Categories

Best Double Flare Tool 2

HVAC Flaring Tool Kit for 1/4 - 3/4 Copper Pipe Flare Tool 45°Eccentric Single Tubing Flaring Tool with Pipe Cutter & Deburring Tool for Copper Aluminum Pipes Refrigeration Air Conditioner Repair

  • The accuracy eccentric cone flaring tool produces 45 Degree flares in soft copper, brass, aluminum or stainless steel pipes. Widely used in HVAC, air conditioners, air heaters, refrigerators maintenance, etc..
  • Our HVAC Flaring Tool Kit comes with 2 types of flaring clamps applicable pipe O.D.Inch: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" Metric: 6mm, 9mm, 10mm 12mm, 16mm, 19mm)..
  • The eccentric flaring cone provides for easy clamping and removal of tubing, Large feed screw handle for smooth turning with little effort (NOTE: It will only do single flare - not double flare!).
  • The flare tool is designed with a clutch in the rotating handle, which will automatically disconnect when the flaring is completed..
  • Package includes 1x Flaring Tool, 2x Clamp(inch & metric type), 1x Deburring Tool, 1x Tube Cutter for O.D. 6-50mm tubes, 1x Manual Book, 1x Suitcase..
Check Stock

Bonvoisin Flaring Tool 1/4”-3/4” HVAC Single Flare Tool 45° Eccentric Tube Flaring Tool with Clutch Limit Piece for Copper Aluminum Tubing (one piece)

  • [Eccentric Type Cone] - The eccentrically mounting hardened steel flaring cone produces a rolling action for even metal flow, giving uniform flare walls without wear. Applicable tube outer diameter: Φ1/4 ", 5/16", 3/8 ", 1/2", 5/8 ", 3/4".(NOTE: It will only do single flare - not double flare!).
  • [Limit Piece & Clutch] - (1)After inserting the copper tube, the length of the flared tube can be precisely limited by the limit piece, which is more efficient and convenient than measuring by eyes only. (2)There is a clutch in the rotating handle, which will automatically disconnect when the flaring operation is completed..
  • [Ultralight] - The tubing flaring tool is made of aluminum alloy and is very light. It's less than 1kg, so you can hold it and work for a long time without getting tired..
  • [Wide Application] - The tube flaring tool is applicable to soft metal tubes such as copper tubes / aluminum tubes. Widely used in electrical products, like HVAC, air conditioners, air heaters, refrigerators, etc..
  • [Packing List] - This flare tool includes the gantry * 1, inch-type flaring clamp * 1 (without a case)..
Check Stock

TEMCo Industrial Universal Automotive Tube Flaring Tool Set Includes Push Connect Double Flare Fuel and Trans Cooler Dies TH1911

  • Dies and adapters to fabricate push connect fittings for 1/4, 5/16 and 3/8".
  • flare/double flare 3/16, 1/4, 5/16, 3/8 and 1/2".
  • Dies and adapters to fabricate GM fuel line flare, brake lines and transmission 5/16 and 3/8".
  • GM transmission cooling line 3/8" and 1/2".
  • Dies and adapters to fabricate metric bubble flare 4.75, 6, 8, and 10mm.
  • Dies have an enlarged compression area to grip the dies better.
  • Flaring tool set includes a Stabilizing Arm for easy tube forming.
Check Stock

Eastwood Professional Brake Line Flaring Tool Kit | 45° Degree Single Double & Bubble Brake Tubing Flares | Use with Hydraulic Hose | Ideal for Stainless Steel Tube or Copper Pipe | Inc 4 Split Dies

  • MULTI USE FLARING TOOL: This is an all in one brake line flaring tool kit device. Easily create precision single flare, double flare, or a bubble in your tubing. A high quality OEM style flare is essential, as nobody likes leaks especially in hydraulic, or brake lines. With the Eastwood tubing flare tool you’ll always get quality reliables results time after time!.
  • HOW TO USE: Use stainless steel, steel, or any other soft metal like copper tubing of 3/16-inch, ¼-inch, 5/16-inch, 3/8-inch and 4.75-mm diameter. Meaning this tool is multi purpose and ready to help with automotive brake lines, hydraulic lines, or even with plumbing pipes. Next simply use the rotating turret style flaring die mount to create the suitable flare for your needs..
  • EASTWOOD QUALITY: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “Do The Job Right”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support..
  • SAFETY INFORMATION: Always wear eye protection when operating the Flaring Tool as oils, grease and metal particles may be ejected while the tool is in operation. Make sure that th....
Check Stock

VEVOR Hydraulic Flaring Tool Kit 45° Double Flaring Tool Brake Repair Brake Flaring Tools for 3/16 -1/2 Brake Flare Tool with Tube Cutter and Deburrer 32 PCS Tube Flaring Tools for Copper Lines

  • Tube Expanding Functions: This hydraulic flaring tool is equipped with a 45° flaring cone and φ 3/16 - 1/2 inch expanding dies and adapters, including, push connects, GM fuel lines, GM transmission cooling line, 45° and double flares, ISO bubble flares..
  • Manual Hydraulic Mechanism: This hydraulic flare kit achieves the pipe expanding with a hydraulic mechanism. The hydraulic tool is designed with exquisite details, such as a pressure relief valve and no-leakage oil cylinder. You can easily operate this tool without effort..
  • Pipe Cutting & Deburring: The double flaring tool comes with a mini pipe cutter and deburrer, which can help to flare pipe. The cutter cuts tubes ranging from 1/8" -5/8" quickly with a solid and sharp blade. The deburring tool is used for cleaning the interior and exterior of tubing..
  • Durability & Portability: The flaring tool is durable 40 CR steel, which is reliable and built to last. Besides, the flaring tool kit is stored in a plastic toolbox, reducing the possibility of missing parts. It is compact and easy to carry..
  • Wide Application: This hydraulic flaring tool kit is suitable for expanding copper piping. It is an excellent tool for repairs on vehicles or making lines off a vehicle, ideal for the refrigeration and ai....
Check Stock

VEVOR Brake Line Flaring Tool, 37 & 45 Degree Single, Double, and Bubble Flares for 3/16', 1/4', 5/16' and 3/8' Tube Size, Suitable for Soft Metal of Copper Lines

  • Four Tube Expanding Size: This brake line flaring tool includes 4 dies in the following sizes: 3/16 inch (4.75mm), 1/4 inch (6.35mm), 5/16 inch (8 mm), 3/8 inch (9.5 mm). It creates 37° and 45° single, double, and bubble brake flares in seconds. Reduce the friction on flares to ensure your vehicle operates at optimal performance..
  • Applicable Materials: This double flare brake tool is suitable for expanding copper and aluminum piping. It is an excellent tool for repairs on vehicles or taking lines off of a vehicle. Whether you're working on brake lines, transmission cooler lines, or fuel lines, our flaring tool will help you create the flares you need quickly and easily..
  • Leakproof Connection: With the turret-style design, the professional brake line flaring tool keeps all your dies ready. They are available and within immediate reach with the convenient turret carrier, greatly saving you the hassle of fumbling for small parts or losing them..
  • Vise-Mounted: The brake line flare tool is compatible with a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under a car). The 6.3-inch (16 cm) T-handle screw clamp can hold the die and tube in place firmly without vibration. After repairing, your vehicle will be ....
Check Stock

Cal-Van Tools 166 Hydraulic in Line Flaring Tool 1 Pack,One Size

  • Combines features of inline flaring tool and a Hydraulic Flare tool to make a lightweight, low profile, easy to use tool.
  • Creates single, double and bubble Flares.
  • Fits into tight access areas allowing on car use.
  • Flare tubing sizes: SAE: 3/16", 1/4", 5/16", 3/8" metric: 4.75mm, 6mm, 8mm.
Check Stock

Mallofusa 3Pcs Muffler Tail and Exhaust Pipe Expander 1 1/8\ to 3 1/2\ Tool Set

  • Includes carrying case, spare o-rings, and 3 sizes of expander.
  • Large Flare Expander Tool: 2-1/8" To 3-1/2" Inner Diameter.
  • Medium Flare Expander Tool: 1-1/2" To 2-1/2" Inner Diameter.
  • Small Flare Expander Tool: 1-1/8" To 1-3/4" Inner Diameter.
  • 3 Different Sizes Make It Almost Suitable For All Kinds Of Pipes..
Check Stock

Shankly Double Flaring Tool Set Professional Grade Double Brake Flaring Tool Heavy Duty Brake Line Flaring Tool Kit and Swage Tool Flare Tool with Tubing Straightener or Cutter

  • ✅ ALL-INCLUSIVE KIT: Shankly’s standard flaring tool kit is all-inclusive, complete with double flaring capability with a professional tubing....
  • ✅ MULTIFUNCTIONAL FLARE ADAPTERS: This double flaring tool feature 7 adapter sizes 3/16",1/4",5/16",3/8",7/16",1/2" & 5/8, making this the only....
  • ✅ FITS YOUR APPLICATION: Shankly's flaring tool or brake line tool includes five swage fittings and several useful tube sizes: 3/16”, 1/4”,....
  • ✅ PRECISE AND DURABLE: This brake line flaring tool swivel-type swaging adapters and flaring cones are made of the sturdiest steel materials and....
  • ✅ SATISFACTION GUARANTEED: We stand by the word "quality" we assure you that your purchase of this heavy-duty double brake line flaring tool or....
Check Stock

SANATO 14 Pcs Steel Double Flares Tool Black Adapters,Suit For 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8 OD Tubing Expander Connector

  • 【Various Size】:3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8 OD double flare adapters..
  • 【Premium Quality】: Made of high-quality steel, not easy to deform and damage, fine workmanship, smooth surface without burrs..
  • 【High Efficiency】: The operation is simple, and it can be quickly installed with a flaring tool to improve work efficiency..
  • 【Widely Used】: It is suitable for the connection of various brake circuits, replacement of brake pipelines, fuel pipelines, air conditioning pipelines, etc..
  • 【Package includes】: 14 pcs double flare adapters..
Check Stock

Wostore Double Flare Tool Adapters 7 Pcs 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8 Inch Tube Expander Flaring

  • The kit includes 7 PCS flaring adapters..
  • Flaring tool adapters apply to 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8" O.D.tubing..
  • Designed to use when flaring double flare in copper, aluminum, magnesium,and brass tubing as well as soft steel brake line tubing..
  • Multiple size options,meets almost all your flare needs..
Check Stock

ABN Professional Brake Line Flaring Tool Kit 45 Degrees - Single Bubble Double Flare Tool Kit for Steel Copper Tube

  • [Get a Leakproof Connection]: When building car brake lines, the ABN Professional Brake Flaring Tool Kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises.
  • [Fits Your Application]: 45-degree set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
  • For 3/16-inch (4.75mm), 1/4-inch (6.35mm), 5/16-inch (8mm), and 3/8-inch tubing.
  • [Use Your Vise]: Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under car).
  • 6-inch (15.2 cm) T-handle screw clamp holds die and tube in place so you can create flares quickly and easily.
  • [Durability You Need]: Deburred square pipe end with outer edge chamfered approximately 0.25 x 45 degrees.
  • Each die block is 1.7 inches (4.3 cm) long.
  • Approximate 1.5-inch (3.8 cm) actual clamping surface [we recommend only placing bends in the last 2.5 inches (6.4 cm) of tube after flared].
  • [Package Contents]: Brake line flare kit includes (1) brake line flare tool with T-handle and 11-inch lever with 5-inch texturized rubber sleeve (27.9x12.7 cm), (4) end dies, (1) instruction manual, and (1) 14.1 x 6.1....
Check Stock

Racewill 25 ft 3/16 Copper Coated Brake Line Kit Includes 16 Fittings and 4 Unions Brake Line Fittings + Brake Line Double & Single Flaring Tool Kit

  • MATERIAL：Racewill copper coated steel line is easy to be bent by hand and flare by simple tools.all brake line fittings are made of durable brass to prevent rust and plated for corrosion resistance.
  • UPGRADE TO 20 FITTINGS: ① 2 x 3/16” (7/16-24) Inverted Tube Nut.
  • ② 10 x 3/16" (3/8-24) Inverted Tube Nut.
  • ③ 2 x 3/16” (1/2-20) Inverted Tube Nut.
  • ④ 2 x 3/16"(9/16-18) Inverted Tube Nut.
  • RUST AND CORROSION PROOFING：Our 3/16 Copper coated steel line are the longest lasting brake line and much better than standard steel tubing. Copper coated brake line are ideal for vehicles experiencing harsh weather and environmental conditions.
  • MAKE DOUBLE & SINGLE FLARES: Designed to use when flaring single or double flare in a variety of material: copper, aluminum, brass, magnesium, and soft steel brake line tubing. Flaring tool apply to 1/2", 3/8", 5/16", 1/4", 3/16" O.D. tubing..
  • WIDELY APPLICATION：Brake line and fittings Fits for Most Hydraulic Braking Systems, Fuel Systems, and Transmission Systems,etc. It is also widely fit for household, industrial and commercial uses..
Check Stock