenger cars and trucks to heavy duty transportation.
  • Color-coded - color powder-coated blades help to quickly determine the brake pad status when examining brake lining.
  • Durable steel - the durable 20-gauge steel blades won't easily bend or break like plastic.
  • Stamped callouts - each blade has both metric and SAE measurements stamped into the metal.
  • Blade sizes - yellow blade tip measures 4/32 (0.1250)-inch (3.18mm) and the red blade tip measures 2/32 (0.06259)-inch (1.59mm).
Check Stock

Camber Gauge Digital Wheel Alignment Tool -90° to +90° Wide Range Wheel Alignment & Balancing Tools Accurate Caster Camber Gauge with Digital Display & Powerful Magnet & Positioning Bubble & Reset Key

  • ...ange Measurement】Wheel alignment & balancing tool is equipped with a clear digital display,allowing you to quickly read the caster and camber angles.You can check and adjust the castor and camber angles at a glance.This camber gauge also has a backlight for use in dark areas.The camber gauge has an ultra-wide measuring angle range from -90 to +90 degrees.It is suitable for wheel alignment of all vehicles,such as cars, motorcycles, trucks, vans, etc..
  • 【Powerful Magnet&Positioning Bubble Design for Accurate Measurement】There is a magnet with strong magnetic attraction at the bottom of the camber gauge,which can be easily attached to various magnetic surfaces.The magnet attached area of the camber gauge is smaller than that of the products on the market,which can ensure higher accuracy,but the suction is still stable.When attaching the camber gauge to the brake disc,adjusting the positioning bubble to the center can make the test more accurate..
  • 【“Zero” Reset Key & Data Record of Wheel Alignment & Balancing Tools】The digital camber gauge is designed with a reset button. Press the "ZERO" key to reset. And then you can adjust the eccentric bolt to make the camber alignment tool reach to the expected value. After r....
Check Stock

KAKO Adjustable Magnetic Gauge Tool,Camber Castor Strut Wheel Alignment Tool for Car/Truck Camber/Castor Strut Wheel Alignment and Tire Repair

  • Accurate Measurement Wheel Alignment-This adjustable gauge allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing. Measures the Camber and Caster angle on the wheel hub or brake disc..
  • Professional Tools-Professional adjustable magnetic gauge tool measures the Camber and Caster angle on the wheel hub or brake disc, suitable for automobile cars motorcycles trucks vans SUV tire repair..
  • Easy to use-it has a powerful magnet could be easily mounted on all kinds of metal surface,easy to use.(Note:Please double check and make sure the panel is balance before using.You could screw the button behind the gauge to adjust panel level)..
  • This adjustable magnetic gauge tool also it could be used as a normal gradienter (Magnetic mount could be released),It has a simple leveling adjustment from -5 degrees to 5 degrees.The body of gauge is made of high density aluminum and precision level vial..
  • Satisfaction guaranteed! Try any product we sell for a full 30 days. If not completel....
Check Stock

ITEQ Brake Lining Thickness Gauge 8 Piece SAE & Metric Steel Constructions

  • Color coded brake pad gauge to identify thickness level ranges for brake lining inspection.
  • The brake measuring tool can be used to quickly gauge any vehicle including trucks and heavy duty transportation.
  • Set of 8 gauges denoting 3 thickness levels: Green, Yellow & Red, which indentify if the brakes are still good (Green), should be serviced (Yellow) and must be serviced (Red).
  • Each gauge blade has both Metric & SAE: 3 green (12, 10, 8 mm & 0.4724, 0.3937, 0.3150 inch), 3 yellow (6, 5, 4 mm & 0.2362, 0.1969, 0.1575 inch), and 2 red (3, 2 mm & 0.1181, 0.0787 inch).
  • Constructed out of steel with powder coat riveted together for extra strength and durability.
Check Stock

Segomo Tools Adjustable Universal Magnetic Camber Gauge | Camber Alignment Tool | Alignment Car Tool | Wheel Alignment Tool | Castor Wheel Gauge | Magnetic Gauge Tool | Caster Alignment - WCC01

  • [ Versatile Use ] Our alignment tool is ideal for measuring and checking the camber and castor angle on a wheel hub or brake disc, maintaining correct wheel alignment even after tire wear and can also be used as a normal gradienter..
  • [ Unversal Camber Tool ] Allows you to return the strut to the original camber position after dismantling and re-assembling or to check the amount of camber change before re-installing..
  • [ Easy-To-Use Magnetic Gauge ] Features a simple to use and easy to read leveling adjustment from -5 degrees to 5 degrees with a powerful magnet for easy mounting on all kinds of metal surfaces..
  • [ Durable Design ] Our alignment car tool is made from high-quality aluminum for strength and durability with precision vials for accurate measuring..
  • [ Multi-Purpose Camber Tool ] Suitable for motorcycles, automobile cars, vans, trucks and SUVs..
Check Stock

Autel MaxiTPMS TBE200(With Extra Screen Wiper) Tire Tread Depth & Brake Disc Wear 2in1Tester with Dual Camera Real-time Data No Need to Remove Wheel During Testing Better Performance with ITS600

  • The TBE200 can be checked for tread depth and brake disc wear in one tool without the need to remove the wheel. Technics can obtain a comprehensive test report on TPMS health, tire tread depth, brake disc wear characteristics and repair tips (ITS600 required) through ITS600..
  • The TBE200 is a inspector with a measuring accuracy of 0.1 mm. Measure tread depth/brake disc wear without removing wheels..
  • The TBE200 is equipped with a 1.65-inch AMOLED Super Retina touch screen, with real-time display of measurement data and curves, full tread measurement/quick check. It is compatible with passenger cars, off-road vehicles and commercial vehicles..
  • The TBE200 helps technicians obtain uneven wear analysis, replacement and maintenance advice (tire/brake disc replacement, tire rotation/alignment repair)..
  • TBE200 can scan DOT, tire expiration notification, tire recall lookup, take pictures of tire wear and damage, take pictures of tire wear and damage. it comes with 1 year warranty and 30 days refund services.
Check Stock

Fowler 74-150-020 EZ-Drum Electronic Brake Drum Gage

  • Central Tools-Brake Fforcee Rotor Gauge-Digital accuracy with Swiss electronics.-Drum gages have selectable depth stops to reduce measuring errors.-Pointed Aanvill measure scored or unscored surfaces.-Show customers why their rotors or drums need replacing or turning.-Rotor gages have depth rods to check pad and shoe wear.-Specifications:.
Check Stock

CNC Mountain Bike V Brake Set, Bicycle V Brake for Front/Rear,1Pair

  • 【Braking System】:Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way hydraulic brakes for mountain bike system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or sc....
Check Stock

Ecore Measure Tool with scale For Brake Shoe Gauge Auto Brake pad

  • Measuring the distance between the lower side of the backing plate and brake disc..
  • Designed for both internal and external brake pads, features a 1.5mm and calibration check marking.
Check Stock

PETCHOR HB-100 Line Pulling Hydraulic Disc Brake Calipers Mechanical Disc Brakes for MTB Mountain Bike E-bike and Electric Bike 2PCS Front/Rear Gold

  • 【Braking System】:Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way hydraulic brakes for mountain bike system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or sc....
Check Stock

Farbetter Bike Disc Brake Kit Including Front and Rear Caliper 160mm Rotor Mechanic Tool-Free Pad Adjuster for Mountain Bike Road Bike Fixed Gear Bike MTB BMX Red

  • Brake System: Mechanical Disc Brake System with 2 x 160mm Rotor, 1 x Front Brake Caliper.
  • 1x Rear Brake Caliper, 1x Rear Brake Cable, 1x Disc Rotor Adjuster, and 12 X Disc Brake Rotor Screws..
  • High-quality materials: Brake Calipers Include XTR Disc Brake Pads, braking sensitive and quiet, high temperature resistance. Reinforced disc brake base design, high strength and anti-breaking..
  • Dimension: IMD international dimension, front caliper for 160/180mm rotor, rear caliper for 140/160mm disc. Extra Gadgets-Disc Rotor Adjuster, help you to adjust the gap between rotor and caliper easily..
  • Ideal Replacement: with fine workmanship, is your bicycle ideal upgrade parts, and packed in a box to presented in the original for you..
  • Widely Compatible: Suitable for most Mountain Bike, Road Bike Mechanical Disc Brake System..
Check Stock

Bike Hydraulic Disc Aluminium Alloy No Rust Bicycle Hydraulic Disc Brakes Levers Calipers Front Rear Brake Set(Purple)

  • ?GOOD SENSITIVITY, PRACTICAL? This bike hydraulic disc brake is controlled by the brake line, good sensitivity, practical. Exquisite piano paint process and delicate texture of the bicycle front rear brake set , providing comfortable hand smooth..
  • ?SAFE TWO WAY BREAK?The cycling hydraulic disc brake hydraulic piston two-way brake, safe to use. Easy to install, safe and strong. It is convenient to operate the brake..
  • ?5 DIFFEREMT COLORS?Our bicycle oil disc brake with 5 different colors for you to choose, meet your different needs. Bike disc brake can be g great choice for all users..
  • ?CORROSION RESISTANCE, STURDY? This bike hydraulic disc adopts quality aluminium alloy material, wear resistant, corrosion resistance, sturdy and durable. Premium ensures for long use time..
Check Stock

Farbetter Mechanical Bike Disc Brake Kit, Including Front and Rear Caliper, Brakes Cables, Brake Levers, 160mm Rotor, with Cable End Tips Caps, Rotating S-Hook Clips, Disc Rotor Adjuster (Black)

  • Brake System: Mechanical Disc Brake System with 2 x 160mm Rotor, 1 x Front Brake Caliper.
  • 1x Rear Brake Caliper, 1x Brake Cable Kit, 1x Disc Rotor Adjuster, 4x Cable End Tips, 2x Rotating S-Hook Clips and 12 X Disc Brake Rotor Screws..
  • High-quality materials: Brake Calipers Include XTR Disc Brake Pads, braking sensitive and quiet, high temperature resistance. Reinforced disc brake base design, high strength and anti-breaking..
  • Ideal Replacement: Choose the best for each component, and you can upgrade it in one step with only one purchase. With fine workmanship, is your bicycle ideal upgrade parts, and packed in a box to presented in the original for you..
  • Dimension: IMD international dimension, front caliper for 160/180mm rotor, rear caliper for 140/160mm disc. Extra Gadgets- Cable End Tips prevents wire core from bifurcating, resulting in uneven force on the wire core off-line.
  • Disc Rotor Adjuster help you to adjust the gap between rotor and caliper easily..
  • Widely Compatible: Suitable for most mountain bike of mechanical disc brake system. Please check the size of your bike and whether it is suitable to install mechanical disc brakes to avoid buying it by mistake..
Check Stock