Categories

Best Diy Exhaust Kits

DNA Motoring ZTL-25SS 16 Pcs 2.5 Inches Stainless Steel DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-Bend Kit, Universal Fit

  • Easy To Use: Slip Fit Joints to Provide Easiest Fabrication.
  • Universal Kit: 4 pcs 48" Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends.
  • Sturdy Structure: Made of High Quality Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
  • i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
Check Stock

DNA Motoring ZTL-25RAW 16 Pcs 2.5 Inches Mild Steel DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-Bend Kit, Universal Fit

  • Specification: 18-Gauge Piping Walls, Inlet / Outlet Size (IN) : 2.5" OD.
  • Easy To Use: Slip Fit Joints to Provide Easiest Fabrication.
  • Universal Kit: 4 pcs 48" Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends.
  • Sturdy Structure: Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
Check Stock

BRExhaust Stock Replacement Exhaust Kit For Mazda Miata MX-5 MX5 NA 1990 1991 1992 1993 1994 1995 - BRExhaust 106-0246 New

  • Fits, sounds and performs just like OEM - bolts on for an easy DIY installation, with no cutting or welding required. Longer exhaust pipes are replaced by multiple smaller sections, so they can be installed without having to remove axles or suspension..
  • Exhaust kits are manufactured from corrosion-resistant aluminized steel and include all the hardware, clamps and gaskets required for installation.
  • Leaves all emissions equipment intact, making it 50-state emissions compliant.
  • Fits 1990-1995 Mazda MX-5 Miata (chassis code NA).
Check Stock

DNA MOTORING ZTL-25SS-8P 8 Pcs 2.5 Inches Stainless Steel DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-Bend Kit, Universal Fit

  • Easy To Use: Slip Fit Joints to Provide Easiest Fabricatio.
  • Universal Kit: 2pcs 48" Straight Pipes, 2pcs 90 Degree Pipes, 2pcs 45 Degree Pipes, 2pcs 180 Degree U-Bends.
  • Sturdy Structure: Made of High Quality Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
  • DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
Check Stock

BETTERCLOUD 3 76mm Custom Mild Steel Mandrel Exhaust Tubing Pipe Straight & U-Bend Kit

  • ✔Exhaust System Finish: Natural, anti-rust coated finish..
  • ✔Each pipe is expanded on one end to allow easy installation..
  • ✔These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it..
Check Stock

HOW I FORGOT AND OVERCAME BROKEN HEART

  • Material：Made of stainless steel, anti-corrosive and durable,Exhaust tip surface polishing + color plating, exquisite workmanship, shiny bright and cool color of stainless steel electroplating process, can provide a smooth appearance for your car exhaust..
  • Installation：Exhaust silencers do not require replacement parts, no welding, no drilling, no professional installation, just fix the screws to the appropriate position of the exhaust pipe, which is a perfect replacement for old parts..
  • Features：After installation, it will enhance the hierarchy sense of your vehicles, full of elegant style,They Decorate the appearance of your car, make your car look new, and increase the style and sports effects, it is very suitable for your car..
  • DIY: Ideal car DIY, perfect substitute. The heart-shaped tail throat can also be given as a gift to family and friends. I believe it will bring surprises..
  • Compatibility：tailpipes are suitable for exhaust pipes with a diameter of 4cm-6.0cm / 1.57inch-2.36inch.Please measure the diameter of your pipe before buying..
Check Stock

Flanged Hex Head Bolts, Flange Bolts, Exhaust Manifold Bolt Kit M10X1.5-35mm 6-Pack

  • Aftermarket 03423 Exhaust Manifold Hardware Kit.
  • Stainless Steel construction provides strength and offers good.
  • The bolt kits are ideal for securing exhaust components and eliminating exhaust leaks.
  • Fits some Toyota,BWM,Lexus,Chevrolet models.Please check the size before purchasing.
Check Stock

3 Inches OD DIY Custom Exhaust Pipe Kit 16-Piecese Straight & 45/90 Degree & U-Bends

  • ▶️ These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end....
  • ▶️ Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability.
  • ▶️ i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • ▶️ Slip Fit Joints to Provide Easiest Fabrication.
  • ▶️ 16-Gauge Piping Walls, Inlet / Outlet Size (IN) : 3" OD.
Check Stock

Ingersoll Rand 308B Air Straight Die Grinder, 1/4\

  • POWER: Motor delivers 0.33 HP (0.25 kW) and 25,000 rpm free speed..
  • Piped Away Exhaust Ready: These die grinders are compatible with “piped away” exhaust kits, so you can transfer exhaust away from you and your workspace..
  • DURABLE: Ball-bearing construction improves balance, reduces vibration, and ensures a longer life.
  • RELIABILITY: Integral safety-lock throttle lever prevents accidental start up..
  • LIGHTWEIGHT: At only 1lb., the ergonomic composite housing protects this tool from cold air and offers greater operator comfort..
  • Built-in lubricating wick increases angle gear life.
  • Rear exhaust directs air away from the operator.
  • Powerful motor delivers 0.33 HP (0.25 kW) and 25,000 rpm free speed.
  • Durable ball-bearing construction improves balance, reduces vibration, and ensures a longer life.
  • Strong aluminum housing withstands tough operating conditions.
  • Small and lightweight design provides easy operation greater access to tight spots.
  • Easy-to-use, integral safety-lock throttle lever prevents accidental start up.
Check Stock

Car Accessories Heart Shaped Universal Car Exhaust Muffler Tip Stainless Steel Pipe Chrome Exhaust Tail Muffler Tip Pipe

  • Material：Made of stainless steel, anti-corrosive and durable,Exhaust tip surface polishing + color plating, exquisite workmanship, shiny bright and cool color of stainless steel electroplating process, can provide a smooth appearance for your car exhaust..
  • Installation：Exhaust silencers do not require replacement parts, no welding, no drilling, no professional installation, just fix the screws to the appropriate position of the exhaust pipe, which is a perfect replacement for old parts..
  • Features：After installation, it will enhance the hierarchy sense of your vehicles, full of elegant style,They Decorate the appearance of your car, make your car look new, and increase the style and sports effects, it is very suitable for your car..
  • DIY: Ideal car DIY, perfect substitute. The heart-shaped tail throat can also be given as a gift to family and friends. I believe it will bring surprises..
  • Compatibility：tailpipes are suitable for exhaust pipes with a diameter of 4cm-6.0cm / 1.57inch-2.36inch.Please measure the diameter of your pipe before buying..
Check Stock

LIFVEAN Tub & Tile Refinishing Kit Bathtub Countertop Paint Kit White Coating Bright Gloss Sink Reglazing Kit, White 30oz

  • ✔️DIY BY YOURSELF - Simply follow the product instruction on box and refinish the bathtub by yourself to make your tub and tile a new look , no need to cost too much.
  • ✔️NON-TOXIC & LOW ODOR - Water based formula made without harmful chemicals, just open windows for ventilation without expensive exhaust system.
  • ✔️24H CURE TIME - It takes 24 hours to set before using. Note: Make sure to use it within 3 hours after mixing A&B to ensure the best results.
  • ✔️BRIGHT GLOSS & LONG LASTING - It finished as bright as a mirror, with excellent wear and abrasion resistant performance.
  • ✔️KITS INCLUDED - ① Part 1A ② Part 1B ③ Part 2A ④ Part 2B ⑤Stirring rod x2 ⑥ Brush 【Cover 60~70 sq.ft 2 coats】.
Check Stock

GLOFE T10 194 168 Dash Instrument Pink/Purple LED Light Bulbs Bright Panel Gauge Cluster Dashboard LED Light Bulbs 10Pcs/Set

  • Material：Made of stainless steel, anti-corrosive and durable,Exhaust tip surface polishing + color plating, exquisite workmanship, shiny bright and cool color of stainless steel electroplating process, can provide a smooth appearance for your car exhaust..
  • Installation：Exhaust silencers do not require replacement parts, no welding, no drilling, no professional installation, just fix the screws to the appropriate position of the exhaust pipe, which is a perfect replacement for old parts..
  • Features：After installation, it will enhance the hierarchy sense of your vehicles, full of elegant style,They Decorate the appearance of your car, make your car look new, and increase the style and sports effects, it is very suitable for your car..
  • DIY: Ideal car DIY, perfect substitute. The heart-shaped tail throat can also be given as a gift to family and friends. I believe it will bring surprises..
  • Compatibility：tailpipes are suitable for exhaust pipes with a diameter of 4cm-6.0cm / 1.57inch-2.36inch.Please measure the diameter of your pipe before buying..
Check Stock

Mid Valley - 3'OD DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-bend Kit Set of 16

  • These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation..
  • Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • Package Included 4 x 48″ Straight Pipes 4 x 90 Degree Pipes 4 x 45 Degree Pipes 4 x 180 Degree U-Bends As our pics shown.
Check Stock