Categories

Best Distribution Module

Opto 22 SNAP-PAC-RCK16 - SNAP PAC 16-Module Mounting Rack

  • DIN Rail mount 30Amp 300V 2x12 position screw terminal block distribution module. Support for multiple module extension connections..
  • A / B position maximum current 30Amp(each position). A1~A12 total maximum current 30Amp(total positions). B1~B12 total maximum current 30Amp(total positions). A1~A12 / B1~B12 position maximum current 20Amp(each position). Maximum voltage 300V..
Check Stock

2Pack GPS Module,Navigation Satellite Positioning NEO-6M,Arduino GPS, Drone Microcontroller, GPS Receiver Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity

  • GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage.
  • With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect.
  • With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned.
  • USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna.
  • If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer..
Check Stock

Generic GT-U7 GPS Module GPS NEO-6M Navigation Satellite Positioning Satellite Positioning Receiver Compatible with 51 Microcontroller STM32 UO R3+ IPEX Antenna for Arduino Drone Raspberry Pi

  • IPEX antenna interface，Default distribution：Active antennas，5 DuPont lines.
  • GT-U7 module with high sensitivity, low power consumption, miniaturization and high tracking sensitivity, the coverage of positioning is greatly....
  • GT-U7 main module GPS module using the original UBLOX 7th generation chip, compatible with NEO-6M.USB interface, can be connected to the computer,....
  • Applications: Vehicle handheld devices such as PDA, vehicle monitoring phones, sharing bikes, sharing mobile power, cameras and other mobile....
  • Quality after-sales service, any problems with the product, we will quickly solve for you after receiving your email.
Check Stock

OONO 16 Amp 2x12 Position Terminal Block Distribution Module for AC DC

  • 16Amp 48V 2x12 position screw terminal block distribution module. Support for multiple module extension connections..
  • Rated current 16 Amp(total input or output), Maximum voltage 48V.
  • A / B terminal blocks, Pitch 7.5mm/0.295", Wire range 26AWG ~ 12AWG / 2.5mm square. Rated current 16Amp. Strip length 7mm. Screws - M3,steel, Cr3+ Zn....
  • A1~B6 / A7~B12 terminal blocks, Pitch 5.0mm/0.197", Wire range 26AWG ~ 12AWG / 2.5mm square. Rated current 16Amp. Strip length 7mm. Screws - M3,steel,....
  • UL CE CQC certified terminal blocks, FR-4 glass fiber PCB..
Check Stock

Professional RF Cable TV Signal Amplifier with High 40dB Gain

  • ...le outlet, cable TV box, antenna, DTV, CCTV DVR, MATV or all other RF modulated TV system. Designed for large multi-dwelling units(MDU) that require precise RF amplification with gain and slope adjustments for a professional installation..
  • High-power amplification to compensate for the attenuations of the passive TV distribution components like cable, taps, splitters and cable outlets. Advanced CATV hybrid circuitry providing extremely low-noise figure and minimum distortion. Adjustable gain control and tilt control allows for easy system balancing..
  • Solution in solving the problems of noise, interference and weakness after distribution. Boost RF coax signal with ease for more than 1700FT or 500m if RF TV source signal has fair 70/75dB strength to start with. Boosts the existing CATV or antenna signal strength for greater distance with minimum loss for more TV distribution..
  • Adjustable gain/attenuation to reduce overdriving. Adjustable tilt compensation to allow large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system. Supports full TV frequency range from 40MHz to 860MHz for analog/digital cable TV, UHF and VHF channels. Anti-Interference module design with advanced noise filer built in..
Check Stock

Power Distribution Block Car Audio,0/2/4 AWG in 4/8 AWG Out Solid Copper Amp Ground Distribution Connecting Block for Amplifier 2 Way

  • Power/Ground Distribution Block for Car Audio Amplifier,0/1 Gauge In and 2 Way 4/8 Gauge Splitter block Out.
  • Distribution Block Connection Module Made of Solid Pure Copper,Higher Conductivity.
  • High Temperature Resistant Base and High Strength Protective Cover, Strong and Impact Resistant, Safer.
  • Smaller Size, Greater Performance, Easier to Install and Hide in Your Car.
  • Wide Range of Applications, Suitable for Cars, Yachts, Motorcycles, RV and Other Audio and Video Systems.
Check Stock

CZH-LABS Screw Terminal Block Breakout Module Board for Arduino MKR.

  • DIN Rail Mount Pluggable 8x3 Position 10A / 300V Screw Terminal Block Distribution Module..
  • Input terminal: Screw terminal block, pitch 5.0mm/0.197.
Check Stock

Electronics-Salon DIN Rail Mount 20 Position 30A / 300V Screw Terminal Block Distribution Module.

  • DIN Rail Mount 20 Position 30A / 300V Screw Terminal Block Distribution Module..
Check Stock

Electronics-Salon Panel Mount 10 Position Power Distribution Fuse Module Board, for AC/DC 5~32V

  • Panel Mount Power Distribution Fuse Module Board..
  • Work voltage: AC or DC 5~32V, total current rating 40Amp. Dimensions: 150mm x 72.5mm x 29mm (W x L x H)..
Check Stock

E-outstanding 25dB HDTV TV Antenna Light Amplifie 1PC High Gain Low Noise Amplifier Kit TV HDTV Antenna Signal Booster Gain with USB Power Cable

  • ...le outlet, cable TV box, antenna, DTV, CCTV DVR, MATV or all other RF modulated TV system. Designed for large multi-dwelling units(MDU) that require precise RF amplification with gain and slope adjustments for a professional installation..
  • High-power amplification to compensate for the attenuations of the passive TV distribution components like cable, taps, splitters and cable outlets. Advanced CATV hybrid circuitry providing extremely low-noise figure and minimum distortion. Adjustable gain control and tilt control allows for easy system balancing..
  • Solution in solving the problems of noise, interference and weakness after distribution. Boost RF coax signal with ease for more than 2100FT or 650m if RF TV source signal has fair 70/75dB strength to start with. Boosts the existing CATV or antenna signal strength for greater distance with minimum loss for more TV distribution..
  • Adjustable gain/attenuation to reduce overdriving. Adjustable tilt compensation to allow large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system. Supports full TV frequency range from 40MHz to 860MHz for analog/digital cable TV, UHF and VHF channels..
  • Anti-Interference module design with advanced noise filer built in. -20 dB Output/Inpu....
Check Stock

Leviton 47693-16P 1x16 Premium Amplified CATV Module & 47615-NYL Push-Lock Pins for Structured Media Centers, Bag Of 20

  • Push-lock pins for structured media centers.
Check Stock

Victron Energy Lynx Power in Battery Connector

  • The lynx power in module is used to connect batteries via an external fuse, It can be useful if you have multiple parallel strings.
  • The Power In contains a negative and positive DC bus-bar with M8 bolts in which to connect batteries cables.
  • It can take cables up to 22 mm in diameter through the bottom entry guides, and no limit via the two side connections.
  • A modular DC bus bar, the Victron Lynx Power In is used to connect batteries to the Lynx DC distribution system.
  • Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation.
Check Stock

Resistance Power Divider DC-5GHz SMA-K Power Splitter Module Signal Power Splitter Industrial Eletrical Supplies

  • Support DC-5G power frequency, RF power splitter is easy to use in the practical life, which makes itself getting great popularity..
  • When it comes to the power distribution channel, resistance power divider makes one channel input signal into two channel..
  • Connector form is for SMA-K, which refers to standard female connector and external screw inner hole..
  • The connecting part has good contact performance, which ensures stable working..
  • Professionally designed, power divider module can be the perfect replacement for the old or damaged one..
Check Stock