Categories

Best Double end End Mills

LittleMachineShop.com #3 Morse Taper End Mill Holder Set, 5 Piece (1636)

  • Set of five 3 Morse taper end mill holders.
  • Compatible with Mills with 3 Morse Taper Spindle.
Check Stock

LittleMachineShop.com R8 End Mill Holder Set, 5 Piece (1258)

  • Set of five R8 end mill holders from 3/16" to 3/4".
Check Stock

Kodiak Cutting Tools L3-OFFT-21LF USA Made Micrograin Carbide Ball Nose End Mill Set, 4 Flute, 1/8\ to 1/2\ (Pack of 6)

  • Contains Kodiak Cutting Tools brand premium quality USA made ball nose solid carbide end mills.
  • 4 flute ball nose end mills are center cutting and made from premium sub-micrograin carbide.
  • Stub length end mills for extra rigidity.
  • Fitted wood block stand included and each size comes in a marked plastic tube.
  • Contains 1pc of each diameter: 1/8, 3/16, 1/4, 5/16, 3/8 and 1/2.
Check Stock

SpeTool 5Pcs 1/8 inch Aluminum End Mills 2 Flutes CNC Spiral Router Bits Non-Ferrous Metal Upcut 1-1/2 inches Long for Woodworking Cutting

  • 【SPECIFICATIONS】End mills for aluminum with 1/8” shank, 1/8” cutting diameter, 7/16” cutting length and 1-1/2” total length, 2 flutes with flat top, 5 pieces included in the package..
  • 【HIGH PERFOMANCE】These end mills for aluminum are designed for perfect surface finish because of the effective chip removal. With the long service life they are suitable for side milling, end milling, finish machining, etc..
  • 【HIGH PRECISION】High precision grinding and polishing, high resistance to abrasion and temperature resistance, good rigidity, high durability and not easy to break..
  • 【ALUMINUM APPLICATIONS】Best for processing aluminum 6061,7075 etc. Also suitable for non-ferrous metal, plywood, OAK, MDF, and Any Hardwood Working..
  • 【WIDELY USED】These aluminum end mills suit for CNC routers, any brands of plunge routers with 1/8" collet..
Check Stock

SpeTool 1/4 End Mill for Aluminum 3 Flutes CNC Spiral Router Bit for Aluminum Cut Non-Ferrous Metal Upcut 2.5 inches Long 5 Pieces

  • 【SPECIFICATIONS】End mills for aluminum with 1/4” shank, 1/4” cutting diameter, 3/4” cutting length and 2-1/2” total length, 3 flutes with flat top, 5 pieces included in the package..
  • 【HIGH PERFOMANCE】These end mills for aluminum are designed for perfect surface finish because of the effective chip removal. With the long service life they are suitable for side milling, end milling, finish machining, etc..
  • 【HIGH PRECISION】High precision grinding and polishing, high resistance to abrasion and temperature resistance, good rigidity, high durability and not easy to break..
  • 【ALUMINUM APPLICATIONS】Best for processing aluminum 6061,7075 etc. Also suitable for non-ferrous metal, plywood, OAK, MDF, and Any Hardwood Working..
  • 【WIDELY USED】These aluminum end mills suit for CNC routers, and Makita, Bosch, or any brands of plunge routers with 1/4" collet..
Check Stock

SpeTool 1/8 End Mills for Aluminum 3 Flutes CNC Spiral Router Bits for Aluminum Cut Non-Ferrous Metal Upcut 1.5 inches Long 5 Pieces

  • 【SPECIFICATIONS】End mills for aluminum with 1/8” shank, 1/8” cutting diameter, 7/16” cutting length and 1-1/2” total length, 3 flutes with flat top, 5 pieces included in the package..
  • 【HIGH PERFOMANCE】These end mills for aluminum are designed for perfect surface finish because of the effective chip removal. With the long service life they are suitable for side milling, end milling, finish machining, etc..
  • 【HIGH PRECISION】High precision grinding and polishing, high resistance to abrasion and temperature resistance, good rigidity, high durability and not easy to break..
  • 【ALUMINUM APPLICATIONS】Best for processing aluminum 6061,7075 etc. Also suitable for non-ferrous metal, plywood, OAK, MDF, and Any Hardwood Working..
  • 【WIDELY USED】These aluminum end mills suit for CNC routers, and Makita, Bosch, or any brands of plunge routers with 1/8" collet..
Check Stock

YG-1 EH970 Carbide Square Nose End Mill, Long Reach, TIALN Multilayer Finish, Roughing Cut, 45 Deg Helix, 4 Flutes, 2.5\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

  • Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills.
  • Fine-pitch tooth design and tool geometry are suitable for machining steel up to Rockwell hardness C45, stainless steel, titanium alloys, and nickel-based alloys.
  • Long-reach end mills have an extended shank for access to recessed areas of the workpiece.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Check Stock

HHIP 1/2 INCH R8 Shell END Mill Holder (3900-1711)

  • Diameter for Bore in Shell End Mill 1/2".
  • Diameter range of standard end mills is 1-1/4 to 1-1/2"..
Check Stock

HHIP 3600-0056 End Mill Grinding Fixture (Angle) 5C

  • Solid negative ball stops with 15 degrees spacing fast & easy set-ups..
  • Can be used for grinding 2-3-4-6-8 and 12 flute end mills.
  • This fixture takes 5C round collets for grinding end mill 1/16" ~ 1-1/8" .Clearance & relief angels are built into the base.
  • Shell mills can easily be held with Straight Shank arbors.
  • Clearance & relief angels are built into the base.
Check Stock

Niagara Cutter 17005489 Carbide Square Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 4' Overall Length, 0.375' Cutting Diameter, 0.375' Shank Diameter

  • 4 flute design for creating finer finishes and a higher metal removal rate.
  • General purpose end mill for working on all types of materials.
  • Made of extra-fine grade carbide for ultra high transverse rupture strength.
  • Uncoated end mills feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.
Check Stock

Genmitsu 6pcs 3-Flute Square End Mill for Aluminum Applications, Nano Blue Coat CNC Router Bits, High Feed U-Type Design, for Roughing and Finishing, 1/4’’ Shank, SN06A

  • Cut faster thanks to superior Material Removal Rate (MRR) especially when slotting..
  • Applicable Materials: High feed U-type design makes these cutters ideal for working with aluminum and copper alloy.
  • Attain excellent production rates thanks to the strong tooth with double relief angles..
  • Wide Compatibility: Genmitsu SN06A Square End Mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device..
Check Stock

YG-1 E5023 Carbide Square Nose End Mill, Double End, TIALN Multilayer Finish, 30 Deg Helix, 4 Flutes, 2\ Overall Length, 0.140625\ Cutting Diameter, 0.1875\ Shank Diameter

  • Double-end square end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life.
  • Suitable for general-purpose machining on steel, chromium-nickel steel, and malleable cast iron.
  • Stub length increases the strength of the tool, making it less likely to break in the workpiece.
  • Four flutes produce a better finish than fewer flutes.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than uncoated finish, TiN coating, and TiCN coating.
Check Stock

Genmitsu 40pcs End Mills CNC Router Bits, 1/8\ Shank CNC Cutter Milling Carving Bit Set Including 2-Flute Flat Nose & Ball Nose End Mill, Nano Blue Coat & Titanium Coat CNC Bits, MC40A

  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm..
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating..
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized co....
Check Stock