Categories

Best Double Pump Jack

OEMTOOLS 24836 Hydraulic Floor Jack, 3-1/2 Ton Capacity, Car Jack Hydraulic Lift, Foot Pedal for Quick Vehicle Lift, Rapid Pump Jack, Rear Swivel Casters

  • HIGH-CAPACITY AUTO JACK: This hydraulic car lift is designed to lift 3-1/2 tons with minimal effort.
  • Reliable car floor jack, truck jack, SUV jack, and RV jack.
  • Lift jack not designed to support vehicles.
  • FAST LIFT FUNCTIONALITY: Our quick car jack includes a foot pedal for faster setup.
  • Excellent shop floor jack or garage floor jack for increased productivity.
  • Get to work servicing vehicles much faster with these floor jacks.
  • RAPID PUMP FLOOR JACK: This vehicle jack features a fast action dual pump design for quicker car lifting.
  • Heavy duty car jack makes it easy to lift and service standard vehicles.
  • Get the job done on time with this fast jack.
  • EASY TO MANEUVER: Our automotive floor jack comes with 360 degree rear swivel casters, making it an easy car jack to maneuver from vehicle to vehicle in your shop or garage.
  • PRODUCT SPECIFICATIONS: Weight Capacity: 3-1/2 Tons.
Check Stock

K Tool International 1000 lb. Single Stage Transmission Jack 71 Inch Range Double Speed Pump Foot Pedal Activation .5 ton Capacity; KTI63502A

  • [SINGLE STAGE TRANSMISSION JACK] - Foot pedal easily raises single ram under load and provides safe and controlled lowering of load.
  • [LIFT RANGE] - 43.625 inch - 71inch Extended to reach a maximum height of 71 inches.
  • [SPEED] - Double speed pump gets to the load much faster than standard pumps.
  • [WEIGHT CAPACITY] - Single stage transmission jack with 1000 pounds capacity (1/2 TON).
  • [SAFETY] - The 123 lb Single Stage Jack provides extra stability for your transmission lift.
Check Stock

K Tool International 50 Ton Blue Air Hydraulic Truck Jack HD KTI63198

  • [50-TON CAPACITY] - K tool International service jack rated to lift up to 50 tons or 100,000 lbs..
  • [LIFTING RANGE] - K Tool 50 ton jack has a lifting range from 11.4" to 21.25". Service Jack provides the opportunity for many automotive/truck needs..
  • [BUILT-IN BY-PASS] - K Tool truck jack includes a built-in by -pass device to protect hydraulic system from over pumping damage..
  • [LONG PUMP HANDLE] - Long pump handle with release knob. Works independently of handle position. Handle locks in both vertically at 45 degree angle and horizontally..
  • [NARROW WIDTH] - Truck jack narrow width allows jack to fit between tandem wheels..
Check Stock

BIG RED T30808 Torin Hydraulic Long Ram Jack with Double Piston Pump and Clevis Base (Fits: Garage/Shop Cranes, Engine Hoists, and More): 8 Ton (16,000 lb) Capacity, Red

  • Hydraulic long ram jack has a double piston pump and clevis base designed for residential and commercial use.
  • Features a lifting range from 24-13/16" to 44-1/8" with a 8 ton (16,000 lb) load capacity.
  • Clevis style base provides added versatility.
  • Long ram jack is constructed of heavy-duty steel with a heat-treated chrome cylinder for added strength.
  • Fits most garage/shop cranes, engine hoists, and more.
  • Glide-action pressure pump is designed to lift with minimal effort.
  • Integrated built-in oil-bypass and overload valve that protects the hydraulic system from extending beyond limits.
Check Stock

Heavy duty 3 Ton Floor Jack Low Profile Hydraulic Jack Steel Service Jack Quick Rise With Double Pump Quick Lift

  • 3-Ton jack with Heavy-duty steel construction provides stability and endurance. Saddle lifts: 5-1/4'' to 18-1/4'' (133mm to 465mm).
  • Bullt-in safety valve protects against jack over-loading Complete with long two piece handle for ease of operation and reduced operator fatigue..
  • Swivel saddle and rear casters for floor jacks providesmooth maneuvering and positioning. “Quick Start” double pump technology for fast operation to contact point..
  • Rubber cushion on the saddle prevents marring of the lift. Cushion on handle prevents damage to the vehicle.
  • Low Profile jack complies with ASME PASE/2014 Safety Standard.
Check Stock

SUNEX 66037 3.5T FLOOR JACK STEEL RAPID RISE

  • Rapid Rise Technology with dual pump pistons raises the saddle to maximum height in only six pump strokes..
  • Overload and bypass safety valves prevent the jack from being used beyond its rated capacity and over extension of the ram..
  • Strong chassis with upper and lower frame flanges to withstand twisting..
  • Wide front wheels and ball bearing mounted rear caster wheels for stability and easy maneuverability..
  • Angular positioned pump pistons provide maximum effective pump stroke when jack is completely under a vehicle..
Check Stock

K Tool International 3.33 Ton Low Profile Service Jack; Dual Pump Piston for Rapid Rise, Long Range Handle, Heavy Duty Steel, Hydraulic Ram Protection; KTIXD63133

  • [3.33-TON CAPACITY] - K tool International service jack rated to lift up to 3.33 tons or 6,660 lbs..
  • [DURABLE] - K Tool service jack is built for extra lifting and maneuverability for all load lifting needs. Heavy-duty steel construction provides stability and positioning..
  • [LONG PUMP HANDLE]-  50" long pump handle for easy pumping under load.
  • [DUAL PISTONS]- Dual pump piston power unit raises saddle to maximum height in 8 full incremental pump strokes with no load.
  • [BUILT-IN VALVE] - Valve prevents over-extension of hydraulic ram and jack use beyond rate capacity and over extension of ram.
Check Stock

US JACK D-51126 20 Ton Bottle Jack Made In USA

  • OTC's 8-Ton Bottle Jack features a rugged forged cylinder and base to ensure strength and prevent leaks, along with a chromed pump piston and ram for additional rust resistance.
  • In-line design (pump mechanism centered on the cylinder) makes the jack much easier operate and manuever into position with the handle compared to offset designs.
  • Specifications include: 4-15/16 inch long stroke, 7-13/16 inch minimum retracted height, 15-3/4 inch maximum height with screw extension, 3 inch long screw extension.
  • 1-3/8 inch diameter saddle, 3-9/16 inch x 6 inch rectangular base.
  • OTC bottle jacks will provide years of reliable service, but eventally time and use will require new seals so every OTC bottle jack includes a free, life extending, seal kit.
Check Stock

BAOSHISHAN Low Profile Bottle Jack 10 Ton Double Ram Jack 4-7/8’’ to 8-7/8’’ Lifting Range Hydraulic Jack Stubby Short Bottle Jack

  • [IDEAL FOR LOW GROUND CLEARANCE]- The 4-7/8" starting height allows shorty bottle jack to fit most low ground car clearance, and it has a double ram design. The car jacks fully extend up to 8-7/8" on the basis of constant capacity..
  • [STURDY STRUCTURE]- The compact bottle jack is designed with high-quality heavy duty alloy steel structure to ensure quality and durability. The pressure pump is designed to lift with minimal effort..
  • [APPLICATION]- Ideal for automotive and agriculture repair shops, loading docks, garages, warehouses, and factory floors. Also this is a heavy duty jack to help level heavy equipment..
  • [WARRANTY]- BAOSHISHAN provides a one-year warranty. If there is any oil leakage, damage or malfunction of the sturdy bottle jack, please do not hesitate to contact the after-sales service to replace it..
  • [PARAMETER]- Rated capacity: 10 ton (20,000 lbs) | Max height: 225mm/8.86" | Min height: 125mm/4.92" | Lifting height: 100mm/3.94" | Net Weight: 7.7kg/16.98lbs.
Check Stock

ROGTZ Electric Car Jack 5 Ton 12V Hydraulic Car Jack with Tire Inflator Pump and LED Light, Electric Car Jack Lift Floor Jack for SUV Sedans Tire Change (Red)

  • WEIGHT CAPACITY-5.0T/11100LB: Working Capacity can reach up to 5.0T(11100lb)as a car jack. With 12V vehicle power outlet, low pressure rod, set for the sports car. Equipped with double motor driver inside, it works independently and effectively.
  • LIFT RANGE: This car jack electric lifts between 5.9 and 17.7 inches, and it will automatically stop working when reaching height limit. At the same time, you can also raise it just enough to change a flat tire and be on your way.
  • MULTIFUNCTION : It is able to function as a car jack, an air pump and a LED flashlight.So it can meet multiple demands. The panel is easy to understand and operate. With the simple button, the electric jack jack can automatically rise and fall, and the pressure gauge is convenient for viewing the inflation pressure.
  • COMPLETE ACCESSORY KIT: Including electric car jack.
  • User Manual, etc. Very portable and easy to use. Choose an appropriate position for the electric jack, where the car body can provide a good support. Do not approach when the electric car jack is....
Check Stock

ROGTZ Electric Car Jack with Tire Inflatable Pump, 5 Ton 12V Car Jack Hydraulic Jack for SUV Sedans, Electric Car Lift Floor Jack for Tire Change with LED Light (Black)

  • WEIGHT CAPACITY-5.0T/11100LB: Working Capacity can reach up to 5.0T(11100lb)as a car jack. With 12V vehicle power outlet, low pressure rod, set for the sports car. Equipped with double motor driver inside, it works independently and effectively.
  • LIFTING RANGE: 6.1~17.7 inch: Lifting height range is from 6.1~17.7 inch. Lift the car in less than a minute by the electric car jack, change a tire quickly. Non-slip cross groove design. Freely adjustable height.
  • MULTIFUNCTION : It is able to function as a car jack, an air pump and a LED flashlight.So it can meet multiple demands. The panel is easy to understand and operate. With the simple button, the electric jack jack can automatically rise and fall, and the pressure gauge is convenient for viewing the inflation pressure.
  • COMPLETE ACCESSORY KIT: Including electric car jack.
  • User Manual, etc. Very portable and easy to use. Choose an appropriate position for the electric jack, where the car body can provide a good support. Do not approach when the electric car jack is working.
  • SAFE : The electric car jack must be used on a flat and firm ground, never to use it on a sloped ground! If there is any problem when using ....
Check Stock

VEVOR 1.5 Ton/3300 LBS Low Profile Aluminum and Steel Racing Floor Jack with Dual Pistons Quick Lift Pump, Floor Jack Lifting Range 3-3/20"-14-10/27"

  • 3-Ton jack with Heavy-duty steel construction provides stability and endurance. Saddle lifts: 5-1/4'' to 18-1/4'' (133mm to 465mm).
  • Bullt-in safety valve protects against jack over-loading Complete with long two piece handle for ease of operation and reduced operator fatigue..
  • Swivel saddle and rear casters for floor jacks providesmooth maneuvering and positioning. “Quick Start” double pump technology for fast operation to contact point..
  • Rubber cushion on the saddle prevents marring of the lift. Cushion on handle prevents damage to the vehicle.
  • Low Profile jack complies with ASME PASE/2014 Safety Standard.
Check Stock

K Tool International 1,000 lb (1/2 TON) Telescopic Transmission Jack, Two Stage (XD); Heavy Duty 2 Stage, Lifting Range 35\ to 74.2\

  • [2 STAGES] - The 2 Stage Transmission Jack can be lowered through its second stage which is a much lower height than the lowest height of the single stage transmission jack. The lower position of the two stage jack allows the operator to safely roll the transmission throughout the shop when mounted on the transmission jack.
  • [HANDS FREE] - Foot pump and release pedals provide hands free operation to align saddle with transmission.
  • [QUICK USE] - Speedy pump foot pedal raises telescopic rams to load quickly.
  • [OVERLOAD PREVENTION] - Built-in safety valve protects against jack over-loading.
  • [WARRANTY] - Covered by a 2 year warranty and complies with ASME PASE/2014 Safety Standards.
Check Stock