Categories

Best Does Echo Plus Support Z Wave

GE Enbrighten Z-Wave Plus Dual Smart Plug Dimmer, Polarized Outlets Controlled Together, Built-in Repeater/Range Extender, Zwave Hub Required, Works with SmartThings, Wink, and Alexa, 14280

  • ALEXA COMPATIBLE – REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)..
  • Requires a Z-Wave certified gateway. Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris. Works with Alexa for voice control (hub required.
  • Wirelessly schedule, control and adjust the brightness of any two dimmable table or floor lamps from anywhere, at any time – space-saving design does not block second outlet access or obstruct furniture placement..
  • Dual outlet smart dimmer features two Z-Wave controlled outlets allowing control of two devices at the same time (cannot be controlled individually)..
  • Dimmer customizes lighting output and creates the perfect ambiance for any room – Works with dimmable LED, CFL, halogen and incandescent bulbs.
Check Stock

GE 12729 Z-Wave Wireless Lighting Control Smart Dimmer Toggle Switch, White

  • "ALEXA COMPATIBLE - REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)..
  • Requires a Z-Wave certified gateway. Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris. Works with Alexa for voice control (hub required.
  • The dimmer allows you to wirelessly schedule, control and adjust the brightness of any hard-wired, dimmable light in your home anywhere in the world, at any time of the day..
  • Easily replace any standard in-wall switch with the GE Z-Wave controlled dimmer switch to turn lighting On/Off or adjust dim levels with your mobile device or computer using any Z-Wave certified gateway. Can be controlled in groups of multiple lights or turned on or off within ambient interior lighting scenes..
  • Requires in-wall installation with hard-wired connections - Neutral wire is REQUIRED (wall plate not included).
Check Stock

JAS12724 - GE 12724 Z-Wave(R) in-Wall CFL-LED Dimmer Switch

  • Works with Alexa for voice control (hub required, Alexa device and hub sold separately)..
  • ALEXA COMPATIBLE - REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)..
  • Requires a Z-Wave certified gateway - Compatible with the following Z-Wave certified Hubs: Pulse, Trane, Wink, Alexa via Samsung SmartThings Hub, Nexia, Honeywell, HomeSeer, Smart Security, Harmony Home Hub Extender, Vera, Connect and Iris. Please Note: Kindly refer the User Manual and the Instructional Video before use..
  • The dimmer allows you to wirelessly schedule, control and adjust the brightness of any hard-wired, dimmable light in your home anywhere in the world, at any time of the day. Can be controlled in groups of multiple lights or turned on or off within ambient interior lighting scenes..
  • Easily replace any standard in-wall switch with the GE Z-Wave controlled dimmer switch to turn lighting on/off or adjust dim levels with your mobile device or computer using any Z-Wave certified gateway..
  • Screw terminal installation provides improved space efficiency when replacing existing switches compared to flying leads. Neutral connection r....
Check Stock

Zooz Z-Wave Plus S2 Outdoor Motion Sensor ZSE29

  • ... and mount it in minutes with just a couple of screws. Power it with batteries (included) or micro USB (cable + adapter sold separately). Program motion time-out and light level trigger by turning the knobs right on the sensor. New version (2.0) comes with advanced settings for motion sensitivity and lux reports if supported by your hub. Motion detection up to 20 feet..
  • COMPATIBILITY: The sensor works great on HomeSeer, Hubitat, Fibaro, and Vera. Custom device handler needed for SmartThings (go to Zooz support portal or contact seller for instructions). Does NOT work with Wink, Ring, ADT, or other Z-Wave alarm panels. Alexa is NOT a Z-Wave hub (the sensor won't work directly with Echo)..
  • SECURITY: Equipped with the latest authenticated S2 security protocol for encrypted signal and hacker-proof smart home (NOTE: your Z-Wave hub needs to support S2 for this feature to work). Tamper protection and low battery alerts for your peace of mind..
  • SUPPORT: Questions or issues? Zooz has fast and responsive US-based support to help you with set-up, functionality, and automation routines. Just ask!.
Check Stock

Minoston Z-Wave Switch On/Off Toggle Wall Light Switch Works with SmartThings, Wink, Support 3-Way Installation, Signal Repeater, Required Z-Wave Hub, White(MS12Z)

  • Voice Control: This Z-Wave smart toggle on/off switch is compatible with Alexa Echo and Google Home. REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products. CANNOT connect directly with ECHO PLUS..
  • Z-Wave certified gateway: The MS12Z is compatible with Samsung Smartthings, the Wink Hub, and all certified Z-Wave controllers..
  • Work with: This Z-Wave enabled universal switch works for most residential lighting control. It supports LED, CFL,incandescent and halogen bulbs. Supported voltage - 120 VAC..
  • Wireless control: Turn lights on/off, schedule, or group the light from multiple switches all with a smartphone app, automatically turn lights on when you are home, and off when you are away..
  • Installation Requires: hard-wired connections. Neutral wire required for single-pole and 3-way installation Ca This Z-Wave switch works w/existing (dumb) switch for a 3-way wiring scenario..
Check Stock

Outdoor Z-Wave Plus On/off Light and Appliance Plug, Two On/off Smart Outlet, Zwave Hub Required, Works with SmartThings, Wink, Alexa (ZW97)

  • Z-Wave outdoor plug, Requires a Z-Wave certified hub/ gateway. Compatible with SmartThings, Wink, Vera, Fibaro and so on..
  • Features two Z-Wave smart outlet ,with two integrated weather-resistant outlet covers that protects module from dirt and debris when not in use..
  • Wirelessly schedule and control your home's outdoor lighting and appliances, works with LED, CFL, halogen and incandescent bulbs and other devices. Supported voltage - 120 VAC, total load is max 15Amp..
  • Works with Alexa for voice control: Requires an Alexa supported hub for voice control with Amazon Echo products (Alexa device and hub are sold separately). Cannot connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)..
Check Stock

Aeotec Range Extender 6, Z-Wave Plus repeater

  • Z-Wave Plus wireless signal repeater and range extender. Compatible with Z-Wave and Z-Wave Plus..
  • Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave devices..
  • Plug in to 110 volt wall socket. Small design so it does not block other outlets.
  • Compatible with all Z-Wave gateways including Control4, Fibaro, SmartThings, and Vera..
  • Z-Wave Plus certified. Certification number: ZC10-16095239DescriptionYou use Z-Wave to manage your smart home. You use Range Extender 6 to keep Z-Wave reliable. Aeotec's Range Extender 6 works seamlessly to amplify and repeat weak Z-Wave and Z-Wave Plus signals. Simply plug it into a power socket, connect it to your Z-Wave network, and it automatically starts improving any poor Z-Wave signals that are in range. As it's custom desgined as a wireless signal booster, Range Extender 6 performs better than other Z-Wave devices that offer simply repeating.
  • it amplifies the signal too. Designed to use Z-Wave Plus, unlike previous editions Range Extender 6 can work with advanced Z-Wave features such as encryption and security devices such as door locks while remaining compatible with older versions of Z-Wave. It repeats signals 250% faster than other signal repeaters and can repeat Z-Wave signals up to 492....
Check Stock

HFS DC06 Microwave Radar Sensor Switch Module, 5.8G DC 5V Smart Motion Sensor Switch Board, Home Control Corridor Aisle Garage, etc

  • ... and mount it in minutes with just a couple of screws. Power it with batteries (included) or micro USB (cable + adapter sold separately). Program motion time-out and light level trigger by turning the knobs right on the sensor. New version (2.0) comes with advanced settings for motion sensitivity and lux reports if supported by your hub. Motion detection up to 20 feet..
  • COMPATIBILITY: The sensor works great on HomeSeer, Hubitat, Fibaro, and Vera. Custom device handler needed for SmartThings (go to Zooz support portal or contact seller for instructions). Does NOT work with Wink, Ring, ADT, or other Z-Wave alarm panels. Alexa is NOT a Z-Wave hub (the sensor won't work directly with Echo)..
  • SECURITY: Equipped with the latest authenticated S2 security protocol for encrypted signal and hacker-proof smart home (NOTE: your Z-Wave hub needs to support S2 for this feature to work). Tamper protection and low battery alerts for your peace of mind..
  • SUPPORT: Questions or issues? Zooz has fast and responsive US-based support to help you with set-up, functionality, and automation routines. Just ask!.
Check Stock

Aeotec Range Extender 6, Zwave Extender, Z-Wave Plus Repeater, 2 Pack

  • Z-Wave Plus wireless signal repeater and range extender. Compatible with Z-Wave and Z-Wave Plus..
  • Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave devices..
  • Plug in to 110 volt wall socket. Small design so it does not block other outlets.
  • Compatible with all Z-Wave gateways including Control4, Fibaro, SmartThings, Vera and more..
  • Z-Wave Plus certified. Certification number: ZC10-16095239.
Check Stock

UltraPro Z-Wave Smart Toggle Light Switch with QuickFit and SimpleWire, 3-Way Ready, Compatible with Alexa, Google Assistant, ZWave Hub Required, Repeater/Range Extender, White, 2-Pack, 54912

  • WIRELESSLY CONTROL & SCHEDULE LIGHTS AND OTHER DEVICES – Schedule timed events for connected devices. Customize scenes for day or night, home or away. Wirelessly control switch from anywhere through your smartphone, tablet, PC or Z-Wave remote. Switch can be operated manually..
  • REQUIRES A Z-WAVE CERTIFIED HUB - Compatible with the following Z-Wave Hubs: Honeywell, Ring, SmartThings, Wink, HomeSeer, Fibaro, Trane, Nexia, ADT, Vera, and more..
  • ALEXA COMPATIBLE (HUB REQUIRED) - Requires an Alexa supported hub for voice control with Amazon Echo Products (Alexa device and hub are sold separately).Cannot connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)..
  • IN-WALL INSTALLATION WITH HARD WIRED CONNECTIONS (NEUTRAL WIRE REQUIRED) – Replace your existing in-wall switch in as little as 15 minutes - Wall plate is NOT included. A neutral wire is required – please confirm that the wiring in your home is compatible before purchasing (older homes may not have neutral wires)..
  • COMPATIBILITY - Works with all LED, CFL, halogen, incandescent bulbs, and other devices..
Check Stock

UltraPro Z-Wave Smart Rocker Light Dimmer with QuickFit and SimpleWire, 3-Way Ready, Compatible with Alexa, Google Assistant, ZWave Hub Required, Repeater/Range Extender, White Paddle Only, 39351

  • FULL RANGE DIMMING – Give your space the perfect amount of light with the ability to customize the brightness levels from 0 to 100%. Works ONLY with dimmable bulbs and lamps..
  • WIRELESSLY CONTROL & SCHEDULE LIGHTS AND OTHER DEVICES – Schedule timed events for connected devices. Customize scenes for day or night, home or away. Wirelessly control switch from anywhere through your smartphone, tablet, PC or Z-Wave remote. Switch can be operated manually..
  • ALEXA COMPATIBLE (HUB REQUIRED) - Requires an Alexa supported hub for voice control with Amazon Echo Products (Alexa device and hub are sold separately). Cannot connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)..
  • REQUIRES A Z-WAVE CERTIFIED HUB - Compatible with the following Z-Wave Hubs: Honeywell, Ring, SmartThings, Wink, HomeSeer, Fibaro, Trane, Nexia, ADT, Vera, and more..
  • IN-WALL INSTALLATION WITH HARD WIRED CONNECTIONS (NEUTRAL WIRE REQUIRED) – Replace your existing in-wall switch in as little as 15 minutes. Includes a blue LED indicator light to locate the switch in a dark room. Wall plate is NOT included..
Check Stock

Honeywell Z-Wave Plus On/Off Smart Light Switch, In-Wall Paddle, Interchangeable White & Almond |Built-In Repeater & Range Extender | ZWave Hub Required - SmartThings, Wink, Alexa Compatible, 39348

  • WIRELESSLY CONTROL & SCHEDULE LIGHTS AND OTHER DEVICES– Wirelessly control switch from anywhere through your smartphone, tablet, PC or Z-Wave remote. Schedule timed events for connected devices and customize scenes for day or night, home or away – Switch can also be operated manually.
  • REQUIRES A Z-WAVE CERTIFIED HUB – Compatible with the following Z-Wave Hubs: Honeywell, SmartThings, Pulse, Trane, Wink, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Fibaro, Vivint and ADT..
  • ALEXA COMPATIBLE (HUB REQUIRED) – Requires an Alexa supported hub for voice control with Amazon Echo Products (Alexa device and hub are sold separately). CANNOT connect directly with ECHO PLUS or other Alexa products (Only ZigBee products can connect directly to Echo Plus)..
  • IN-WALL INSTALLATION WITH HARD WIRED CONNECTIONS (NEUTRAL WIRE REQUIRED) – replace your existing switch in as little as 15 minutes. Works with all LED, CFL, halogen and incandescent bulbs, and other devices..
  • INCLUDES CHANGEABLE PADDLE COLORS – includes white and light almond paddles to match any home décor. Features a blue LED indicator light to locate the switch in a dark room. Wall plate is NOT INCLUDED..
Check Stock

Honeywell Z-Wave Plus Smart Light and Appliance Control Duplex Receptacle Outlet, In-Wall Tamper Resistant| 1 Always On/1 Controllable | ZWave Hub Required - SmartThings, Wink, Alexa Compatible, 39349

  • ALEXA COMPATIBLE (HUB REQUIRED) – Requires an Alexa supported hub for voice control with Amazon Echo Products (Alexa device and hub are sold separately).Cannot connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)..
  • REQUIRES A Z-WAVE CERTIFIED HUB – Compatible with the following Z-Wave Hubs: Honeywell, SmartThings, Pulse, Trane, Wink, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Fibaro, Vivint and ADT..
  • SCHEDULE LIGHTS AND OTHER DEVICES- Schedule timed events for connected devices. Customize scenes for day or night, home or away. Wirelessly control switch from anywhere through your smartphone, tablet, PC or Z-Wave remote. Switch can be operated manually as well..
  • 2 TAMPER RESISTANT OUTLETS – 1 always-on grounded outlet (top) and 1 wirelessly controlled outlet (bottom). Both outlets are tamper resistant in order to prevent objects from being forcibly inserted into a single slot. Also features a blue LED indicator light to locate the outlet in a dark room..
  • IN-WALL INSTALLATION WITH HARD WIRED CONNECTIONS (NEUTRAL WIRE REQUIRED) – replace your existing outlet in as little as 15 minutes. Works with all LED, CFL, halogen and incandescent bulbs, and o....
Check Stock