Categories

Best Dome Head Semi tubular Rivets

POP Rivet 18-8 Stainless Steel - 8-8 1/4 x 1/2 Gap 0.376-0.500 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 8-12 1/4 x 3/4 Gap 0.626-0.750 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 3-2 3/32 x 1/8 Gap 0.032-0.125 Qty-250

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 8-6 1/4 x 3/8 Gap 0.251-0.375 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

Louisville Ladder FS1504 Ladder Step FBRGLS TYPE1A 4FT, 4-Feet, Orange (Renewed)

  • The product is 4 foot fiberglass type 1A stepladder.
  • Molded top with handyman’s tool slots, molded-in slots help keep tools close at hand.
  • 300 pound load capacity, includes weight of user and tools.
  • Each step secured with six, large headed, semi-tubular steel rivets for maximum strength.
  • Nonconductive full channel rails are covered with a polyester veil for years of durable service.
  • Heavy duty bottom back brace provides additional strength to the bottom of the ladder.
  • 300 Lbs, load capacity, includes weight of user and tools. Multifunctional Raptor Top With Multiple Tool Slots And Magnet.
Check Stock

100pcs Aluminum Oval Head Semi-Tubular Rivets - 3/32\X1/4\ OHTR332140

  • Semi-tubular rivets can be employed for multiple applications, such as luggage, brakes, and 3 ring binders.
  • Excellent fasteners to quickly and inexpensively join work-piece materials together.
  • Low cost installation tools available - Part number: HT-171.
  • These rivets are a low-profile professional fastener and are less visible than screws..
Check Stock

Louisville 6' Fiberglass Step Ladder

  • WORK BECOMES EASIER: Molded Top With Handyman's Tool Slots.
  • STURDY AND STRONG: With its 300-Pound capacity, elegant design and smooth finish, you won’t find a more durable, reliable ladder..
  • DESIGNED FOR YOUR NEEDS: Molded top with recessed tray, nonconductive structural molded top.
  • PROTECTED: Inside spreader braces keep your ladder protected while in transport as well as provide as safe and stable ladder.
  • 300-POUND LOAD CAPACITY, includes weight of user and tools.
  • Molded top with handyman's tool slots, molded-in slots help keep tools close at hand.
  • 300-pound load capacity, includes weight of user and tools.
  • Each step secured with six large-head semi-tubular steel rivets for maximum strength.
  • Non-conductive full-channel rails are covered with a polyester veil for years of durable service.
  • Heavy-duty bottom back brace provides additional strength to the bottom of the ladder.
Check Stock

Louisville Ladder FS1503 300-Pound Duty Rating Fiberglass Step Ladder, 3-Feet

  • Fiberglass is non-conductive when clean and dry.
  • 300 Lbs, load capacity, includes weight of user and tools.
  • Double rivet step xonstruction, each step secured with six, large headed, semi-tubular steel rivets for maximum strength, 30% greater shear strength than solid aluminum rivets.
  • Inside spreader braces, spreader braces inside fiberglass rails help keep braces from getting hooked or abused during transit.
  • The ladder meets or exceeds the safety standards set by ANSI, American National Standards Institute and OSHA, Occupational Safety and Health Administration.
Check Stock

Louisville FS1502 Fiberglass Heavy Duty Step Ladder, 28 3/8", 2-Step, Orange

  • Fiberglass is non-conductive when clean and dry.
  • 300 Lbs, load capacity, includes weight of user and tools.
  • Double rivet step construction, each step secured with six, large headed, semi-tubular steel rivets for maximum strength, 30 percent greater shear strength than solid aluminum rivets.
  • Inside spreader braces, spreader braces inside fiberglass rails help keep braces from getting hooked or abused during transit.
  • The ladder meets or exceeds the safety standards set by ANSI, American National Standards Institute and OSHA, Occupational Safety and Health Administration.
Check Stock

5/32\ x 1/4\ (DF11-8-ST) Steel Semi-Tubular Rivet with a 5/16\ Diameter Oval Head - Zinc Finish (Pack of 100)

  • Semi-tubular rivets can be employed for multiple applications, such as luggage, brakes, and 3 ring binders.
  • Excellent fasteners to quickly and inexpensively join work-piece materials together.
  • Low cost installation tools available - Part number: HT-178.
  • These rivets are a low-profile professional fastener and are less visible than screws..
Check Stock

1.5mm Hole Punch - Rivet Piercing and Setting Tool

  • The tool can pierce soft metals (brass, copper, silver) up to 20ga in thickness..
  • Now you can pierce and set semi-tubular rivets easily and more economically..
Check Stock

SEMI-Tubular Rivets, 6/16 inch, 100 Pack, Black Oxide

  • Excellent fasteners to quickly and inexpensively join work-piece materials together.
  • Long length rivets can be applied without buckling or bending the rivet shank.
  • Inexpensive alternative to threaded fasteners with good joint strength.
Check Stock

12' Alum. Extension Trestle Ladder 19'6\ MAX.

  • Extra heavy plated steel hinges form top of trestle and support slide guides for the fly section..
  • Plated steel spreader braces interlock with bottom pair of fly section slide guides..
  • Locking Bail - Hinged steel bail provides easy to use solution for locking fly section in place..
  • Each step secured with six, large headed, semi-tubular steel rivets for maximum strength..
  • Aluminum angle feet with thick rubber tread on all four legs to provide sure footing..
Check Stock