Categories

Best Docter Red Dot Mount

Monstrum Micro Red Dot Mount for Mossberg 500/535/590/835/Shockwave Series Shotguns | Compatible with Venom/Viper/Fastfire/Docter Standard Red Dots

  • For direct mounting of micro red dots to Mossberg 500/535/590/835/Shockwave Series shotgun models.
  • Available in either Docter or RMR standard footprint patterns. Refer to compatibility chart to confirm compatibility with your micro red dot..
  • Mounts directly into the factory mounting holes of Mossberg 500/535/590/835/Shockwave Series shotguns with no additional hardware required.
  • Package includes multiple screw sets of different lengths for compatibility between red dot manufacturers. Please use the set screws that match the depth of your red dot mounting holes..
  • All Monstrum mount and accessory products come with a lifetime guarantee.
Check Stock

Vector Optics Frenzy-S 1x17x24 Micro Red Dot Sight with MAG Footprint, Red Illuminated Reticle, 3 MOA Dot Size, Automatic Light Sensor

  • Easy to Zero in and mount:it's held its zero perfectly and great for pistols and rifles.Do not fit for RMR..
  • Comes with Weaver/Picatinny mount, adaptive base footprint compatible with Glock MOS , also compatible with different pistols mounting plates that replace rear sight dovetail, Vector Optics model SCRD-19II,SCRD-35,SCRD-40,SCRD-10A,SCRD-10B,SCRD-10C are designed to fit footprint of plate made for VT Venxx, BU FF, Docter etc any plate made for those brands also fits this sight..
  • 3 MOA dot: It promotes rapid target acquistion while providing a precise point of aim.
  • getting shots down range and on target fast.
  • Well Made Red Dot:The fully multi-coated, ultra-clear lens offers a wide, unobstructed field of view while quality coatings protect your lens from oil, dirt, and scratches..
  • Great red dot sight with lightweight:This red dot sight with compact design, This sight won’t negatively affect your firearm balance of handling.Pls make sure when installed,pls make sure plate level are correct in the pistol slide when installed.We are the professional manufacturer of the rifle scope,red dot and mount hardware.If there is any Parts missed or broken,Contact Us Via Amazon Mail ,A new replacement or money back guarantee..
Check Stock

TAC Vector Optics Micro Red Dot Sight 3 MOA Reflex Sight Mini with 8 Levels and Picatinny Mount Hold to Zero (Frenzy 1x17x24 )

  • Easy to Zero in and mount:it’s held its zero perfectly and great for pistols and rifles.Do not fit for RMR..
  • Comes with Weaver/Picatinny mount, adaptive base footprint compatible with Glock MOS , also compatible with different pistols mounting plates that replace rear sight dovetail, Vector Optics model SCRD-19II,SCRD-35,SCRD-40,SCRD-10A,SCRD-10B,SCRD-10C are designed to fit footprint of plate made for VT Venxx, BU FF, Docter etc any plate made for those brands also fits this sight..
  • 3 MOA dot: It promotes rapid target acquistion while providing a precise point of aim.
  • getting shots down range and on target fast.
  • Well Made Red Dot:The fully multi-coated, ultra-clear lens offers a wide, unobstructed field of view while quality coatings protect your lens from oil, dirt, and scratches..
  • Great red dot sight with lightweight:This red dot sight with compact design, This sight won’t negatively affect your firearm balance of handling.Pls make sure when installed,pls make sure plate level are correct in the pistol slide when installed.We are the professional manufacturer of the rifle scope,red dot and mount hardware.If there is any Parts missed or broken,Contact Us Via Amazon Mail ,A new replacement or money back guarantee..
Check Stock

Ade Advanced Optics Delta RD3-012 Red Dot Reflex Sight + Optic Mounting Plate for SW Smith Wesson MP/MP 2.0 Shield Pistol and Also a Standard Picatinny Mount

  • Comes with an removable standard picatinny mount and handgun mount(replace rear sight) fits CERTAIN SW models such as Smith & Wesson M&P Full Size, M&P 2.0 Full Size, M&P 22 Full Size, M&P Compact, M&P 2.0 Compact, SD9VE,SD40VE, M&P Shied.
  • The pistol mount included for SW does NOT fit Smith & Wesson M&P C.O.R.E Series (Already optics ready), M&P Shield EZ .380, M&P .22 Compact, SW9VE, SW40VE, SW40, SW9, Sigma, 1911.
  • 1.75″ length x1.25″ width x1.15″ height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A wind age and elevation adjustments with audible click.
  • The red dot is also compatible with Ade handguIt is designed to fit the slide/footprint on the cut made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight. Red dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off.
  • Top load System, no need to Remove the sight to change the Battery. 6 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dialing plate, User Manual, Installation screws and Picatinny mounting plate..
Check Stock

Ade Advanced Optics Optics Delrin Shims 1.0 Degree for Vortex Venom & Viper Burris Fastfire II III,Red dot Sight

  • Optic Shim is made to fit between the red dot and the mounting plate. Depending on the handgun, some handguns need THIS 1degree shim to give extra....
  • Do not return your "defective" red dot that can't adjust the illuminated dot high enough to zero. This optic shim solves the problem by raising the....
  • Fits: Vortex Venom & Viper, Burris Fastfire II, III, Docter Red Dot Sight, Insight, Eotech MRDS, Sightmark minishot, Meopta. All trademarks mentioned....
  • Also Fits: Ade Advanced Optics RD3-006, RD3-009, RD3-011, RD3-012, RD3-013, RD3-015. The center two screw holes might be 1 or 2mm off for some red....
  • What it does? While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turn(screw maxed-out),....
Check Stock

TRUGLO TRU-TEC Micro Red Dot Sight Open Reflex Optic for Pistols, Green Dot, Picatinny Mount

  • 3-MOA Red-Dot reticle for fast acquisition, 23mm x 17mm multi-coated objective lens, Digital push-button brightness controls, 10 brightness settings.
  • Compatible with optic-ready pistols, Common lug and bolt pattern for maximum compatibility (Vortex, EOtech, Docter, Insight, Meopta, etc.).
  • Ultra-lightweight (just over 1 oz.), CNC-machined from aircraft-grade aluminum.
  • Unlimited eye relief, Auto-off feature preserves battery life, Water-resistant (sealed o-ring design).
Check Stock

Ade Advanced Optics RD3-006A Green Dot Micro Mini Reflex Sight for Handgun

  • Fully windage and elevation adjustable and lockable.
  • Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).It is also compatible with varies handgun mounting plates that replace rear sight dovetail..
  • This Huracan Green Dot Sight fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided mount marked for Doctor/Venom type red dot..
  • However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol’s pre-cut is very short...
  • Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. Fully windage and elevation adjustable and lockable.
  • Unlimited Eye Relief. Powered by a lithium CR2032 battery.
  • ADE RD3 006,RD3 009,RD3 012,RD3 013,RD3 015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight..
Check Stock

UTG OP3 Micro SLS Red 4.0 MOA Dot Side Loading Sensor

  • Precision Machined From 6061-T6 Aluminum Construction Finished In A Matte Black Anodization, Ipx7 Waterproof Rated, Wide Field Of View 23Mm Lens.
  • Red 4.0 Moa Single Dot With 8 Brightness Intensity Settings, Manual Or Automatic Dot Brightness Intensity Adjustment Via Surrounding Light Sensor.
  • 15,000+ Hours Battery Life At Middle Brightness Setting, Side Loading Battery Compartment, No Longer Necessary To Remove Sight And Re-Zero.
  • Mounting Base Interface Uses The Common Docter Footprint, Removable Low Profile Picatinny Mounting Base Included.
  • Co-Witnesses With Most Suppressor Height Iron Sights, Rear Face Of Optic Hood Laser Engraved With Tertiary Aiming Point.
Check Stock

Ade Advanced Optics Red Dot Adapter Mounting Plate/Base/Convertor for Vortex Venom/Razor/Viper Burris Fastfire,Meopta,Docter Insight to FIT Sig Sauer P365XL / P365X Handgun

  • The existing optic cut on Sig P365XL and P365X only fits Shield RMS and ADE RD3-018 SPIKE footprint red dot, the existing optic cut does not allow red....
  • This Plate does NOT fit base/standard Sig P365 which does not has a optic cut. This plate does NOT fit red dot footprint such as trijicon rmr, shield....
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots..
  • Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots. It does NOT fit the....
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if....
Check Stock

ADE Red Dot Mounting Plate for Glock, Taurus GX4,G3C,G3 with Factory Steel Sight for Vortex Venom/Viper,Buris Fastfire

  • ...out factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots..
  • This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury..
Check Stock

ADE Zantitium RD3-015 Red Dot Sight + Rear Sight Optic Mounting Plate/Adapter for All Glock (Non-MOS,Non-Aftermarket Slide) Standard, Canik TP9SF and Taurus GX4/G3C/G3 with Factory Steel Sight Pistol

  • ...vetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands..
  • New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a CR2032 Battery(Included).Promotes rapid target acquisition while providing a precise point of aim.
  • getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery and re-sight in to waste ammo..
  • 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision.
Check Stock

ADE Bertrillium RD3-013 Red Dot+Rear Sight Optic Mounting Plate/Adapter for All GLOCK (Non-MOS,Non-Aftermarket Slide) Standard models,Canik TP9SF and Taurus GX4,G3C&G3 with factory steel sights pistol

  • New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 Battery(Included)Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands..
  • Promotes rapid target acquisition while providing a precise point of aim.
  • getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery and re-sight in to waste ammo..
  • 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision.
Check Stock

TRUGLO Dot Optic Mount for Shotguns Universal Rib Mount 4-Post Mount TG8954

  • Compatible with TRUGLO TRU-TEC Micro, Vortex Venom, Burris Fastfire, EOTech MRDS, Meopta Meosight series, and Docter optics and other compatible....
  • Mount a dot-optic to your shotgun's ventilated rib.
  • Fits ventilated ribs, . 236 in. (6mm) to . 395 in. (10mm) rib widths.
  • Optic stays with the barrel and maintains zero when changing barrels for different seasons.
Check Stock