Categories

Best Double Screw Extruder

Haldis 3D Dual Drive Gear Extruder for 3D Printer MK8 V6 CR10 1.75mm TPU/TPE Flexible Filament Without Motor (DDB Left)

  • 1.【Transparent Design】: Transparent and cool design, double gear extruder, when working, you can watch the printing filament go through to see how it works. The transparent case is very practical and looks beautiful..
  • 2.【Dual Gear Extrusion】: Two stainless steel wheels grab the filament from both sides, high extrusion force, ensure smooth feeding and provide fast retraction, after a lot of trial and error improvements, we successfully improved the gear bite problem, improved The durability and reliability of the gears reduce the consumption of our gears and extend their service life..
  • 3.【Adjustable Pressure Spring】: Easily adjust the clamping force of the filament, improved adjustment thumb screw, more comfortable adjustment and more convenient to use..
  • 4.【High Quality Material】: Transparent hard plastic shell and high quality metal extrusion wheel parts, the transparent material looks very beautiful and beautiful. Lightweight: only 70 grams. It reduces the stress on the printer and is extremely easy to assemble..
  • 5.【Widely Compatible】: Compatible with most DIY ....
Check Stock

Redrex Dual Gear Extruder Metal Drive Feeder Upgrade Kit for Creality Ender 3 V2 Ender 3 Pro CR10 Series 3D Printer TPU Filament Supported

  • 【Double Gear Extrusion Mechanism】:The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in....
  • 【Upgraded Idler Gear Design】This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the....
  • 【Spring Adjustable Extruder】The extrusion spring tension could be adjusted by tighten the screw,which greatly improves the printing accuracy and....
  • 【Application】:This all metal dual drive extruder is compatible with Ender 3 V2,Ender 3 Pro,Ender 3,Ender 5 Pro,CR10 S series 3D printer..
  • 【Kindly Reminder】:Please calibrate the E-steps from 100 to 139..
Check Stock

Creality Official Ender 3 Aluminum Extruder 3D Printer Ender 3 Extruder CR-10 Extruder Upgrade MK8 Drive Feed Bowden Extruders for Ender 3 Series Creality CR-10 Series Ender 5 Series

  • UPGRADE: Right hand extruder kit - Perfect replacement for Creality 3D Printers ENDER3, ENDER5, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S,....
  • STABLE and DURABLE: Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hotend include all the necessary screws....
  • EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new "Metal Extruder" and ready to start printing. Used....
  • ADVANTAGES: The advantages of our extruder drive is you have better stronger pressure pushing the filament into the printer nozzle and so will improve....
  • Trusted Vendor: CHPOWER is a TRUSTED VENDOR. Buy with confidence..
Check Stock

CREALITY Official Extruder for Ender 3 3D Printer Aluminum Drive Feed Bowden Extruders Upgrade Accessories Kit for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender-5 Series and CR-10 Series

  • Upgrade Material - High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term use..
  • Stable and Durable-Full metal aluminum alloy, DIY kit and need to assemble. Metal material extruder kit is more stable and durable than the original plastic one while working..
  • Easy to Install - All you do is unbolt the old original plastic extruder and screw in the new " Red Metal Extruder ", then it is ready to print. Suitable for 1.75mm filament 3D printer MK8 bowden extruder frame..
  • Wide Compatibility - Red extruder is suitable for Creality 3d printers accessories: Ender 3, Ender 3 V2, Ender 3 Pro, Ender-3 Max, Ender 5 / 5 Plus / 5 Pro, CR-10S, CR-10, CR 10 mini, CR-10 S5, CR-10 S4, CR 20, CR-20 Pro, CR-X..
  • Creality Official Sales: All products are officially sold, genuine and high-quality, please rest assured to buy. All the necessary accessories are included in the package..
Check Stock

Creality Upgraded MK-8 Metal Feeder Extruder Frame Aluminum Gray Bowden Extruder Drive for Creality Ender 3/3 Pro/3V2/5/5 Plus, CR-10 Series, CR -10S/20/20 Pro 3D Printer

  • WIDE APPLICATION: The extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware. Suitable for Creality 3D Printers Ender 3/3 Pro, Ender 3 V2, Ender 3 Max, Ender 5/5 Plus/5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR-10 S5, CR-10S, CR-10 Plus, CR-X, CR 20/20 Pro..
  • ADVANTAGES: Pushing the filament into the printer nozzle with more pressure to improve the performance of the printer. The bolt of our extruder kits is adjustable so that you can adjust the pressure of the extruder gear as needed..
  • EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. This extruder DIY kit comes with an instruction on how to put it together, which makes it easier to install. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame..
  • STABLE: All-metal aluminum alloy, DIY aluminum block and you need to be assembled by yourself. Giving a much smoother travel and print quality. Fits a 1.75mm filament..
  • CUSTOMER SUPPORT - If you have any problems with our product, please feel free to contact us. We will respond within 24 hours and offer professional technical support to you..
Check Stock

5Aplusreprap Upgraded Dual Gear Extruder Single Connector for Creality Ender 3 CR10 / Pro CR-10S 3D Printer 1.75mm Filament (2 x Extra Gears), Right Hand

  • Package Include: Single connector upgraded dual gear extruder right-handed 1 Set - extruder aluminum block DIY kit with 4pcs quality stainless steel gears.
  • Main Material Instruction: Material for extruder: Aluminum Alloy . Material for the gear in extruder kit : Stainless Steel. For filament: 1.75mm.
  • Advantages: This is an upgraded version of CR10 extruder. A newly added extrusion wheel makes the filament feed more stable. The design of the double-concave gear also reduces the embossing of the consumables by the extrusion wheel..
  • Features: The mould steel spring is very rigid, strong in pressure and very durable..
  • Tips: For most Ender/CR Series 3D Printers, please choose the right-handed extruder..
Check Stock

Sovol SV01 Upgraded 3D Printer 95% Pre-Assembled with Direct Drive Extruder Meanwell Power Supply Glass Plate & Built-in Thermal Runaway Protection 280x240x300mm

  • ★ Direct Drive Extruder ★: Sovol SV01 features with direct drive extruder and dual Z lead screw, greatly increase its printing stability and....
  • ★ Meanwell Power Supply ★: Built-in branded Meanwell power supply ensures stable and sufficient power, heat up the hotbed and nozzle fast.....
  • ★ Removable Glass Plate ★: This 3D printer comes with a flat glass plate on the regular heated bed, greatly resolving warped bed issues. No matter....
  • ★ Semi-Assembled Kits ★: Sovol Direct Drive Extruder 3D Printer comes with several partially assembled kits, just only take you at most 30 minutes....
  • ★ Sovol Support ★: All of our products are shipped to the consumer directly from the manufacturer, we provide lifetime technical assistance.....
Check Stock

Artillery Sidewinder X2 3D Printer, SW-X2 FDM 3D Printers Newest Model Auto Leveling, 32-Bit Silent Motherboard 95% Pre-Assembled Resume Printing Function Build Volume 300x300x400mm

  • [Direct Drive Extruder] The advanced Titan extruder solves most of the problems of filament clogging and uneven extrusion, and achieves high-precision printing. And the maximum printing speed of 150 mm/s realizes high-efficiency printing..
  • [Dual Z-Axis Synchronization System] Dual Z-axis design, double screw drive, makes sure the X-Axis always move parallel to the lattice glass build platform and improves the printing quality..
  • [Automatic Leveling] The Artillery Sidewinder sw-x2 3d printer adopts an intelligent auto bed leveling design, it can automatically adjust the hot bed before printing. And the hot bed can be heated to 110°C within 2 minutes..
  • [Resume Printing Function] The Sidewinder x2 has the function of detecting the exhaustion of filament or power failure, and continuing to print from the position where printing stopped last time after recovery..
  • [Ultra-Silent Printing] 32-bit silent motherboard and exclusive ultra-quiet stepper driver effectively reduce working noise and achieve low-decibel printing mode. Even when the machine works during night, it will not affec....
Check Stock

Bigtreetech 3D Printer Upgrade Dual Gear Extruder MK8 extruder Dual Driver Feed Metal Feeder extruder kit CR-10S Pro/CR-10/ Ender 3 V2/Ender3/Ender 3 pro 1.75mm Filament

  • ❤【UPGRADE DAUL GEARS】Double-gear and double-pneumatic joint extrusion structure, direct drive extruder, high extrusion force, enhancing the feed....
  • ❤【COMPATIBILITY】Double gear mk8 extruder，Perfect replacement for 3D Printers CR-10/ CR-10S/ CR-10S Pro/ Ender 3（initial version）/Ender 3....
  • ❤【STABLE AND DURABLE】All-metal aluminum alloy, High quality dual gear extrusion, Compare to the normal plastic drive, this high aluminum metal....
  • ❤【IMPORTED MATERIAL】The dual gear extruder material adopts brand-new imported aviation aluminum material, and is processed by CNC imported from....
  • ❤【24 months Longer warranty 】We will provide a long-term warranty service of up to 24 months. We will respond promptly within 12 hours in one....
Check Stock

FLASHFORGE Creator Pro 2 3D Printer Independent Dual Extruder, Dual Color Printing, Open 3D Slicer Support with 2 Spools Filament, Work with PLA, ABS, PVA, PETG Filament, Build Volume 200*148*150mm

  • ✨INDEPENDENT DUAL EXTRUDERS - Dual extruder 3D printer Creator Pro 2 realizes Double productivity & Dual filament printing. 4 print modes, Mirror, Duplicate, Dual Filament and Dual-color modes. 2 nozzles work simultaneously and independently to achieve double productivity..
  • ✨HEATING BED - Rapid steady heating prevent model warping much easier to take down models. It supports various types of filament ABS, PLA, PVA, HIPS, creating more realistic models!.
  • ✨REMOVABLE COVER - Creator Pro 2 dual extruder 3d printer lets you adjust chamber temperature at ease. Simply remove its cover when printing PLA filament, as high environment temperature may cause nozzle clog. When print ABS filament, please close the chamber for better quality..
  • ✨RESIDUE SCRAPING DESIGN - After printing, the print head moves to the residue scraping board edge to scrape any residual material on the nozzle. This design of dual extruder 3D printer Creator Pro 2 helps avoid misalignments in the colors, get cleaner dual prints..
  • ✨WIDE RANGE OF APPLICATIONS - Perfect for small workshop's production dem....
Check Stock

Creality Upgrade 3D Printer Kit with All Metal MK-8 Extruder 4 PCS Red Hand Twist Leveling Nuts and 4 PCS Bed-Level Springs 0.04 mm Printer Nozzles for Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5

  • ❤【UPGRADE DAUL GEARS】Double-gear and double-pneumatic joint extrusion structure, direct drive extruder, high extrusion force, enhancing the feed....
  • ❤【COMPATIBILITY】Double gear mk8 extruder，Perfect replacement for 3D Printers CR-10/ CR-10S/ CR-10S Pro/ Ender 3（initial version）/Ender 3....
  • ❤【STABLE AND DURABLE】All-metal aluminum alloy, High quality dual gear extrusion, Compare to the normal plastic drive, this high aluminum metal....
  • ❤【IMPORTED MATERIAL】The dual gear extruder material adopts brand-new imported aviation aluminum material, and is processed by CNC imported from....
  • ❤【24 months Longer warranty 】We will provide a long-term warranty service of up to 24 months. We will respond promptly within 12 hours in one....
Check Stock

Official Creality Sprite Direct Drive Extruder Pro Kit with 80N Stepper Motor Direct Drive Upgrade Kit for Ender 3 Ender3v2 Ender 3 pro Ender 3 Max Support 1.75MM Filament

  • Compatible With Ender3 Series - Creality Spirit direct drive extruder upgrade kit compatible with Ender 3, Ender3v2, Ender 3 pro and Ender 3 Max..
  • All Metal Design - With Compact and light weight design, 54x50x64.3mm small size, 288g weight. Creality Spirit direct drive extruder pro kit perfectly....
  • Large Torque, Extrusion Force Up to 80N - The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extrusion force up to 80N....
  • Dual Gear Feeding, More Stable Printing -The Creality Sprite direct drive extruder adapt double-toothed structure which does not damage filaments,....
  • Support Printing Flexible and High Temperature Filament - With direct drive extruder and up to 300°C all metal hotend kit, the Spirit direct drive....
Check Stock

Creality Sprite Direct Drive Extruder Kit for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 S1/Ender 3 Max/CR-10 Smart Pro 3D Printers

  • Compatible： Creality Sprite direct drive extruder upgrade kit compatible with Ender 3, Ender3v2, Ender 3 pro and Ender 3 Max..
  • Double gear feeding, stable and reliable： The double tooth structure makes the feeding is more reliable and stable. Reduces the chance of clogged nozzles when retracting consumables and failures when loading new consumables. Full metal hot end kit with heating block, titanium throat and cooling block, allowing you to print high temperature materials up to 300°C.
  • Large Torque, Extrusion Force Up to 80N - The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extrusion force up to 80N (depending on filaments). More precise control of feeding withdrawal..
  • Support Printing Flexible and High Temperature Filament ： With direct drive extruder and up to 300°C all metal hotend kit, the Spirit direct drive extruder upgrade kit supports 1.75 MM filaments, including PLA, TPU, PETG, ABS, PA, PC etc..
  • After-sales Service： Life-time professional technical supports, If you encounter unsolvable problems during installation and use, please f....
Check Stock