Categories

Best Double end Lag Bolts

The Hillman Group 491358 Hanger Bolt, 1/4-20 X 3-Inch , 2-Pack

  • Hanger bolts ideal for hanging materials from wooden structures, walls, or overhead.
  • Assembly is complete when the lag end is screwed into a pre-drilled hole.
  • Included variants range from 1/4"-20 to 3/8"-16 in coarse thread size.
  • Included variants range from 2" to 4" in length.
  • Stainless steel finish for best-in-class corrosion resistance.
Check Stock

1/4 Hex Lag Bolts 1 1-1/2 2 2-1/2 3 JROUTH 155PCS Black Oxidized Hex Lag Screws Heavy Duty Wood Screws Washers Assortment kit Stainless Steel 18-8 304

  • 【Certified Stainless Steel】Black lag bolts are made from 18-8 (304) stainless steel and coated with black oxide, which is certified, good look, strength and corrosion resistant.These bolts well made and you will keep them for future needs..
  • 【Various Sizes】Lag screws kit includes 5 different most common used sizes: Diameter are all 1/4".
  • Length from 1'' to 3''. Thread Type are all Coarse (standard).
  • Quantity: 155 pieces screws and washers. Refer to Figure 2..
  • 【Project Center】These wood screws assortment kit are excellent for exterior household and industrial applications such as deck buildings, gazebos, trusses and other wood connections.We used these as the fasteners for steel banding trim on a custom barbwe designed and built.Turned out perfectly!.
  • 【Choice for Heavy Duty Applications】These lag bolts are ideal used for securing wood in heavy duty applications that standard wood screws cannot support the load feature deep wood screw coarse threads for superior holding and prevent stripping in the material.
  • Can be applied in even severe environment. Often using with washer which distribute the pressure of the head evenly so that to prevent pull through..
  • 【Guarantee in JROUTH】Our hex lag screws undergo rigorous inspections to ensure they....
Check Stock

Stainless Steel 316 Lag Screws Hex Head Lag Bolts 1/2 x 1-1/2 Qty 250

  • Stainless Steel 316 Lag Screws Hex Head Lag Bolts 1/2".
  • Commonly referred to as a lag screw or lag bolt.
  • Features the sharp cutting threads of a wood screw.
  • Commonly used in heavy duty carpentry applications including lumber framing and anchoring equipment to wood such as machinery and large vices.
  • 316 stainless steel is highly corrosion and rust resistant.
Check Stock

The Hillman Group The Hillman Group 731 Hanger Bolt 1/4 x 2 1/2 In. 20-Pack,Zinc

  • Hanger bolts ideal for hanging materials from wooden structures, walls, or overhead.
  • Assembly is complete when the lag end is screwed into a pre-drilled hole.
  • Included variants range from #10-24 to 3/8"-16 in coarse thread size.
  • Included variants range from 3-1/2" to 6" in length.
  • Zinc finish for improved corrosion resistance.
Check Stock

Loboo Idea Speed Out Screw Extractor Drill Bits Tool Set Broken Damaged Bolt Remover Guide Set Broken Easy Out Fastener Kit (5 Pieces, HSS 4341# Silver)

  • H.S.S 4341 Material: Loboo Idea stripped screw extractor is made of high quality H.S.S 4341 material, has 63-65 HRC hardness which is harder than most of other similar products. Durable and solid, suitable to removes even the most stubborn stripped, damaged, embedded, rusted and painted-over screws and bolts. Best gift for any craftsman..
  • Multi Purpose: 5 different sizes of bits (#0, #1, #2, #3, #4) are included in package of stripped screw remover kit and #0 is a gift provided for extra using. All is for ensuring that the screw extractor kit can meet all of your needs. Great for removing stripped, broken head, rusted, unscrew, free-spinning and deck screws or bolts..
  • Easy to Use: 3 simple steps: 1. Drill out, 2. Flip Bit, 3. Extract. Just no other tools needed but a drill, select a smaller bit than the damage screw, you can easily remove the screw. Note: please make sure to run the drill in reverse during the process..
  • Wide Application: The screw and bolt extractor can work on Allen bolts, Machine Screws, Lag Bolts, Wood Screws, Hex Bolts, Sheet Metal Screws, Rounded Bolts to name a few. Meanwhile, comes with a box which make it so portable for easy carrying..
Check Stock

Heavy Duty Bolts, Concrete Anchors TV Wall Mount Screws Kit for Mounting A TV Into Wood Or Concrete

  • Re-mounting, but lost your old hardware? This kit includes everything you’ll need for wood or concrete installs..
  • Our lag bolts are custom-hardened to prevent snapping or breaking..
  • Note: Concrete anchors are not compatible with wood and drywall.
  • If you have any question? contact us please..
Check Stock

Prime-Line 9049747 Hanger Bolts, 1/4 inch-20 X 2-1/2 inch, Grade 18-8 Stainless Steel, (2-pack)

  • Hanger bolts ideal for hanging materials from wooden structures, walls, or overhead.
  • Assembly is complete when the lag end is screwed into a pre-drilled hole.
  • Included variants range from #10-24 to 3/8"-16 in coarse thread size.
  • Included variants range from 3-1/2" to 6" in length.
  • Zinc finish for improved corrosion resistance.
Check Stock

CONFAST 1/2\ (Inside/Screw 1/2\ - 13) Double Expansion Anchor (20 per Box)

  • Allows for lag screw bolts to be installed into concrete, brick and block.
  • Inserts into a hole by tapping with a hammer until flush.
  • Lag screw expands the lag shield against the walls of the hole.
  • Drill hole with masonry drill bit based on diameter on anchor.
Check Stock

RowithmA Mailbox Flag Front Mount Flag 4\ x 2\ x 0,4\

  • Protect your mailbox from winter weather, vandalism, snow plow damage and other road-side hazards..
  • Durable, double wall, recyclable, maintenance free construction..
  • Address numbers, reflective decals, wood lag bolts, washers and zip ties included..
  • Anchors into the ground with your choice of t-stakes, 2x4s or 4x4s, (not included), for protection in light to heavy duty conditions..
Check Stock

1/2 x 6” 25-Piece Black Lag Bolts Rustproof 4-Layer Ceramic BLAKOTE 2X Protection of Galvanized Lag Screws for Decks Pergolas by Makers Bolt

  • Secure Exterior Structural Wood - Ideal for deck wood, exterior plywood, and other marine grade plywoods, our heavy-duty lag screws make wood-to-wood fastening a breeze. Each pack comes with 25pcs of ½” diameter hex screws..
  • 2x Corrosion Protection - These lag bolts for wood are made of an exterior grade 4-layer black ceramic coating called Blakote. With twice the protection of standard galvanized wood screws, they won’t tarnish after exposure to highly corrosive environments..
  • Better for Outdoor Applications - Our structural screws have a black matte finish. They’re tougher for outdoor wood projects than our black oxide finish..
  • Comes in Different Lengths - Use these construction wood screws on decks, gazebos, trusses, and other wood connections. Our lag bolts are available in 1/2" diameter and in lengths up to 8”..
  • Uniform Heads and Precise Threading - Makers Bolt screw sets are specially manufactured under tight tolerance, ensuring precision and uniformity in production..
Check Stock

How To Build Monkey Bars (On The Cheap)

  • The newest swing set bracket in the easy 1-2-3 A-frame bracket series features a 90 degree angle that allows you to extend any A-frame play set!.
  • Heavy-duty 90 degree swing set bracket features a solid, one-piece design that is open on both ends and Constructed with heavy-duty steel with welded seems for the strongest and Safest construction.
  • Swing set brackets are finished in a power-coated Green color and Eastern Jungle Gym signature yellow tag to ensure 100% Authenticity and our Warranty.
  • this listing is for one bracket with hardware.
  • Mounting hardware is included (16 5/16" x 3" zinc-coated steel lag bolts and 16 washers).
Check Stock

ROHN WM24D Double Wall Mount with 24' Stand Off - Masts 7/8' to 2-3/4' OD

  • HEAVY DUTY DOUBLE 'Y' STYLE BRACKETS. 2 BRACKETS INCLUDED AS SHOWN..
  • GALVANIZED STEEL WALL MOUNT PROVIDES 24" CLEARANCE TO THE WALL..
  • MASTS ARE HELD IN PLACE WITH 2 UNIQUE 'ANTI-TWIST' LOCKING SCREWS.
  • CLAMP ACCEPTS 7/8" TO 2-3/4" OD MAST TUBES..
  • CAN BE USED ON MASONRY, WOOD, METAL, OR OTHER TYPES OF WALLS USING UP TO 1/4" LAG SCREWS OR BOLTS (NOT INCLUDED).
Check Stock

REDCAMP Indoor Hammock Hanging Kit Heavy Duty 304 Stainless Steel Hammock Wall Mount Kit 800 lb Capacity

  • EXPANSION SCREWS: This hammock hanging kit contains 2 expansion bolts and 2 lag screws. Expansion bolts are the best choice for concrete wall, lag....
  • HEAVY DUTY HAMMOCK HANGING HOOKS: the screws and washers are exceedingly heavy and thick, made out of 304 stainless steel and galvanized, support up....
  • PERFECT FOR BOTH INDOOR AND OUTDOOR USE: this set of high quality hammock hooks and carabiners can be adjusted to the ceiling of your garage or room,....
  • EASY AND FAST SET UP: This hammock holder is really easy to install, a spanner and a drill will be completely enough..
  • REDCAMP GUARANTEE: Your 100% satisfaction has always been our top priority. That is why all of our products are backed by our unconditional 365-day....
Check Stock