Best Double Sheave Rope Block

Pulley Block Twin Sheave Block and Tackle 2/5-1/2Inch 150Ft with Braid Rope 30-35KN 6600-7705LBS Capacity Easy Lifting Double Pulley Rigging Rope Great for Construction Work Moving Climbing

  • 【High Quality】 : Double Pulley Rigging Rope system is made of high-quality stainless steel and sturdy nylon ropes and can withstand up to 7700 pounds. ​have the following characteristics in terms of design and performance:Safe and reliable, durable, Small size, light weight, easy to carry, Small lever force and high efficiency.
  • 【Product Specification 】: The diameter of our rope:2/5-1/2 Inch-11-12mm, Rope length:150 Feet, Breaking length is up to 7700LBS, Weight:13.5 lbs, which can meet your different needs to a large extent..
  • 【Easy to Operate】:because the side panel can rotate and swing , it is easy to install and removel , Don't need to thread rope from end to end, much facilitate the set-up progress of system, saves you the time of installing and disassembling the rope..
  • 【Widely Application】:Double Rescue Tackle Pulley is a perfect choice for for rock mountain rescue, tower work, ski patrol or whatever requires block and tackle system, it is suitable for climbing, downhill, training, and other high-altitude work..
  • 【Satisfaction Guarantee】:We feel confident....
Check Stock

Omni Rigging Block Swivel 2.6\ Material Handling Pulley Loss Proof ASME Certified

  • WLL: 4,500 lbf, Block Sheave Diameter: 2.6”.
Check Stock

VEVOR 2ton Snatch Block with Chain 4400 lbs Capacity Snatch Rigging Block 3 Single Sheave Block w/Swivel Hook G70 Chain Fit 3/8 Wire Cable Heavy Duty for Pulling Wrecker Roll Back Recovery

  • 4400 LBS loading Capacity: The working load capacity is up to 4400 lbs, able to lift and tow heavy loads. 3'' sheave size, fitting for 3/8" wire cable. 10'' x 3'' in dimension is compact for easy storage. Chain Size: 31.5 inch * 5/16 inch..
  • Steel Frame with Chain: Built by heavy-duty steel with a powder-coated finish, our snatch block pulley system has better immunity to corrosion and rust. Also, our high-strength G70 chain with grab hook won’t wear out from rust over time..
  • 3-Inch Single Sheave: Smooth single sheave protects the rope from damaging and saves more effort. It is possible to remove one side by taking the pin off, slip in the winch cable, and change your pulling direction to pull a vehicle out of an awkward place..
  • 360° Rotation: Adopt a one-piece casting process.
  • the cable pulley block features the swivel shackle for great convenience and enhanced security. The built-in security device avoids accidental falling..
  • Wide Application: Our snatch block pulley is widely used to do the lifting, towing, recovery, and rigging jobs outdoor and indoor, ideal for factories, warehouses, garages, shipbuilding, engineering machinery, etc..
Check Stock

GM CLIMBING 32kN UIAA Certified Large Rescue Pulley Single/Double Sheave with Swing Plate CE/UIAA (Black)

  • Quality-manufactured pulley for mountain rescue, tower work, ski patrol or whatever requires block and tackle system..
  • Sheave of 2.24 inches Dia, pulley with large sheave is much better and easier for hauling big load..
  • Mounted with ball bearing for higher efficiency and smoothness! Swing side for easy and rapid rope installation and removal!.
  • CE / UIAA Certification! Rating to 32kN / 7100lbs for high durability to satisfy all your requirements, like pulling a stranded boat, hauling some out of a crevasse, etc..
  • Compatible with wide range of ropes, up to 16mm (5/8")! Multiple anchors for complex rescue / hauling system setup!.
Check Stock

GM CLIMBING 40kN Micro Double Pulley Prusik Minding Ball Bearing UIAA CE for Progress Capture System Rigging Hauling Rescue Arborist Tree Climbing

  • 40kN Micro Double Pulley with Swing Plates from GM CLIMBING for you to easily set up most pulley systems while largely lighten your rack. Light, compact, and durable, compatible with rope up to 12mm, CE and UIAA certified. Super power double pulley for you in a wide variety of applications, like general rigging, hauling, dragging system, rescue, tree climbing, mountaineering, etc..
  • Easier rope installation and removal due to swing side plates. You don't have to thread rope from end to end, much facilitate the set-up progress of system. Prusik minding plates and sheaves efficiently tend prusik of progress capture system..
  • The closing style of connecting point qualifies the pulley to be compatible with most kinds of carabiners. Large connecting space, enough for 2 carabiners attachment. Bottom becket creates additional attachment point, simplifying the whole system..
  • Adoption of ball bearing sheave assures a nicely smooth rotation as well as keep up to its maximum efficiency..
  • Certified and conforming to CE EN 12278 (for pulley), Rating to 40kN=2 x (10kN+10kN) breaking strength. 36mm / 1.41in sheave diameter, provides high pulley efficiency for all you need for a pulley, no matter in arborist applications, or pulling a stranded boat, hauling some out of a ....
Check Stock

GM CLIMBING 40kN Micro Double Pulley Prusik Minding Ball Bearing UIAA CE for Progress Capture System Rigging Hauling Rescue Arborist Tree Climbing (Pack of 2)

  • 40kN Micro Double Pulley with Swing Plates from GM CLIMBING for you to easily set up most pulley systems while largely lighten your rack. Light, compact, and durable, compatible with rope up to 12mm, CE and UIAA certified. Super power double pulley for you in a wide variety of applications, like general rigging, hauling, dragging system, rescue, tree climbing, mountaineering, etc..
  • Easier rope installation and removal due to swing side plates. You don't have to thread rope from end to end, much facilitate the set-up progress of system. Prusik minding plates and sheaves efficiently tend prusik of progress capture system..
  • The closing style of connecting point qualifies the pulley to be compatible with most kinds of carabiners. Large connecting space, enough for 2 carabiners attachment. Bottom becket creates additional attachment point, simplifying the whole system..
  • Adoption of ball bearing sheave assures a nicely smooth rotation as well as keep up to its maximum efficiency..
  • Certified and conforming to CE EN 12278 (for pulley), Rating to 40kN=2 x (10kN+10kN) breaking strength. 36mm....
Check Stock

HI-GEAR Wire Rope Pulley Block 3 Ton 6,600 LBS Working Capacity Swivel Eye Hoist Hook Snatch Block Anodized with Hook Compatible Rope Size Up to 7/16 .

  • ROPE SIZE: The block and tally pulley system is 1.70" (43 mm) of Sheave Diameter. Hook Opening is 3/4'' (19mm). Accepts Cable, Wire and Rope size up to 7/16''..
  • MAXIMUM WEIGHT: 3 Ton (6,600 lbs) Working Load Limit.
  • FUNCTIONALITY: Increase the pulling power of your winch with a swiveling feature from the Snatch block.
  • USES: Heavy Duty All Metal Construction. The small pully system will allow you re-direct the force of your item to mobilize your item in an easy and effortless way..
  • FEATURES: The pully system contains an Anodized Steel Hook, Swivel, Housing & Bushing..
Check Stock

Mytee Products Snatch Block with Hook WLL 2 Ton 3 Sheave 3/8 Inch Wire Rope Wrecker Roll Back Recovery

  • The snatch block is a pulley system with covered and protected yet removable sides..
  • Snatch blocks or pulleys are used to change the direction of the pull to a different angle relative to a fixed point..
Check Stock

Mytee Products Snatch Block with Hook WLL 8 Ton 6 Sheave 3/4 Inch Wire Rope Wrecker Roll Back Recovery

  • The snatch block is a pulley system with covered and protected yet removable sides..
  • Snatch blocks or pulleys are used to change the direction of the pull to a different angle relative to a fixed point..
Check Stock

National Hardware N220-012 3213BC Fixed Single Pulley in Zinc plated

  • Swivel eye has the mobility of 360 degrees allowing for change in direction.
  • Made out of steel making it strong, durable, waterproof, and resistant to temperature changes, corrosion, and rust.
  • Used in both indoor and outdoor applications for tent tightening, rope or industrial lifting, and many other uses.
  • Measurements include sheave height of 1 inch, sheave height of 3/4 inches, and sheave height of 1 1/2 inches.
Check Stock

PETZL - ROLLCLIP A, Pulley-Carabiner, Triact-Lock

  • Facilitates manipulations: - Keylock system prevents any accidental snagging of the carabiner when putting the pulley in place - gate opening on the pulley side facilitates installation of the rope when the pulley is fixed to the anchor - may be used with a CAPTIV positioning bar to favor loading of the carabiner along its major axis and to limit the risk of it flipping - sheave mounted on sealed ball bearings for excellent efficiency.
  • With TRIACT-LOCK locking system: may be used to minimize friction on the work rope while keeping set-ups simple. May also be used to install redirects..
  • H profile of carabiner: - ensures an improved strength-to-weight ratio - protects markings from abrasion.
  • Specifications Material(s): aluminum Min. rope diameter: 7 mm Max. rope diameter: 13 mm Sheave diameter: 18 mm Maximum working load: 2 x 2 = 4 kN Efficiency: 85 % Major axis strength: 20 kN Minor axis strength: 8 kN Open gate strength: 7 kN.
  • Warning: RollClip Triact- Lock can't be used with Ascender (doesn't fit through the holes).
Check Stock

Mytee Products Snatch Block with Hook WLL 4 Ton 4 1/2\ Sheave 1/2 Inch Wire Rope Wrecker Roll Back Recovery

  • The snatch block is a pulley system with covered and protected yet removable sides..
  • Snatch blocks or pulleys are used to change the direction of the pull to a different angle relative to a fixed point..
Check Stock

Hardware Essentials 852494 Double Sheave Fixed Pulley (1-1/2\), Gray

  • Zinc die cast sheave and steel body with zinc finish.
Check Stock