Best Double Head Cutting Saw

DEWALT Miter Saw, Double-Bevel, Compound, 12-Inch, 15-Amp (DWS716)

POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
CROSS CUT CAPACITY up to 2×8-Inch dimensional lumber at 90° and a 2×6-Inch dimensional lumber at 45°.
DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 – 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity. Precise miter system and machined-base fence support optimized cutting accuracy.
LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.

Check Stock

Fine Woodworking Video Workshop Series - Woodturning Basics

【Durable & Flexible Saw Blade】: The hand saw blade is made of SK5 high-carbon steel. The Japanese pull saw teeth are processed by a high-frequency hardening machine imported from Japan, and the hardness can reach HRC60-63 degrees..
【Double Edged】: One side of Japanese hand saw is 17TPI for cutting hardwood, and the other side is 14TPI for cutting softwood..
【Hardened 3-Edge Teeth】: The hand saw has three-sided grinding gear design, sharp edge, faster chip removal, and smoother cutting..
【Comfortable Handle】: Exquisite beech wood handle and slight curve design make the saw handle comfortable to hold, and the operation is more labor-saving..
【Enrich Your Woodworking Life】: Straight shank double-sided small hand saw, small and light, suitable for fine cutting and small parts production, it is the best choice for woodworking DIY..

Check Stock

Woodworking - This is my only Plane T-shirt

【Durable & Flexible Saw Blade】: The hand saw blade is made of SK5 high-carbon steel. The Japanese pull saw teeth are processed by a high-frequency hardening machine imported from Japan, and the hardness can reach HRC60-63 degrees..
【Double Edged】: One side of Japanese hand saw is 17TPI for cutting hardwood, and the other side is 14TPI for cutting softwood..
【Hardened 3-Edge Teeth】: The hand saw has three-sided grinding gear design, sharp edge, faster chip removal, and smoother cutting..
【Comfortable Handle】: Exquisite beech wood handle and slight curve design make the saw handle comfortable to hold, and the operation is more labor-saving..
【Enrich Your Woodworking Life】: Straight shank double-sided small hand saw, small and light, suitable for fine cutting and small parts production, it is the best choice for woodworking DIY..

Check Stock

POOPLE 20FT Telescoping Extension Pole Saws for Tree Trimming | Manual Tree Branches Pruner | Long Extendable High Pole Pruning Saw with Blade | Tree Trimmer with Adjustable Pole (5-20FT)

... can easily pruner high and hard to reach branches on even tall trees, and do it without the hazard of climbing a ladder, You also can trim at ground level without bending or kneeling..
【Steel Pole Saw Blade】: POOPLE Tree trimmer pole saw have 12inch 3X sharpened tooth is made of premium carbon steel with strong cutting ability, lightweight, durable and rust-resistant. Non-stick blade coat prolongs its working life and ensures a smooth cutting and pruning efficient, save your effort and time..
【Multipurpose Extension Pole】: Telescoping pole saw can adjust the smart 4-stage extension pole to any custom length from 5 to 20 foot with the flip-tab lock. Work with standard thread tools, easy to twist on, it performs all the hard to reach tasks typically requiring poles, such as paint roller, squeegee, cobweb duster, ceiling fan duster, feather duster, light bulb changer!.
【Wide Application】: 2-in-1 Tree saw with pole(5 to 20 foot), practical and multifunctional. 19 inch pole saw head replacement can be used as a telescopic pole saw for pruning high limbs or branches or as a hand-held saw for pruning and grooming lower branches, brush, and logs..
【100% Customer Satisfaction】: We feel confident that you will love POOPLE POLE PRUNER SAW. If there....

Check Stock

POOPLE 12FT Telescoping Extension Pole Saws for Tree Trimming | Manual Tree Branches Pruner | Extendable Limb Saw and Trimmer for Tree Pruning on Branches Less than 2" Diameter (3-12FT)

...u can easily pruner high and hard to reach branches on even tall trees, and do it without the hazard of climbing a ladder, You also can trim at ground level without bending or kneeling..
【Steel Pole Saw Blade】:POOPLE Tree trimmer pole saw have 12inch 3X sharpened tooth is made of premium carbon steel with strong cutting ability, lightweight, durable and rust-resistant. Non-stick blade coat prolongs its working life and ensures a smooth cutting and pruning efficient, save your effort and time..
【Multipurpose Extension Pole】: Telescoping pole saw can adjust the smart 4-stage extension pole to any custom length from 3 to 12 foot with the flip-tab lock. Work with standard thread tools, easy to twist on, it performs all the hard to reach tasks typically requiring poles, such as paint roller, squeegee, cobweb duster, ceiling fan duster, feather duster, light bulb changer!.
【Wide Application】: 2-in-1 Tree saw with pole(3 to 12 foot), practical and multifunctional. 19 inch pole saw head replacement can be used as a telescopic pole saw for pruning high limbs or branches or as a hand-held saw for pruning and grooming lower branches, brush, and logs..
【100% Customer Satisfaction】:We feel confident that you will love POOPLE POLE PRUNER SAW. If there'....

Check Stock

Woodworking: The Right Technique : Three Practical Ways to Do Every Job-And How to Choose the One That's Right for You

【Durable & Flexible Saw Blade】: The hand saw blade is made of SK5 high-carbon steel. The Japanese pull saw teeth are processed by a high-frequency hardening machine imported from Japan, and the hardness can reach HRC60-63 degrees..
【Double Edged】: One side of Japanese hand saw is 17TPI for cutting hardwood, and the other side is 14TPI for cutting softwood..
【Hardened 3-Edge Teeth】: The hand saw has three-sided grinding gear design, sharp edge, faster chip removal, and smoother cutting..
【Comfortable Handle】: Exquisite beech wood handle and slight curve design make the saw handle comfortable to hold, and the operation is more labor-saving..
【Enrich Your Woodworking Life】: Straight shank double-sided small hand saw, small and light, suitable for fine cutting and small parts production, it is the best choice for woodworking DIY..

Check Stock

Goplus Table Saw 10-Inch 15-Amp Portable Table Saw 36T Blade Cutting Speed Up to 5000RPM 45º Double-Bevel Cut Aluminum Table Benchtop Table Saw with Metal Stand Sliding Miter Gauge

【Powerful Cutting Performance】Equipped with high-power 15 Amp motor in low noise, this table saw delivers 5,000 RPM cutting performance to rip through various kind of hardwood with ease. And the heavy-duty table saw stand effectively prevents table from rollover during cutting..
【36 Tooth Blade & Aluminum Tabletop】Coated alumium tabletop with 26" rip capacity can easily rip through larger wood material and reduce extra friction for smoother sliding. Table saw features36T carbide-tipped blade, which is designed with transparent guard and riving knife to protect you from accidental hurt and flying chips..
【Double Bevel Cutting & Adjustable Height】Featuring the double bevel cutting from 0-45°, this table saw provides cross cut at 90°--3" and bevel cut at 45°--2-1/2". And portable table saw has a large hand wheel to control the blade lifting, convenient for different needs, such as slotting, ripping or cutting..
【Miter Gauge & Rip Fence】Sliding miter gauge can be adjusted from -45° to 45° for cross cutting. And self-aligning rip fence with parallel guide on both sides assists the more precise and stable cutting without any wobbling..
【Ergonomic Benchtop Table Saw】On-board storage system is convenient for your wrench and p....

Check Stock

SHALL Fiber Cement Siding Shear 4.8-Amp Hardie Board Cutter with 360 Degree Swivel Head Variable Speed & Continuous Cutting for Cutting Cement Board Tile Board Backer board 2700 SPM

Clean cut: Double cut design for creating a 5/16” curled thin strip during operation by the double-cut blade. Compared with manual saw and grinder....
360 degree swivel head: Cutter head can be adjusted to a desired position for delivering comfortable cuts from any angle or direction. Offer....
Variable speeds: Speed (0-2700 SPM) is allowed to vary by users. Press trigger lightly to cut slowly and press trigger heavily to cut quickly. For....
Cutting capacity: Max cutting capacity is 5/16” (8 mm) and minimum cutting radius is 10”. In addition, applicable for cutting cement board, hardie....
Continuous cutting: The lock-on button can be used to lock the trigger switch ON at its fastest speed for users to reduce finger fatigue. For....

Check Stock

More Treasures from American Film Archives 1894-1931

...ormance motors, with a maximum speed of 18,000 rpm, the battery has limited power protection. When you cut to a thick object like a stone, the current is too big and it will stop automatically to protect the motor and last longer..
【90°Adjustable Head and Handle】: The cutting head can be adjusted to 5 different angles (0°/22.5°/45°/67.5°/90°). The cutting head can also be rotated 90 degrees clockwise to instantly become a side trimmer, the second bottom handle can be adjusted to work with the top handle to balance the weight, and you can easily move it back and forth. to suit your size and cutting needs..
【Comfortable weed eater battery powered】: As a true lightweight, the grass trimmer is ergonomically designed and, at only 2.1 kg, particularly light, with a telescopic handle, it offers maximum safety and comfortable working regardless of body size, The new grass trimmer is equipped with a sliding support wheel that allows operation with a Hand allows and is more convenient to use. body size offers maximum safety and comfortable working..
【Service and Package Included】Package includes: 1 x Weed Wacker Bat....

Check Stock

RUITOOL Japanese Hand Saw 6 Inch Double Edge Sided Pull Saw Ryoba SK5 Flexible Blade 14/17 TPI Flush Cut Beech Handle Wood Saw for Woodworking Tools

【Durable & Flexible Saw Blade】: The hand saw blade is made of SK5 high-carbon steel. The Japanese pull saw teeth are processed by a high-frequency hardening machine imported from Japan, and the hardness can reach HRC60-63 degrees..
【Double Edged】: One side of Japanese hand saw is 17TPI for cutting hardwood, and the other side is 14TPI for cutting softwood..
【Hardened 3-Edge Teeth】: The hand saw has three-sided grinding gear design, sharp edge, faster chip removal, and smoother cutting..
【Comfortable Handle】: Exquisite beech wood handle and slight curve design make the saw handle comfortable to hold, and the operation is more labor-saving..
【Enrich Your Woodworking Life】: Straight shank double-sided small hand saw, small and light, suitable for fine cutting and small parts production, it is the best choice for woodworking DIY..

Check Stock

Japanese Pull Saw Professional Ryoba Saw 10 Inch Double Edge Flush Cut Hand Saw with Portable Bag for Woodworking

...n weight, requires less power, and the resulting edge is cleaner.
[10 Inch Ryoba Double Edge] - The double sided general purpose carpenter's saw has impulse hardened teeth on both edges of the blade.
The 18 TPI triple-cut coarse teeth for ripping and the other side 6TPI to 10TPI fine teeth for highly precision crosscutting. The length of the blade makes for long pull strokes and therefore fast cutting — cross cut a 2 x 4 in 30 seconds! It enables you to make a wider variety of woodworking products.
[Super-thin Replaceable Blade] - The 0.023 inch thick, 10 inch long blade consisted of top quality japanese steel gives a fine kerf, handling size for highly precision work and provides accurate cuts with much less effort. Plastic head thumb screw makes it release or install the saw blade easily.
[Ergonomics TPR handle] - The ergonomic handles are wrapped with Thermal Plastic Rubber for a secure grip. After working for a long time, it can still make your hands feel comfortable.
[The Organized Saw Bag] - A portable bag for protecting, storaging, carrying and organizing your pull saw. Maintain your pull saw blades With the bonus teeth brushes..

Check Stock

Nightcore Table Saw, 10-Inch 15-Amp Portable Multifunctional Saw w/36T Blade, 5000RPM & 45º Double-Bevel Cut Aluminum Table Saw, Bench Saw with Metal Stand & Sliding Miter Gauge for Woodworking

Remarkable Cutting Performance: This portable table saw features with high-quality 15 Amp motor bout low in noise, which can achieve 5000 RPM cutting performance, easy to cut all kinds of hardwood. Heavy duty table saw frame effectively prevents table from turning over during cutting..
Convenient Bench Table Saw: Our products feature a composite ergonomic design.The on-board storage system to facilitate your wrenches and push rods when not in use. In addition, a safety switch can control the table saw frame and provide overload protection. And 10 inch table saw can be used without bracket, convenient outdoor cutting wood..
Coated Aluminum Table top & Premium Blade: With coated aluminum table top, this table saw can reduce additional friction for smoother sliding., while with 26 "tear capability it can easily tear larger wood materials. The watch saw has a 36T carbide blade and is designed with a transparent protection and tearing knife to protect you from accidental injuries and flying debris..
Height Adjustment & Double Bevel Cut: Featuring a double bevel cut from 0-45°, this portable table saw offers a 90° -3 "and 45° -2-1/2" bevel cut. Moreover, this portable table saw is equipped with large hand wheel to control blade lifting, convenient for slot....

Check Stock

AVID POWER Circular Saw, 15 Amp Corded Circular Saw 7-1/4 Inch Electric Saw for Cutting Wood, Metal and Plastic, Solid Aluminum Base Plate

[Quality Material]: The AVID POWER Electric Circular Saw is made of pure copper with aluminum base plate processed by solid aluminum which provides a stronger, smoother and higher cutting accuracy..
[Versatile Structure]: The circular saw bevel lever allows you to change cutting angle freely from 0° to 45°. Equipped with adjustable cutting depth, the max cutting depth of 1-11/16" at 90° and 1-1/8" at 45° can meet your needs..
[Powerful Features]: This corded saw is built with 15 Amp powerful motor and 7-1/4" x 24T saw blade for better performance and heat dissipation. The cutting speed of this saw is up to 5000 RPM, which provides stronger power for the electric saw and greatly saves work time..
[Ergonomic Design]: The comfortable handle reduces fatigue, provides stronger clamping force, which makes cutting stable. The lock button and switch design double guarantee your safety, prevent the machine from opening accidentally..
[Package Includes]: 1x Circular saw, 1x 24-T Circular saw blade, 1x Cutting guide, 1x Hex key, 1x Instruction manual, and 1x Warranty card..

Check Stock