Categories

Best Dish Head Bolt

Backyard Discovery 10 Foot Wave Slide, Easy One Piece Installation, Yellow

  • 10' (118" actual length) Wave slide is compatible with deck heights of 53 to 60 inches high.
  • Age Range: 3 to 10 - Supports up to 250lbs.
  • Super deep wave slide (actual depth is 10") ensures children remain safe while sliding.
  • Mounting lumber not included - Recommended 5/8 x 1 3/8 x 20 3/8 inches.
  • Mounting hardware not included - Recommended rounded head 5/16” bolt with flat washers and a locking nut (Truss head, Carriage bolt, Pan head bolt would all work.).
  • Strong one piece construction with 3 bolt installation.
  • Limited Lifetime Warranty against cracking and fading.
  • Engineered to meet or exceed ASTM standards (code F1148-19) for intended use in private residential settings. Warranty is applicable for intended use only..
  • Assembled dimensions-118" x 23.5" x 18" - Shipping dimensions -118” x 17” x 26”.
Check Stock

Full Circle Be Good Kitchen Dish Brush with Bamboo Handle, Green

  • TOUGH DISH BRUSH: Our Be Good kitchen dish brush gets to work on baked on mess with ease.
  • strong, stiff recycled plastic bristles takes the hard work out of dish cleaning and scrubbing.
  • LONG HANDLE SCRUBBER: This dish brush with long handle gives a secure, comfortable grip and complete control, and the angled head gets into corners and under dish rims for a cleaner finish.
  • STYLE AND FUNCTION: With a small footprint by your kitchen sink, the bamboo handled scrub brush head features a built in scraper, this dish brush is safe for use on any type of cookware, including non-stick.
  • EASY CARE CLEANING SUPPLIES: To keep your dish scrubber in the best condition, wash it in warm soapy water and allow to dry.
  • use a natural oil to keep the long bamboo handle pristine.
  • EARTH FRIENDLY MATERIALS: Made from bamboo and recycled plastic, and supplied in minimal, sustainable packaging.
  • Full Circle is a certified B-Corp company, plastic neutral and ship carbon neutral.
Check Stock

Backyard Discovery 10 Foot Wave Slide, Easy One Piece Installation, Green

  • Compatible with deck heights of 53 to 60 inches.
  • Mounting lumber not included - Required 5/8 x 3/8 x 20 3/8 inches.
  • Mounting hardware not included - Rounded Head 5/16” Bolt x 1 ¼” long with flat washers and a locking nut (Truss head, Carriage bolt, Pan head bolt would all work. ).
  • One-piece construction for easy assembly.
  • Shipping dimensions -118” x 17” x 26”.
  • Limited Lifetime against cracking and fading.
  • Engineered to meet or exceed ASTM standards (code F1148-19) for intended use in private residential settings. is applicable for intended use only..
Check Stock

Tanaka 350mm Deep Dish 6 Bolt PU Carbon Fiber Steering Wheel (Universal)

  • High Quality PU leather with Carbon Fiber look.
  • 3" Deep 350mm Deep Dish style using 6 bolt steering hub adapter.
  • Single Horn button, universal fit, does not include installation instructions, professional installation is recommended..
  • Come with wiring kit for horn, 6 x Silver hub bolt and allen hex key tool.
Check Stock

Dish Wand with 7Pack Replacement Dish Wand Sponges,Not Easy Leak Dishwand and Long Lasting Replacement Sponge Heads,Dish Brush Pads Kitchen Cleaning Sets

  • WHAT WE IMPROVED: They made of much more durable and thickness scrubber material . Green dish scrubber ,yellow sponge and plastic component are stronger and tight closer than others , don’t worry easy to fall apart.We improved the system of soap dispenser,press the sponge suck out soap automatically, without headache of leaking..
  • WHAT YOU GET : 1Pack Durable Dish wand And 7Pack Dish wand replacement sponge heads..
  • WHAT SPONGE HEAD SUIT FOR : These sponge refill head suit for most common dish wands..
  • HOW TO USE :The dish wand replacement sponge pads are convenient to get stuck with slight push..
  • WHAT WE SUPPORT: We put a lot of care into every sponge wand refill head we make, and we’re sure you’ll love them. But if you don’t,please let us know and we will try to let satisfied.
Check Stock

Rexka 15 pcs Fender Liner Bumper Cover Splash Shield Wheelhouse Liner Bolt Screw Compatible with GM 11570498 Chevrolet Camaro Colorado Corvette Cruze Equinox Silverado Malibu Traverse Cadillac Buick

  • Other Names:Wheelhouse Liner Bolt, Bumper Cover Bolt, Guide Bracket Bolt, Bumper Filler Bolt, Lower Cover Bolt, Flare Retainer, Flare Bolt, Splash Shield Bolt, Upper Cap Bolt, Lower Deflector Bolt, Lower Baffle Bolt, Bumper Cover Upper Bolt, Daytime Run Lamp Bolt, Upper Center Pillar Trim Bolt, Guide Bolt, Lower Grille Upper Bolt, Headlamp Assembly Bolt, Outer Bracket Screw, Reinforcement Bolt, Fog Lamp Assembly Bolt, Inner Grille Bolt, Side Retainer Bolt, Wheelhouse Liner Screw.
  • Other Names: Mount Bracket Bolt, Grille Assembly Upper Bolt, Corner Trim Bolt, Windshield Pillar Trim Bolt, Impact Bar Bolt, Bumper Cover Retainer, Side Impact Bag Bolt, Bumper Cover Lower Bolt, Side Cover Bolt, Center Duct Bolt, Lower Bracket Bolt, Tailpipe Extension Bolt, Absorber Bolt, Inlet Duct Bolt, Console Assembly Bolt, Upper Grille Bolt, Step Pad Bolt, Bracket Bolt, Grille Assembly Bolt, Vent Grille Bolt, Lower Absorber Bolt, Lower Support Bolt,Outer Brace Screw, Bumper Cover Screw,.
  • Replaces GM 11570498 ,Black Finish 4.2 - 1.41 x 20mm, 7mm Indented Hex Head, Loose Washer.
Check Stock

Carriage Bolt 18-8 Stainless Steel 1/2'-13 x 18' Qty-25

  • A carriage bolt has a domed or countersunk head and the shank is topped by a short square section under the head of the bolt..
  • The square section grips into the part being fixed, preventing the bolt from turning when the nut is tightened..
  • Carriage bolts are often used to fasten wood panels or board to masonry or to one another..
  • The square shank of the bolt allows it to lock into place when inserted into a round hole in wood or a square hole in a metal strap, the unthreaded square shank pulls into the wood creating a tight connection..
  • 18-8 Stainless steel is corrosion and rust resistant. 18-8 Stainless steel is considered the fastener industry standard..
Check Stock

Ives FB458 US26D Manual Flushbolt for Metal Door, Satin Chrome Finish

  • When the active door is opened, the lever can be moved to the ‘up’ position, retracting the bolt and allowing the inactive leaf to be opened.
  • When the inactive leaf is closed, the lever can be moved to the ‘down’ position, projecting the bolt into the strike and securely locking the inactive leaf.
  • Round bolt head requires only a punched hole.
  • Special design of guide and flat sided bolt tip to prevent bolt rotation.
  • Bolt throw is 3/4″ with a 7/8″ vertical adjustment.
  • Rod Length is 12″, which is measured from the center of the flush bolt body to the bolt tip.
Check Stock

Red 3-Spoke 15 Dia, Cushion Grip Steering Wheel, 2.75 Inch Dish

  • This 15" steel steering wheel is perfect for the budget minded racer.
  • Three spoke design with a 2-3/4" dish fits well in almost any interior.
  • Fits standard 3 bolt quick release hubs or can also be used with 3 bolt steering column adapters without a horn.
  • Rubber cushion coating on steering wheel improves grip and reduces driver fatigue.
  • Steering wheel center is black with your choice of grip color in black, red, blue, or purple.
Check Stock

LEGO Ultra Agents 70163 Toxikita's Toxic Meltdown

  • Includes 4 minifigures with weapons and accessories: Toxikita, Retox, Agent Curtis Bolt and Astor City Scientist.
  • Lab features revolving door, safety claws, crystal element, containment unit with explode function, satellite dish, security camera, 2 flick missiles.
  • Weapons include a stud shooter and a toxic super blaster. Accessories include Agent Curtis Bolt's helmet and the Astor City Scientist's safety gear.
  • Download the free LEGO Ultra Agents app for the ultimate digital experience where you become the agent!.
  • Lab measures over 5" high, 6" wide and 1" deep. Toxikita's chopper measures over 3" high, 12" long and 5" wide.
Check Stock

Dish Cleaning Brush, Soap Dispensing Dish Brush Set with 4 Replacement Heads and Storage Holder, Kitchen Scrub Brush for Dish Pot Pan Sink Cleaning (Grey)

  • Effortless Soap Dispensing Dish Brush: Gently push the button to release right amount of dish soap on demand for all kinds of scrubbing. The brush head can be easily removed and replaced. Save more dish soap for you and make your dishwashing work more enjoyable and efficient.
  • Extra Holder for Easy Storage: Comes with a holder to store the soap dishwashing brush and the other three replacement brush heads, the sink at the bottom can catch dripping water after use, which greatly save space and keep your kitchen tidy, clean and dry.
  • Durable Replacement Brush Heads: This kitchen dish brushes set contains 1 tough bristles head, 1 rubber bristles head and 2 sponge heads, which is durable and not easy to deform and can effectively scrub the dirt without hurting the cooking utensils. Simply twist and lock the sponge heads or bristle brush onto the dish wand to use.
  • Non-slip & Solid Handle: The ergonomic handle can be held comfortably in your hand even when wet and soapy, anti-slip and leak-proof. After cleaning, simply put the brush handle back into the holder for storage or hang it up on the wall.
  • Widely Application: The multi-purpose kitchen soap dispensing dish brush set is an ideal cleaning tool for dishes, pots and pans, tableware, sinks, stovetops, cutting....
Check Stock

T Track Hold Down Clamps Woodworking T Slot Clamp 20mm Dog Hole Clamp Quick Acting Aluminum Alloy

  • ...gs, fixtures and some fences that rely on a track system. Having a cam clamp on your router table fence makes is so much easier to make quick adjustments and quickly lock the fence in place..
  • The clamp body is made out of aluminum, measures approximately 1-1/2” long and each clamp has a standard 3” long hex head bolt that works with most standard sizes of t-track (depending on which size Cam Action Clamp you purchase). Be sure to get the correct size for your needs. Typically that means you should check to see what size slot or track you would like to use the clamps in..
  • The Cam Action Clamps are available in ¼” 5/16” and 3/8” hex head bolt sizes. Another nice feature of the Cam Action Clamps is that you can swap the bolts out for different situations..
  • For instance, if you have a slot requiring a T-bolt, you can switch out the ¼” hex head bolt with a ¼” T-bolt. Each cam can exert up to 400 pounds of clamp pressure depending on how you set it..
Check Stock

Thinkpro 26Pcs Bolt Extractor Set and Drill Bit Kit, Multi-Spline Screw Extractors, Easy Out Broken Lug Nut Extraction Socket Set for Damaged, Frozen,Studs,Rusted, Rounded-Off Bolts, Nuts & Screws

  • Solid Construction: The Screw remover kit parts are precisely machined, and made of high-hardness chrome-molybdenum steel. Reverse spiral groove design bending down to provide maximum grip force to easily remove damaged bolts, nuts, and broken screws. The drill bits is made of HHS and the head is designed with a 135° angle. which is not easily worn and has strong penetration. Surface titanium nitride coating, effective anti-corrosion and rust prevention, extending service life..
  • Reverse Spiral Screw Extractors：Reverse spiral cutting cone extractors are designed to be driven into the head of a damaged bolt if its head is no longer usable and a wrench doesn’t “bite” it. The inside edges of the extractors are designed to “cut” into the damaged bolt’s head to allow it to rotate and ultimately extract it..
  • Widely Used: All premium industrial grade bolt extractors are strictly designed. The grip is firm, not easy to fall off, and provides more torque. Have been working around striped, rusted, stuck, and beheaded parts. Suitable for power drills, flat or allen wrenches, tap adapters. Its a must have for any mechanic or even a home owner when you have to assemble something or disassemble something that has a stripped o....
Check Stock