Categories

Best Door Knob Mortise Jig

Woodhaven 8570 1" x 2-1/4" Lockset Jig

  • Fastest, easiest, least expensive and most accurate way to cut a lockset plate mortise. Clamps to work so there's no nail holes or other unsightly blemishes. Jig attaches to a 3/4" wood fence you supply with the included hardware..
  • Made of 10mm (.393”) thick phenolic for heavy duty use, measures 3-5/8" x 5-5/8"..
  • Uses a bearing guided bit (our 8500 - sold separetly), or bushing & bit combination (5030K & 13416 - sold separately), to follow the jig for perfect mortises. Router & bit not included..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

Defender Security E 2311 Mortise Keyed Lock Set with Glass Knob – Perfect for Replacing Antique Lock Sets and More Fits Doors with 2-3/8 Backset

  • NEW INSTALLATION FIT – This lock set is perfect for interior doors with a 2-3/8" backset. INSTALLATION TIP - Use of thread locking adhesive on the set screw will keep knob from slipping.
  • BEAUTIFUL, TRADITIONAL GLASS KNOB LOCK SET - The E 2311 glass knob set is the perfect choice for replacing or updating interior door hardware. With a polished brass trim and beautiful glass knob, it’s the perfect choice for your next project..
  • LEFT OR RIGHT HAND INSTALLATIONS – The steel case mortise assemblies can be used for left or right hand installations, and can easily be installed on new and vintage doors..
  • REPLACe ANTIQUE LOCK SETS – This E 2311 Mortise lock set is the perfect choice for replacing knobs on old doors. No matter what interior door you’re fixing, this classic lock set will add the perfect finishing touch..
  • LOCK BOLT KEY – This entry door lock set is perfect as a privacy lock on bedrooms, bathrooms and other interior doors - the lock bolt is key activated from both the inside and outside..
Check Stock

Prime-Line E 2497 Mortise Keyed Lock Set with Glass Knob – Perfect for Replacing Antique Lock Sets and More, Fits Doors with 2-3/8" Backset

  • NEW INSTALLATION FIT – This lock set is perfect for interior doors with a 2-3/8″ backset. INSTALLATION TIP – Use of thread locking adhesive on the set screw will keep knob from slipping.
  • BEAUTIFUL, TRADITIONAL GLASS KNOB LOCK SET – The E 2497 glass knob set is the perfect choice for replacing or updating interior door hardware. With a classic bronze plated steel trim and beautiful glass knob, it’s the perfect choice for your next project..
  • LEFT OR RIGHT HAND INSTALLATIONS – The steel case mortise assemblies can be used for left or right hand installations, and can easily be installed on new and vintage doors..
  • REPLACe ANTIQUE LOCK SETS – This E 2497 Mortise lock set is the perfect choice for replacing knobs on old doors. No matter what interior door you’re fixing, this classic lock set will add the perfect finishing touch..
  • LOCK BOLT KEY – This door lock set is perfect as a privacy lock on bedrooms, bathrooms and other interior doors – the lock bolt is key activated from both the inside and outside..
Check Stock

Nostalgic Warehouse Classic Rosette with Deco Door Knob, Passage - 2.75\

  • NEW INSTALLATION FIT – This lock set is ideal for replacing broken lock sets on 1-3/8 in.-1-3/4 in. Interior doors..
  • BEAUTIFUL, CLASSIC BRONZE KNOB LOCK SET - The E 2495 bronze knob set is ideal for replacing or updating interior door hardware. With a classic bronze finish, it’s a great choice for your next project..
  • LEFT OR RIGHT HAND INSTALLATIONS – The steel case mortise assemblies can be used for left or right hand installations, and can easily be installed..
  • REPLACe ANTIQUE LOCK SETS – This E 2495 Mortise lock set is the perfect choice for replacing broken knobs on old doors..
  • LOCK BOLT KEY – This entry door lock set can be used as a privacy lock on bedrooms, bathrooms and other interior doors - the lock bolt is key activated from both the inside and outside..
  • For all dimensional information please refer to the line art and compare to your needs before purchasing.
Check Stock

Nostalgic Warehouse Victorian Plate with Keyhole Crystal Glass Knob, Single Dummy, Satin Nickel (702083)

  • Traditional mounting for vintage or new doors. Single Dummy Knob.
  • Coordinates with Nostalgic Warehouse's Premium Grandeur line.
  • Standard door thickness range is 1-3/8-Inch to 1-3/4-Inch. Comes with standard 2-3/8 backset.
  • Mortise lock versions available for vintage doors.
Check Stock

Trend Large Lock Jig with Baldwin Templates, TCT Router Bit & Guide Bush for Precise Door Lock Installations, LOCK/JIG/A

  • SUITABLE FOR BALDWIN LOCKS: This lock jig is compatible with two sizes of Baldwin locks, with faceplate sizes of 1-1/4" x 8" or 1" x 8" and mortise sizes of 1" x 5-23/32" or 7/8" x 5-23/32"..
  • FAST AND ACCURATE RESULTS: With this lock jig, you can achieve fast, clean, and accurate results on doors that are 1-5/16 inch to 2-1/4 inch thick, even in hardwood..
  • ADAPTOR PLATE INCLUDED: An adaptor plate is included with this lock jig to allow smaller templates to be fitted, as supplied with the standard LOCK/JIG..
  • COMPLETE ROUTING: This jig allows for precise routing of the faceplate and mortise for larger locks, ensuring proper fit and functionality..
  • INCLUDED/REQUIRED TOOLS: This lock jig comes with a 15/32” diameter ½” shank TCT router bit and 1-3/16” screw-on style guide bush. However, an auger bit and drill are required to complete deep mortises and the jig requires a router with 3-1/8” plunge..
Check Stock

Mobile Home Parts 3 New Storm Door Hinges Aluminum-Door Hinges-Gate Hinges-Door Hinge-Cabinet Hinge-Door Hinge jig-Door Hardware

  • 3 Storm Door Hinges Aluminum-Door accessories-Door hinge router jig-Mortise door hinge.
  • Hardware hinges-Outdoor hinges-Utility hinge-Hinge hardware-Hinge guide-Door hinges tools-Hinge template kit.
Check Stock

Nostalgic Warehouse 704659 Rope Rosette with Crystal Glass Knob, SINGLE DUMMY, Antique Pewter

  • Traditional mounting for vintage or new doors. Single Dummy Knob.
  • Coordinates with Nostalgic Warehouse's Premium Grandeur line.
  • For use on interior doors that require only a push/pull function, mounts directly to door.
  • Mortise lock versions available for vintage doors.
  • Traditional mounting for vintage or new doors. Two Dummy Knobs.
Check Stock

Modern MDF Interior Door 28 x 80 with Hardware | Quadro 4111 White Ash | Single Panel Frame Trims | Bathroom Bedroom Sturdy Doors

  • ✔️ SET INCLUDES- white interior door, trims 2.95 inches wide, frames for wall up to 5 1/2" thickness, non-mortise hinges, Satin Nickel door lever/knob. Please add 2" to door width and 1.25" to door height to determine minimal rough opening. Doors have NO bores for handles and hinges..
  • ✔️ LIKE PRE-HUNG DOOR- Door is not pre-attached to the frame. Set consists of all the necessary parts hanging the door. Frames connect before the installation. Hinges not require the slots for installation. Handle/knob hole should be drilled to install..
  • ✔️ WOOD DOOR- Door made of solid mdf and covered by eco-veneer. Pre-Finished, Eco Friendly, High Durability, Clean Ability & Quality, Stability Scratch & Stain Resistant.
  • ✔️ CUSTOM SIZE — Door can be trimmed on 3/4“ on top and bottom, on 3/4“ on left and right side as well. Different style of lever/knob can be provided per request.
  • ✔️ FULL RANGE OF HARDWARE- Every part can be customize on your desire. A lot of sizes and finishing are available. Different knob/lever style can be provided per request. We could provide a free color sample. Hardware can be shipped separately..
Check Stock

Defender Security Chrome E 2328 Mortise Style Fluted Glass Perfect for Replacing Broken Antique Lock Sets on Interior Doors, Features 2” Outside Diameter Knobs Plated

  • FLUTED GLASS KNOB SET - The E 2328 fluted glass door knob set is ideal for replacing or updating interior door hardware. With beautiful classic fluted glass and chrome plasted finish, it’s the perfect choice for your next project..
  • REPLACe ANTIQUE KNOB SETS – This E 2328 Mortise lock set is the perfect choice for replacing broken knobs on old or antique/vintage interior doors..
  • BEAUTIFUL, CLASSIC DESIGN – The design of these clear glass fluted knobs with a chrome plated finished knob base will fit perfectly into a vintage or antique style door..
  • EASY INSTALLATION  – Installation is quick and easy. Some components may need to be purchased separately..
  • PRODUCT INFO – These fluted glass door knobs are 2 in. outside diameter knobs with 1-15/16 in. projection and 17/64 in. x 3-1/2 in. square spindles. Has glass, diecast and steel components..
  • This door knob is made of glass. It can crack or break if banged against a wall or hit with a solid object like a hammer. Broken glass is very sharp and can seriously cut you. If door knob cracks or becomes loose, replace immediately. DO NOT let children hang from this product.
Check Stock

Entry Door Knob, Exterior/Interior Ball Door Knobs with Lock and Key, for Privacy Bedroom/Entrance, Satin Nickel

  • NEW INSTALLATION FIT – This lock set is ideal for replacing broken lock sets on 1-3/8 in.-1-3/4 in. Interior doors..
  • BEAUTIFUL, CLASSIC BRONZE KNOB LOCK SET - The E 2495 bronze knob set is ideal for replacing or updating interior door hardware. With a classic bronze finish, it’s a great choice for your next project..
  • LEFT OR RIGHT HAND INSTALLATIONS – The steel case mortise assemblies can be used for left or right hand installations, and can easily be installed..
  • REPLACe ANTIQUE LOCK SETS – This E 2495 Mortise lock set is the perfect choice for replacing broken knobs on old doors..
  • LOCK BOLT KEY – This entry door lock set can be used as a privacy lock on bedrooms, bathrooms and other interior doors - the lock bolt is key activated from both the inside and outside..
  • For all dimensional information please refer to the line art and compare to your needs before purchasing.
Check Stock

Pantry Kitchen Lite Door 30 x 80 with Hardware | Lucia 22 Matte White with Frosted Opaque Glass | Single Panel Frame Trims | Bathroom Bedroom Sturdy Doors

  • ✔️ SET INCLUDES- white half-glass door panels, trims 2.95 in wide, frames for wall up to 5 1/2" thickness, non-mortise hinges, Satin Nickel door lever/knob. Please add 2" to door width and 1.25" to door height to determine minimal rough opening. Doors have NO bores for handles..
  • ✔️ LIKE PRE-HUNG DOOR- Door is not pre-attached to the frame. Set consists of all the necessary parts hanging the door. Frames connect before the installation. Hinges not require the slots for installation. Handle/knob hole should be drilled to install..
  • ✔️ WOOD DOOR- Door made of solid pine wood and covered by eco-veneer. Pre-Finished, Eco Friendly, High Durability, Clean Ability & Quality, Stability Scratch & Stain Resistant.
  • ✔️ CUSTOM SIZE — Door can be trimmed on 3/4“ on top and bottom, on 3/4“ on left and right side as well. Different style of lever/knob can be provided per request.
  • ✔️ FULL RANGE OF HARDWARE- Every part can be customize on your desire. A lot of sizes and finishing are available. Different knob/lever style can be provided per request. We could provide a free color sample. Hardware can be shipped separately..
Check Stock

Defender Security E 2537 Mortise Style Fluted Glass Door Knobs - Perfect for Replacing Broken Antique Lock Sets on Interior Doors Features 2” Outside Diameter Knobs Classic Bronze

  • FLUTED GLASS KNOB SET - The E 2537 fluted glass door knob set is ideal for replacing or updating interior door hardware. With beautiful classic fluted glass and classic bronze finish, it’s the perfect choice for your next project..
  • REPLACE ANTIQUE KNOB SETS – This E 2537 Mortise lock set is the perfect choice for replacing broken knobs on old or antique/vintage interior doors..
  • BEAUTIFUL, CLASSIC DESIGN – The design of these clear glass fluted knobs with a classic bronze finished knob base will fit perfectly into a vintage or antique style door..
  • EASY INSTALLATION  – Installation is quick and easy. Some components may need to be purchased separately..
  • PRODUCT INFO – These fluted glass door knobs are 2 in. outside diameter knobs with 1-15/16 in. projection and 17/64 in. x 3-1/2 in. square spindles. Has glass, diecast and steel components..
Check Stock