Categories

Best Double row Cylindrical Bearing

INA SL045018PP Cylindrical Roller Bearing, Double Row, Fixed, Normal Clearance, Open End, Double Sealed, Oil Hole, Metric, 90mm ID, 140mm OD, 67mm Width, 2800rpm Maximum Rotational Speed, 117000lbf Static Load Capacity, 70000lbf Dynamic Load Capacity

  • INA cylindrical roller bearing with an open end ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Double row roller bearing for higher radial loads than single row bearings.
  • Open bearing for lubrication applied in place.
  • Metric unit measurements for industry consistency.
Check Stock

SKF NU 1010 ML - Cylindrical Roller Bearing - Straight Bore, 50 mm ID, 80 mm OD, 16 mm Width, C0 Internal Clearance

  • Bearing steel long life bearing, smooth, low noise..
  • Single row cylindrical roller bearings , please add lubricating oil or grease when using,Straight bore for fitting on a conventional cylindrical shaft.
  • N206M NU206M NJ206M NF206M NUP206M (inner diameter = 30 mm, outer diameter = 62 mm, thickness = 16 mm)..
  • Notice Notice Notice: Because RN206 has no bearing outer ring, so its outer diameter is not 62mm..
  • Notice Notice Notice: Because RNU206 has no bearing inner ring, so its inner diameter is not 30mm..
Check Stock

SKF DK59047 Cylindrical Roller Bearings

  • SKF cylindrical roller bearing with steel cage and removable inner ring suitable for high radial loads.
  • C3 radial clearance is larger than normal allowing for thermal expansion.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
Check Stock

NU311 SNR New Cylindrical Roller Bearing

  • SKF cylindrical roller bearing with polyamide/nylon cage and removable inner ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
  • Polyamide/nylon cage is lightweight and produces less noise and vibration than brass cages.
Check Stock

RNU205E Cylindrical Roller Bearing Harley Davidson 9135 Inner Primary Mainshaft

  • SKF cylindrical roller bearing with steel cage and removable inner ring suitable for high radial loads.
  • Metric unit measurements for industry consistency.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
Check Stock

NU1008 Cylindrical Roller Bearing 40x68x15 Cylindrical Bearings

  • SKF cylindrical roller bearing with polyamide/nylon cage and removable inner ring suitable for high radial loads.
  • Metric unit measurements for industry consistency.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
  • Polyamide/nylon cage is lightweight and produces less noise and vibration than brass cages.
Check Stock

22208-E1-XL-C3 FAG Spherical Roller Bearing 40,00x80,00x23,00mm

  • Double row spherical roller bearing for applications that support radial and oscillating axial loads.
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 200 degrees C/392 degrees F.
  • Straight bore for fitting to a conventional cylindrical shaft.
  • Roller-guided brass cage evenly spaces rollers for reduced friction, vibration, and noise.
  • Open design, circumferential groove and three lubrication holes in the outer ring allow for lubrication in place.
Check Stock

NTN RA1562EBL - Cylindrical Roller Bearing - Straight Bore, 30 mm ID, 70 mm OD, 1.1875 in Width, C0 Internal Clearance

  • INA cylindrical roller bearing with a removable outer ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Single row roller bearing for high radial loads with low friction.
  • Removable outer ring in open bearing allows for lubrication in place.
  • Metric unit measurements for industry consistency.
Check Stock

SKF NUTR 15 A Yoke Type Track Roller, Cylindrical Roller Bearing, Crowned Roller, Unsealed, Metric, 15mm Bore, 35mm OD, 19mm Width

  • Single row cylindrical roller bearing for applications that support high radial loads.
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F.
  • Non-locating bearing (two ribs on the outer ring, none on the inner ring) for allowing outer and inner rings to axially displace relative to each other from the central position.
  • Polyamide cage is lightweight and produces less noise and vibrations than brass cages.
  • Removable inner ring in open bearing allows for lubrication in place.
Check Stock

Rear Axle Bearing Carrier T6 Billet Fits for Honda TRX400EX/ TRX 400 EX/TRX 400 X 1999-2014

  • Application: Suitable for 1999-2008 Honda TRX 400 EX and 2009-2014 Honda TRX 400 X..
  • Function: The rear axle bearing frame is an aftermarket replacement manufactured according to OEM bearing frame specifications..
  • Advantage: Compared with tapered bearings, the double-row bearing in the rear row can realize more flexible chain adjustment and less maintenance..
  • Material: Made of sturdy and light 6061-T6 billet to ensure corrosion resistance and rust resistance to improve durability..
  • Design：Designed with high temperature, tensile spring radial lip grease seals, which can protect the components from external components. The rear double-row bearing frame is equipped with a central grease plug, which can be quickly and easily lubricated without disassembly..
Check Stock

FAG N309E-TVP2-C3 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Outer Ring, High Capacity, C3 Clearance, Metric, 45mm ID, 100mm OD, 25mm Width

  • FAG cylindrical roller bearing with a removable outer ring suitable for high radial loads.
  • C3 radial clearance is larger than normal allowing for thermal expansion.
  • Single row roller bearing for high radial loads with low friction.
  • Removable outer ring in open bearing allows for lubrication in place.
  • Metric unit measurements for industry consistency.
Check Stock

SKF NU 2308 ECML Cylindrical Roller Bearing Single Row Removable Inner Ring Straight Bore High Capacity Normal Clearance Brass Cage Metric 40mm Bore 90mm OD 33mm Width

  • SKF cylindrical roller bearing with brass cage and removable inner ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
  • Brass cage evenly spaces rollers for reduced friction, vibration, and noise.
Check Stock

SKF NU 215 ECM/C3 Cylindrical Roller Bearing, Single Row, Removable Inner Ring, Straight Bore, High Capacity, C3 Clearance, Brass Cage, Metric, 75mm Bore, 130mm OD, 25mm Width

  • SKF cylindrical roller bearing with brass cage and removable inner ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
  • Brass cage evenly spaces rollers for reduced friction, vibration, and noise.
Check Stock