Best Double screw Bolt

Sumnacon 2 Pcs Door Flush Bolt - 8 Inch Concealed Security Door Lock for French Doors,Composite Doors,Wood Doors,Double Doors,Dummy Doors,Brush Stainless Steel Finish

• Flush bolt be used to secure the opening for composite door,French, patio, wood, double or other doors.This great small device features automatic holding spring to provide tension for both retracted and projected positions.It often be installed on inactive leaf of double door opening (top and bottom) to offer safety function..
• Our flush bolts are all machined from solid stainless steel for anti corrosive and rustproof,heavy duty and durable. Installing a flush bolt to make a nice addition to security of your home..
• Size : Length=8″(20cm), Width=0.79″(2cm), Depth = 0.67″(1.7cm).
• The interior part of the flush bolt is reinforced by screws to enhance stability and fluency of the structure. Install on inactive leaf of double door opening..
• Integrated design of the switch is easy for daily use,Say goodbye to the one with “push just ride and slide” type,this lever type with comfortable touching and concealed style will surely offer you enjoyable usage and match your modern decoration..
• Easy to install,comes with rust-proof screws and surface strikes for installation.Constructed from stainless steel,screws will provide extra strength to engage and interlock firmly so as to be immobile..

Deltana 7FBZ5 Zinc 7-Inch Flush Bolt

• 3/4″ x 7″ flush bolt with 1″ bolt extension.
• install on inactive leaf of double door opening.

Deltana 7FBR3 HD Solid Brass 7-Inch Flush Bolt

• 3/4″ x 7-1/16″ flush bolt with 1″ bolt extension.
• install on inactive leaf of double door opening.

Rexka 15 pcs Fender Liner Bumper Cover Splash Shield Wheelhouse Liner Bolt Screw Compatible with GM 11570498 Chevrolet Camaro Colorado Corvette Cruze Equinox Silverado Malibu Traverse Cadillac Buick

• Other Names:Wheelhouse Liner Bolt, Bumper Cover Bolt, Guide Bracket Bolt, Bumper Filler Bolt, Lower Cover Bolt, Flare Retainer, Flare Bolt, Splash Shield Bolt, Upper Cap Bolt, Lower Deflector Bolt, Lower Baffle Bolt, Bumper Cover Upper Bolt, Daytime Run Lamp Bolt, Upper Center Pillar Trim Bolt, Guide Bolt, Lower Grille Upper Bolt, Headlamp Assembly Bolt, Outer Bracket Screw, Reinforcement Bolt, Fog Lamp Assembly Bolt, Inner Grille Bolt, Side Retainer Bolt, Wheelhouse Liner Screw.
• Other Names: Mount Bracket Bolt, Grille Assembly Upper Bolt, Corner Trim Bolt, Windshield Pillar Trim Bolt, Impact Bar Bolt, Bumper Cover Retainer, Side Impact Bag Bolt, Bumper Cover Lower Bolt, Side Cover Bolt, Center Duct Bolt, Lower Bracket Bolt, Tailpipe Extension Bolt, Absorber Bolt, Inlet Duct Bolt, Console Assembly Bolt, Upper Grille Bolt, Step Pad Bolt, Bracket Bolt, Grille Assembly Bolt, Vent Grille Bolt, Lower Absorber Bolt, Lower Support Bolt,Outer Brace Screw, Bumper Cover Screw,.
• Replaces GM 11570498 ,Black Finish 4.2 - 1.41 x 20mm, 7mm Indented Hex Head, Loose Washer.

uxcell M8 x 40mm A2 Stainless Steel Double End Threaded Stud Screw Bolt Pack of 5

CTA Tools 9030 Fluted Screw Extractor Set 5-Piece

• Bolt, Stud or Screw Size: 1/4 to 5/16-Inch and Drill Size: 1/8-Inch.
• Bolt, Stud or Screw Size: 3/8-Inch and Drill Size: 3/16-Inch.
• Bolt, Stud or Screw Size: 7/16-Inch and Drill Size: 15/64-Inch and Pipe Size: 1/8-Inch.
• Bolt, Stud or Screw Size: 1/2 to 9/16-Inch and DrillSize: 5/16-Inch and Pipe Size: 1/4-Inch.
• Bolt, Stud or Screw Size: 5/8-Inch and Drill Size: 3/8-Inch and Pipe Size: 3/8-Inch.

Great Neck BC8 8 Inch Bolt Cutters, Great Neck Bolt Cutters, Steel Bolt Cutter, Miniature Bolt Cutter

• VINYL GRIPS: The vinyl grip handles of these hand bolt cutters secure a firm hold.
• They are also comfortable and will not put strain on your hands, so you can keep using this easy bolt cutter until the job is finished.
• DURABLE: When cutting through rods and other metal, you want something strong and durable.
• This set of bolt cutters is ruggedly built and composed of forged steel.
• This will allow you to complete many tasks without them breaking or becoming dull.
• VERSATILE: This may be a small bolt cutter, but it can do many jobs.
• This handheld bolt cutter is ideal for cutting thin chain links, screws, fencing wire, and brads.
• PROVIDES EXTRA STRENGTH: This 8 inch bolt cutter pivots behind the jaws to create a double or compound pivot.
• The level of the fulcrum on this mini bolt cutter gives you extra strength.
• SPECIFICATIONS: This Great Neck bolt cutter is lightweight.
• The portable bolt cutter only weighs 2.4 ounces, making it easy to carry around to different jobs.

Rexka 15pcs M5 Bumper Cover Fog Lamp Hex Head Screw Bolt 07149123885 for BMW E36 E46 F30 E39 E60

• Other Names: C-pillar Trim Panel Screw, Fog Lamp Bolt, Guide Bolt, Side Support Bolt, High Mount Lamp Bolt, Support Panel Bolt, Fog Lamp Screw, Lower Trim Panel Screw, Upper Guide Bolt, Air Deflector Bolt, Bumper Cover Mount Bolt, Center High Mount Stop Light Bolt, Led Lamp Bolt, Bumper Cover Screw, Sail Panel Bolt.
• Hex Head Screw, M5-2.25 X 17mm, Hex Size:8mm X 8mm, Washer Size: 16mm.
• Fits: BMW: 228i xDrive Gran Coupe, 330e, 330i, 330i xDrive, 430i, 528i, 528i xDrive, 530e, 530e xDrive, 530i, 530i xDrive, 535d, 535d xDrive, 535i, 535i xDrive, 540d xDrive, 540i, 540i xDrive, 550i, 550i xDrive, 640i, 640i Gran Coupe, 640i xDrive, 640i xDrive Gran Coupe, 640i xDrive Gran Turismo, 650i, 650i Gran Coupe, 650i xDrive, 650i xDrive Gran Coupe, 740e xDrive, 740i, 740i xDrive, 750i, 750i xDrive, ActiveHybrid 5, i8, M235i xDrive Gran Coupe, M340i, M340i xDrive, M4, M5, M550i xDrive, M6, M6 Gran Coupe, M760i xDrive, X1, X3, X4, X5, X6, X7.
• Meet or Exceed OEM Specification. Direct Fitment..

Lisle 71500 Exhaust Manifold Template for Dodge

• Tapered Bolts center base plate over bolt holes and slip fit bushing allows you to move from hole to hole without moving base plate..
• The screw Extractor is then used to remove the broken bolt..
• Includes bushing to drill to tap size when Extractor cannot be used..
• Double Sided drill depth gauge to make sure water jacket is not pierced..

Retisee 28 Size 4'' x 20'' Bolt and Nut Identifier Gauge Nut Black Bolt Size and Thread Identifier Thread Pitch Gauge Standard Inch and Centimeter Ruler

• Each size has internal thread for bolts and screws, as well as external thread for nuts and washers.
• The thread gauge is about 4 x 20 inch, which has multiple mounting holes, so you can choose to put it on the workbench, fix it in the toolbox, or install it on the wall.
• Double Scale: the bolt and nut identifier has inch and centimeter scales on the edge, so you can identify the length of nuts, washers, bolts and screws quickly.
• Sturdy and Durable: the bolt identifier is made of 6061 aluminum, quality and accurate.
• It has solid metal plate structure, beautiful hard anodized surface, maximum thread strength, and laser etching marks, which is not easy to fade or get scratched.

Nuk3y Heavy Duty 7-Inch Solid Brass Flush Bolt (Oil Rubbed Bronze)

• INSTALL on inactive leaf or double door opening.
• FINISH available in satin nickel, oil rubbed bronze, chrome, and polished brass.
• OVERALL size 3/4" x 7-1/16" with 1" bolt extension.
• EASY TO INSTALL include strike plate and 4 wooden screws.

Kyuionty Stainless Steel Door Flush Bolt Latch 6 Inch L Type Lever Action Flush Slide Lock Bolt, Black

• Package Content: 1 x Concealed Slide Lock Bolt 6 Inch + 1 x Strike + 4 x Screws. Length: 152mm/ 6". Width: 32mm/ 1.26"..
• Solid Thicken Material: The flush bolt constructed from thicken stainless steel for durable, anti corrosive, rustproof and smooth operation, which can greatly increase the safety of your home..
• Stability & Fluency: The flush slide bolt with spring locking function and use high quality thick material to enhance stability and fluency of the structure..
• Feature: Flush bolt with the function of automatic holding spring to provide holding power in both retracted and extended positions. Hidden flush bolt latch for beautiful appearance, used to secure the opening for French Doors, Composite Doors, Wood Doors, Double Doors, Dummy Doors..
• 100% Satisfaction Guarantee: Our products are backed by quality customer service to ensure that your satisfaction is guaranteed. If for any reason you do not like our products, you can return them unconditionally within 90 days and get a full refund..

Flieeya Polaris RZR 1000 XP & S Drive Clutch Aluminium Alloy Powersports Clutch Compatible with 2014-2020 RZR 1000 XP XP4 & 2016-2019 RZR 1000-S Models, with Weights & Spring

• Go Kart Clutch 3/4 Bore 12T for 35 Chain, Perfect for Go Kart, Minibike and Fun Kart Engine 3/4 Bar.
• Centrifugal Clutch Fits Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, Briggs and Stratton Tecumseh Engines 2-6.5 HP with 3/4” shaft.
• Mini Bike Clutch Fits Any Other Engines with 3/4 Crank Shaft and 3/16” Keyway, Most 5.5 HP Clones, 6.5 HP Clones and 4-7HP Motors in All Brands.
• Double Protection: Predator Engine Go Kart Clutch Bolt,Washer,Screws and Allen Wrench are All Included. Mounts Onto Crankshaft Using Bolt and Washer on the End of the Crankshaft and Using Screws Set for Double Secures Your Clutch to the Engine.
• OEM Replacement Quality: Made of Quality Iron Material, Which is Lightweight, Portable, Sturdy, Durable, Maximum Torque, Wear-resisting and Fast Heat Dissipation.