Categories

Best Down Light Heatsink

NS 100W LED Temporary Work Light,15500 Lumen Daylight White 5000K, IP64 Dust & Waterproof,Stainless Steel Cover for High Bay Construction Jobsite Workshop

  • ...t.The linkable work light can connect with 10 lamps in the meanwhile.On-Off switch and AC100V-277V input voltage range makes it very convenient for daily usage..
  • QUALITY ASSURED- Isolated constant current power supply. Surge Protection. This temporary work light can bear sudden high voltage. SMD LED chips and hollow heatsink for efficient heat dissipation and ensure 50,000 hours lifespan..
  • SUPER BRIGHT- Daylight white 5000K light, With 155 LM/W high efficiency, the 100W led construction work light at high intense brightness level to fulfill commercial and industrial professional lighting needs..
  • WIDE APPLICATIONS- This construction lights can be used for high bay, parking lot, wharf, warehouse, construction job site, factory, workshop, mine and outdoor rainy day, wet location.Best replacement for 400W incandescent and cut down electric bill up to 90%. Full 360°beam to light up every corner..
Check Stock

COB Light Chip, LED Chip Light Source, COB Chip Light Source, 2PCS AC110V 50W High Bright Integrated LED Chip Light Source COB Chips for DIY LED Lamp Lighting Fixtures 6x4cm (Cold White Light 6500K)

  • PREMIUM ALUMINUM BOARD: LED Chip Light Source Made from premium aluminum board, cob chip light is durable and easy to dissipate heat. COB Chips Adopted premium COB chips, cob chip light is of good lighting and color effects..
  • STURDY AND DURABLE: COB Chip Light Source Made of high quality aluminum substrate, this COB light chip is sturdy and durable..
  • WIDE APPLICATION: COB Integrated Light Source Suitable for using in traffic lighting, landscape lighting, advertising lighting, indoor lighting, etc..
  • GOOD PROTECTION: LED lamp beads adopts high-quality aluminum base for easy heat dissipation, good protection of the lamp beads..
  • REMARK: COB Chip must need a heatsink aluminum for cooling, do not light it without heatsink aluminum. Otherwise the chip will Burn..
Check Stock

uxcell DC 9V 5W 50mmx7mm COB LED Strip Light Super Bright Lamp Chip Warm White

  • Luminous Surface: 29mm x 6mm/1.14" x 0.23"(L*W).
  • Note:This LED chip needs a heatsink for cooling before power on,Working temperature should be less than 60 Degrees Celsius / (140 Fahrenheit) with a Heat Sink System. Apply thermal grease evenly on the bottom of the light source and the contact surface of the heatsink when installation..
Check Stock

ATNSINC 4Pack LM2596 DC-DC Buck Converter, Adjustable Step Down Voltage Regulator 3-40V to 1.5-35V High Efficiency Power Supply Volt Reducer Transformer Module

  • The input voltage: DC 3 -40 V (Input voltage must be 1.5 V higher than the output voltage, no boost.).
  • The output voltage: DC 1.5 - 35 V adjustable..
  • The output current: It is recommended to use under 2A, maximum 3A(Additional heatsink is required)..
  • Steps: 1. Plugged into a power supply (3-40v), the power indicator light is lit, the module to work properly. 2. Adjust the blue potentiometer knob (generally booster clockwise, counterclockwise step-down) with a multimeter monitoring the output voltage to the voltage..
  • Package includes:4XLM2596 DC-DC buck converter module（Note：The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down).
Check Stock

Easycargo 124pcs Heatsink Kit 9 Sizes Multicolor Aluminum Copper + 3M 8810 Thermal Conductive Adhesive Tape, Cooler Heat Sink Cooling VRM VRAM CPU GPU Small IC Laptop Raspberry Pi 4 SSD NVMe M.2 PS5

  • Universal Heatsink Assortment Box,124pcs Multicolor in 9 different size + Pre-applied 3M 8810 Thermal Conductive Adhesive Tape..
  • Variety Aluminum and Copper heat sinks for cooling raspberry pi 4, VRM VRAM RAM CPU GPU MOSFET Small IC Chips PC Components Laptop M2 M.2 SSD NVMe PS5.
  • Includes: 8pcs black anodized aluminum heatsink: 0.56 x 0.56 x 0.26 inch (14mm x 14mm x 7mm).
  • 8pcs green anodized aluminum heatsink: 0.56 x 0.56 x 0.30 inch (14mm x 14mm x 8mm).
  • 8pcs silvertone aluminum heatsink: 0.6 x 0.6 x 0.25 inch (15mm x 15mm x 6.5mm).
  • 8pcs silvertone aluminum heatsink: 0.56 x 0.56 x 0.21 inch (14mm x 14mm x 5.5mm) (L*W*H)..
  • Includes: 16pcs black anodized aluminum heatsink: 0.56 x 0.4 x 0.26 inch (14mm x 10mm x 7mm) (L*W*H).
  • 16pcs silvertone aluminum heatsink: 0.56 x 0.4 x 0.21 inch (14mm x 10mm x 5.5mm) (L*W*H)..
  • Includes: 20pcs black anodized aluminum small heatsink: 0.35 x 0.35 x 0.19 inch (9mm x 9mm x 5mm).
  • 20pcs silvertone aluminum small heatsink: 0.35 x 0.35 x 0.19 inch (9mm x 9mm x 5mm).
  • 20pcs low profile copper pad shim heat sink: 0.59 x 0.59 x 0.02 inch (15mm x 15mm x 0.5mm) (L*W*H)..
Check Stock

MAXSUN iCraft B550 Gaming M-ATX Motherboard AMD AM4 Zen 3, DDR4, PCIe 4.0, SATA 6Gb/s, Dual M.2, USB 3.2 HDMI/DP, 2.5G LAN Micro ATX AMD Ryzen 5000 Series Processors CPU

  • 【AMD AM4 Socket】Supports AMD Zen 3 Ryzen 5000((R9 5950X overclock up to 4.79GHz) & Zen 2 Ryzen 3000 Series CPUs, AMD Zen 2 Ryzen 4000 with Radeon Graphics Cards GPU Processors APUs..
  • 【Super Power Design with 8-Layer PCB】14+2 phases digital power design, providing durable and stable performance. The 8-layer PCB quickly dissipates heat around the VRM to improve overall system stability and give the CPU more overclocking headroom..
  • 【Cooling New Design】Active VRM Heatsink and Large M.2 Heatsink. A VRM heatsink provides a large contact area for the MOSFETs and chokes, enables more efficient cooling for better performance and wattage resistance. The M.2 heatsink keeps the M.2 SSD at the optimum operating temperature for consistent performance and reliability..
  • 【Faster Connectivity】Dual Channel DDR4 Memory(Up to 128 GB 4*DIMMS ,MAX:4866 MHz), Ultra Durable PCIe 4.0 x16 Slot & Ultra-Fast M.2 SSD NVMe PCIe 4.0 x4 Connectors, USB 3.2, HDMI/DP, 2.5G Ethernet and 7.1 Channel HD Audio.
  • 【iCraft Sky Light RGB】Adopt skylight RGB, emits brilliant lights. Provide 2*3-pin ARGB(5V) and 2*4-pin NRGB(12V.). Lighting effects can be controlled via onboard buttons or dedicated software.
Check Stock

NINEO H7 LED Headlight Bulbs,CREE Chips 12000Lm 5090Lux 6500K Extremely Bright All-in-One Conversion Kit,360 Degree Adjustable Beam Angle

  • SUPER BRIGHT – Utilizing Customized CREE Chips,each led headlight bulb can light up to 5090 lux and 6000 [email protected] extremely white light with perfect beam pattern,5 times brighter than stock halogen,beating 95% lower intensity LED and HID kit on the market..
  • ADJUSTABLE MOUNTING – Besides brightness,we have designed the latest 360 degree fully adjustable mounting collar,you can make a simple angle adjustments for proper alignment of the bulb mounts to get the perfect light output and correct beam pattern..
  • 360 DEGREE LIGHT DISTRIBUTION – Boldly Utilizing ultra-thin side design,LED side face only has 3.45 mm,ensure 360 Degree uniform light without any dark spot,provide wider viewing angle,ensure your safety..
  • MAXIMUM HEAT DISSIPATION – Unique coverless dual ball bearing fan design,combined 12,000 rotations per minute,and built with double folding copper core thermal heatsink,ensure maximum heat dissipation,make NINEO headlight shine up to 30,000 hours..
  • EASY INSTALLATION – The heatsink part only has 23.5 mm length,fit for 95% vehicle,after installation,there are enough space for the headlight breathing. Can be installed in 20 mins.Plug and play. And we offer 1 year warranty and lifetime support..
Check Stock

RC Motor Heatsink with 21000 RPM Cooling Fan Aluminum Motor Radiator with RGB Brushless Engine Motor Heat Sink for TRAXXAS 1/8 1/10 Car Truck Buggy SCX10 Tamiya ARRMA Axial RC Car 4274 4268 Motor

  • ❄【Strong and Durable】: This Heatsink are made of high-quality aluminum alloy and plastic material, wear resistant, durable and long service....
  • ❄【RGB Led Light】: Especially design heatsink and Cooling fan can power supply over receiver, convenience and easy to use. Moreover,that heat....
  • ❄【Compatible Models】: 42mm Diameter RC Motor Heatsink for 1/8 scale, 1/10scale RC Car and fit 3010/4010 Size Brushless / Brushed Electric Motor....
  • ❄【Up to 8.5V Cooling Fan】: This Motor Heat-sink Radiator with 5---8.4v power Cooling fan which keep your motor cool and make your motor run more....
  • ❄【Easy to Install】: DKKY RC Motor Heat sink with Small size and lightweight that very convenient for you to install and remove..
Check Stock

Pastall 100 PCS (8 Different Sizes) Heatsink Kit with Conductive Adhesive Tape, Aluminum Heat Sink Cooler and Copper Heatsink for Raspberry Pi A B B+ 2/3/4

  • ❤ The 100 PCS (8 Different Sizes) heatsink kit with conductive adhesive tape, Easy to use and could effectively provide good heat dissipation..
  • ❤ As a Raspberry Pi heat sink (using as raspberry pi 4 heatsink/raspberry pi 3B+ heatsink), it has good heat dissipation performance and compatible with most Raspberry Pi cases..
  • ❤ The heat sink is equipped with high-performance thermal conductive adhesive, high viscosity, durable and long lasting..
  • ❤ This small heatsink kit included : 80 pcs aluminum heatsink + 20 pcs copper heatsink( It Contains 8 different sizes of heat sink,Please check the specific size on the picture)..
  • ❤ the heatsinks also could be used for Cooling Development Board Laptop CPU GPU VGA RAM VRAM VRM IC Chips LED MOSFET Transistor SCR Southbridge Northbridge Voltage Regulator.It is an excellent heat sink for heat dissipation in electronic DIY,You will love it!.
Check Stock

2PCS LED COB Chip 50W 110V White Light Engine Integrated Smart IC Driver for floodlight

  • This LED COB chip Integrated Smart IC Driver the new technology, the chip built-in the led driver in to the lamp module, people do not need additional....
  • Do not need power supply,connect 110V AC directly,Suiteable for DIY.
  • Widely used in Traffic lighting, Landscape lighting, advertising lighting, Indoor Lighting, Special lighting,Landscape scene / spot....
  • Power:50W ,Voltage:AC 80-150V (No need power supply ),Color Temperature:6000-6500K,Lumen:4000LM.
  • Remark: It must need a heatsink aluminum for cooling, do not light it without heatsink aluminum. Otherwise the chip will Burn.
Check Stock

AMD Wraith Spire Ryzen Socket AM4 4-Pin Connector CPU Cooler with Copper Core Base & Aluminum 3.81-Inch take from 2600x not in Retail Box (CopperX)

  • Dual tower heatsink – a combination of two sets of heatsink covers more surface area and 6 heat pipes uniform layout distributes heat over more evenly across heatsinks. Air flow - 53. 4 CFM. Noise level - 30. 0 decibels.
  • Uniform 6 pipe – a combination of two sets of heatsink covers more surface area and 6 heat pipes uniform layout distributes heat over more evenly across heatsinks.
  • Lighting badge – cm hexagon logo and embedded addressable RGB lighting strip provides unique perspective light effect.
  • New SF120R Fan – with silent driver IC and a wide range of speed settings, it can be used for silent operation or fine-tuned for maximum cooling performance.
  • Addressable RGB LED controller – the wired addressable RGB LED controller allows for customizable colors and effects with just the touch of a button..
  • Easy mounting system– exclusive all-in-one mounting design for Easy installation.
  • CPU socket support: Intel: LGA2066, LGA2011 v3, LGA2011, LGA1200, LGA1151, LGA1150, LGA1156, LGA1155, LGA1366, AMD: AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2.
Check Stock

Intel i3/i5/i7 LGA115x CPU Heatsink and Fan E97379-003

  • DESIGNED FOR THE PS5 CONSOLE: Engineered to fit perfectly and easily into the PS5 console's SSD expansion slot for a quick and easy install..
  • REVOLUTIONARY COOLING: Made from High-Quality CNC'd aluminum, the Sabrent Heatsink for the PS5 console was specifically designed to maximize cooling performance and simplify installation..
  • UPGRADE YOUR CONSOLE! Rather than creating a heatsink that would only trap the heat in the metal cover, we designed a heatsink that replaces the native PS5 consoles cover. This allows for better cooling using the native fan as well as being a larger heatsink..
  • INDUSTRIAL QUALITY: This SSD heatsink method also uses Sabrent's "Sandwich Design" which ensures even pressure throughout the SSD for efficient and consistent heat transfer unlike methods used by other brands..
  • CONVENIENCE: Comes with an installation guide as well as screws and thermal tape for easy convenient installation..
Check Stock

SABRENT M.2 NVMe Heatsink for The PS5 Console (SB-PSHS)

  • DESIGNED FOR THE PS5 CONSOLE: Engineered to fit perfectly and easily into the PS5 console's SSD expansion slot for a quick and easy install..
  • REVOLUTIONARY COOLING: Made from High-Quality CNC'd aluminum, the Sabrent Heatsink for the PS5 console was specifically designed to maximize cooling performance and simplify installation..
  • UPGRADE YOUR CONSOLE! Rather than creating a heatsink that would only trap the heat in the metal cover, we designed a heatsink that replaces the native PS5 consoles cover. This allows for better cooling using the native fan as well as being a larger heatsink..
  • INDUSTRIAL QUALITY: This SSD heatsink method also uses Sabrent's "Sandwich Design" which ensures even pressure throughout the SSD for efficient and consistent heat transfer unlike methods used by other brands..
  • CONVENIENCE: Comes with an installation guide as well as screws and thermal tape for easy convenient installation..
Check Stock