Best Dockside Boat Covers
Marinco 117A Marine Electrical Shore Power Pigtail Adapter 30-Amp 125-Volt Locking Male to 50-Amp 125/250-Volt Locking Female with Sealing Collar System Yellow
- 30 Amp 125V Locking Dock Side/Male Plug, 50 Amp 125/250V Locking with Sealing Collar System Boat Side/Female Connector.
- Allows you to connect from one dockside receptacle (or other power source receptacle) to one boatside inlet or equipment of a different power configuration.
- Fully molded and equipped with the Marinco unique sealing collar (where indicated) and covers for use in wet locations..
- Contoured Grip. Thumbprint Ground Blade Locator.
Check StockProMariner 63170 ProNauticP Series 2420P - 24 Volt, 20 Amp Battery Charger
- Up to 12 performance & Precision 4-stage charging profiles: charge, condition, maintain and Re-Condition. Automatic dockside power mode for 12 Volt DC lighting and appliances. Factory set For flooded (lead acid) batteries. Agm, gel selectable..
- Auto-ranging (100-250VAC/50-60Hz) global AC input with reduced harmonic distortion allowing all models to operate off a household power outlet connection. ProNauticP consumes less power so more AC power is available on board..
- Automatically Programs conditioning time Based on discharge State of batteries. Automatically de-sulfates batteries after 21 days in the maintain mode, improving reserve power performance & extending battery life..
- Real time indication of wiring faults or adverse conditions that may impact the operation of a boat’s charging system..
- Up to 12 performance & precision 4-stage charging profiles: Charge, Condition, Maintain and Re-condition. Automatic dockside power mode for 12 Volt DC lighting and appliances. Factory set for Flooded (Lead Acid) batteries. AGM, GEL selectable..
- Auto-ranging (100-250VAC/50-60Hz) global AC input with reduced harmonic distortion allowing all models to operate off a household power outlet connection. ProNauticP consumes less power so more AC power is available on bo....
Check StockTaylor Made Products PMW.1800 Premium Boat Mooring Whip (47' to 56' Boats)
- RELIABLE PROTECTION — Our premium mooring whips protect your boat against dockside damage. The fiberglass poles use a rocker arm base for premium, positioning your boat safely away from the dock for maximum protection in severe weather conditions.
- UNMATCHED QUALITY— Our boat mooring whips are high-quality from the sturdy fiberglass and each rod incorporates a low friction tip and whip cleat to enable easy retrieval for boarding-boaters rely on these whips to protect their vessels.
- SIZED FOR YOUR BOAT —The premium whips are designed for boats 33’ to 56’, 20,000 lbs. to 48,000 lbs. and are ideal for areas with high wakes, winds and tides.
- EXPERT DESIGN — Taylor Made Mooring Whips are engineered to perform and protect you boat from severe weather conditions. They are ideal in salt water and large tidal areas giving your vessel the protection it needs.
Check StockShade Tree Umbrella
- ...UV-resistant giving you the protection you need on your boat, dock or beach.
- VERSATILE USES — The shade umbrellas for boats are designed to be used on your boat when anchored or at idle speed on a calm day. They can also be used to protect against the sun on the beach or dockside. Lightweight and portable, this awning has a carrying case with a shoulder strap.
- CUSTOMIZABLE SETUP — The anchorshade has a four-point lokcing height adjuster and sur-lock push up mechanism, allowing you to adjust to your boat as needed up to 8'. Easy to install with the adjustable straps.
- SIZE AND COLOR OPTIONS —Available in 6' x 6', the the Taylor Made AnchorShade III comes with the shade, adjustable straps and hardware and carrying case. Choose from white, blue, teal, red, navy, forest green, sand, black, burgundy and grey.
- DURABLE DESIGN-The boat awning includes solid fiberglass ribs for a solid structure on a powder-coated aluminum frame that resists rust. The non-corrosive included hardware keep the umbrella taut and secure in winds less than 10 miles per hour.
Check StockTaylor Made Products MW.140 Standard Boat Mooring Whip (24' to 28' Boats/5000-10000 lbs.) , Black
- RELIABLE PROTECTION — Both our standard and premium mooring whips protect your boat against dockside damage. The fiberglass poles use a fixed angle base for standard and a rocker arm base for premium, positioning your boat safely away from the dock.
- UNMATCHED QUALITY— Our boat mooring whips are high-quality from the sturdy fiberglass and each rod incorporates a low friction tip and whip cleat to enable easy retrieval for boarding-boaters rely on these whips to protect their vessels.
- SIZED FOR YOUR BOAT —The standard dock edge mooring whips are designed for boats 20’ to 33’, 2,500 lbs. to 20,000 lbs.
- EXPERT DESIGN — Standard whips are designed for fresh or saltwater and moderate wakes to give your boat the maximum protection it needs to withstand the damage that severe weather brings. The heavy-duty fiberglass poles are top-performers.
- MADE IN THE USA — Our dock heavy-duty mooring whips are made in the USA, by the marine brand trusted by boaters everywhere- Taylor Made. Choose quality and performance from Taylor Made- setting the design standard for more than 100....
Check StockE-Motor Nations Grease, Polyrex EM, Electric Motor Bearing Grease, Blue Color
- STA-LUBE: Sta-Lube offers a range of high performance greases.
- Highly efficient products have been rigorously tested to meet the highest quality standards.
- MARINE WHEEL BEARING GREASE: Sta-Lube Marine Boat Trailer & Wheel Bearing Grease is a tacky.
- calcium sulfonate complex grease that is extremely water resistant and uses a highly refined base oil.
- providing superior rust and corrosion protection.
- DURABLE FORMULA: The calcium sulfonate complex thickener provides long-lasting performance for use in boat trailers.
- APPLICATIONS: Ideal to use on anti-friction bearings.
- PRODUCT SPECIFICATIONS: This marine grease is available in a 3 pack of 3 wt oz cartridges.
Check StockProMariner 63180 ProNauticP Series 2430P - 24 Volt, 30 Amp Battery Charger
- Up to 12 performance & precision 4-stage charging profiles: Charge, Condition, Maintain and Re-condition. Automatic dockside power mode for 12 Volt DC lighting and appliances. Factory set for Flooded (Lead Acid) batteries. AGM, GEL selectable..
- Auto-ranging (100-250VAC/50-60Hz) global AC input with reduced harmonic distortion allowing all models to operate off a household power outlet connection. consumes less power so more AC power is available on board..
- Automatically programs conditioning time based on discharge state of batteries. Automatically de-sulfates batteries after 21 days in the maintain mode, improving reserve power performance & extending battery life..
- Real time indication of wiring faults or adverse conditions that may impact the operation of a boat’s charging system..
- After 72 hours of not seeing a load greater than 5 amps, float voltage will be lowered consuming less energy during storage periods. (for flooded & sealed charge profiles).
Check StockClearsource Premium Dockside Water Filter
- Premium Marine Dockside water filter system engineered for dockside filling of freshwater tanks..
- Rugged, industry-exclusive, powder-coated metal chassis designed for easy setup between your water source and the fresh water connection on the dock..
- 5 micron 2.5 x 10 inch first stage filter removes sediments. .5 micron 2.5 x 10 inch second stage filter removes chlorine, volatile organic compounds,....
- All stainless steel fittings and hardware stand up to years of use..
Check StockProMariner 63120 ProNauticP Series 1220P - 12 Volt, 20 Amp Battery Charger
- Promar Digital performance charging System.
- Up to 12 performance & precision 4-stage charging profiles: Charge, Condition, Maintain and Re-condition. Automatic dockside power mode for 12 Volt DC lighting and appliances. Factory set for Flooded (Lead Acid) batteries. AGM, GEL selectable..
- Auto-ranging (100-250VAC/50-60Hz) global AC input with reduced harmonic distortion allowing all models to operate off a household power outlet connection. ProNauticP consumes less power so more AC power is available on board..
- Automatically programs conditioning time based on discharge state of batteries. Automatically de-sulfates batteries after 21 days in the maintain mode, improving reserve power performance & extending battery life..
- Real time indication of wiring faults or adverse conditions that may impact the operation of a boat's charging system..
- After 72 hours of not seeing a load greater than 5 amps, float voltage will be lowered consuming less energy during storage periods. (for flooded & sealed charge profiles).
Check StockProMariner 63140 ProNauticP Series 1240P 12-Volts 40-Amp Battery Charger,White
- Promar Digital performance charging System.
- Up to 12 performance & precision 4-stage charging profiles: Charge, Condition, Maintain and Re-condition.
- Automatic dockside power mode for 12 Volt DC lighting and appliances.
- Factory set for Flooded (Lead Acid) batteries.
- Auto-ranging (100-250VAC/50-60Hz) global AC input with reduced harmonic distortion allowing all models to operate off a household power outlet connection.
- ProNauticP consumes less power so more AC power is available on board.
- Automatically programs conditioning time based on discharge state of batteries.
- Automatically de-sulfates batteries after 21 days in the maintain mode, improving reserve power performance & extending battery life.
- Real time indication of wiring faults or adverse conditions that may impact the operation of a boat's charging system.
- After 72 hours of not seeing a load greater than 5 amps, float voltage will be lowered consuming less energy during storage periods (for flooded & sealed charge profiles).
Check StockAffordura Boat Fender Covers Fleece 2 Pack Marine Fender Covers for Boats Bumper Covers 8.5X 16 in
- Warranty and package- one year warranty offered by Affordura boat fender covers. The package contains 2x 8.5x 16 in bumper covers for boats, suitable for 6.5 inch boat fenders..
- Soft Fleece- Made of exceptionally heavy, durable and soft boat fender covers fleece to keep your boat from getting all marked up from the fender. No scuffing to the gel coat of your boat..
- Easily install- Fit perfectly and easy tie on for installation on your fender, with a drawstring on one end and elastic string on the other end which are pulled tight and tied off..
- Fadeless- still keep the colors and hold up well in the sun, add the classic look of your fenders..
- Thicken fabric- Protects the fiberglas boat finish, after using the marine fender covers, the fender rubber doesn't leave marks on the side of the boats any more..
Check StockHudson Comfort Back To Back Boat Seat Covers - Replacement Boat Seat Covers, Super Soft Microfiber Fabric, Quilted Shape - 100% Waterproof Boat Covers For Damaged Seats, Blue
- BACK-TO-BACK BOAT SEAT COVER - Our back-to-back seat covers for boats are designed to fit perfectly even when the seats are opened as a bench. This versatile cover ensures your boat’s back-to-back seats always remain wrapped..
- PROTECTS YOUR BOAT’S SEATS – Our boat seat cover will help prevent fading and cracking of your boat’s back-to-back seats. The cover offers reliable protection against harmful saltwater, dirt, stains, and frost..
- 100% WATERPROOF - These boat seat covers are 100% waterproof to protect against water damage to your boat seats. Sail with confidence and never have to worry about the seats deteriorating..
- PREMIUM QUALITY - Our boat seat cover is made from premium 85gsm microfiber fabric that is super soft to the touch. Experience maximum comfort and a lush feel when sitting on them. They are blue to match the ambiance of the sea..
- EASY TO FIT - The Hudson Comfort back to back boat seat covers are easy to fit by Putting them over the seats and closing the zipper in the back..
Check StockTwo Medium Boat Speaker Covers for 6.5\ Round & 6X9 Oval Marine Wakeboard Tower Pod Speakers – Cover Size: Height 9.5\ X Width 9.5\ X Depth 11.25\ - Fits Boss Audio, MCM Custom Audio, Rockville
- ☀ 6.5" Round OR 6x9 Inch OVAL MARINE BOAT SPEAKER POD COVERS - Prolong the life of your marine power boat wakeboard tower speakers with SoundCover's unique UV 50 sun protection, breathable, water repellent speaker covers. Ideal year-round and boat storage protection! NOT to be used while towing the boat or while the boat is in movement!.
- ☀ TWO MEDIUM SPEAKER BAGS for 6.5 Inch or 6x9 WAKEBOARD SPEAKERS Height 9.5" X Width 9.5" X Depth 11.25" – Two (2) speaker covers will fit 6.5 Inch round wakeboard tower speakers or 6x9 oval speakers like the BOSS Audio MRWT69, Rockville RWB65 and MCM Custom Audio 60-10021. Will fit speakers: Height 9.5" X Width 9.5" X Depth 11.25". Marine speaker sizes available in Small, Medium, Large – see our other listings..
- ☀ REINFORCED STITCHING, DRAINAGE BUTTON & STRONG FASTENING STRAPS – Marine covers will fit wakeboard tower mounted speakers on boats, ATVs and Jeeps with strong fastening straps, drainage button for water trapped in the cover and reinforced stitching. A storage pouch is included..
- ☀ WILL FIT WAKE BOARD MOUNTED SPEAKERS on Boats, ATVs and Jeeps – The covers will fit wake board tower mounted speakers on boats, ATVs and Jeeps. Covers are packaged in a convenient SoundCover storage bag..
Check Stock