Categories

Best Down Pipe Forming Line

NPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material

  • High quality materials: If you need to clean or re-thread damaged or jammed pipe threads, look no further than our NPT Thread Forming Taps. This 5-piece set includes 1/8", 1/4", 3/8", 1/2", and 3/4" pipe taps, each made of high-speed steel material for durability and long-lasting use. Our taps are forged from composite steel (GCR15) material, hardened to a higher hardness (traditional 45# carbon steel hardness is 44.
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. It is used for the repair of rusted, broken and slippery threads of water pipe joints. They are available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP) and come in the following sizes: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, and 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts..
Check Stock

Jonas Nordberg - De Visée, Weiss & Dufaut

  • IDEAL POSITIONING: 360° swivel base has dual lockdowns..
  • VERSATILE USE: Two large anvil work surfaces for forming and shaping materials..
  • ADAPTABLE CLAMPING: Built-in pipe jaws handle a range of pipe sizes..
  • PLENTY OF CAPACITY: Jaw opening expands to 14-1/2"..
  • LIFETIME GUARANTEE: Covered by Wilton's lifetime warranty..
Check Stock

RIDGID 21903 SeekTech ST-510 Line Transmitter (10 watts), Underground Cable Locator and Utility Locator , Yellow , Small

  • Fully variable power output to maximize battery life or push the signal further down the run for better utility locating and large-diameter pipe location.
  • LCD display provides instant visual feedback about line resistance, impedance, and current flow keeping circuit information easy to read while underground wire locating.
  • Extended range 25-foot (7,62 meter) terminal leads can attach using the heavy duty clips or built-in magnets and have built-in edge to scrape paint for optimal connection to pipe, ground or connection point.
  • Quick and easy to use line locator with LCD display, LED light indicators and carry handle and straps for sweeping.
  • Generates frequencies: Direct Connect - 128 Hz, 1 kHz, 8 kHz, 33 kHz, 93 kHz.
  • Induction - 1 kHz, 8 kHz, 33 kHz, 262 kHz* - Competitor frequencies available in both direct connect and induction.
Check Stock

Car Hose Removal Plier Tool, Fuel Vacuum Tube Pliers Hose Removal Tool, Fuel and Vacuum Line Remover Separator Pliers Pipe Repairing Tool

  • Hose Removal: This line and pipe separator pliers is mainly used to remove stubborn hoses on heater water tanks, radiators, pumps, air filters, etc..
  • Durable Material: This line and pipe separator pliers are made of steel, sturdy and durable, not easy to damage.
  • Strong Practicability: This line pipe separator pliers has a compact design and strong practicability.
  • Comfortable Handle: This line pipe separator pliers is designed according to ergonomic principles, and the rubber-coated handle is labor-saving and comfortable to use.
  • Applicable Size: This line and pipe separator is suitable for removing fuel, vacuum or heater hoses with a diameter of 5/32 inches to 1/2 inches (4mm to 14mm).
Check Stock

Wilton 675U Utility Bench Vise, 5-1/2\ Jaw Width, 5\ Jaw Opening (28819)

  • LARGE ANVIL WORK SURFACE: For forming and shaping materials..
  • IDEAL POSITIONING: Swivel base rotates 360° and has double lockdowns..
  • VERSATILE CLAMPING: Built-in pipe jaws handle a range of pipe sizes..
  • BUILT FOR RUGGED USE: 30,000 PSI gray cast iron body and movable jaw, with a 60,000 PSI ductile iron base..
  • DURABLE SURFACE: Powder coat paint resists scratches..
Check Stock

Wilton 676U Utility Bench Vise, 6-1/2” Jaw Width, 6' Jaw Opening (28820)

  • LARGE ANVIL WORK SURFACE: For forming and shaping materials..
  • IDEAL POSITIONING: Swivel base rotates 360° and has double lockdowns..
  • VERSATILE CLAMPING: Built-in pipe jaws handle a range of pipe sizes..
  • BUILT FOR RUGGED USE: 30,000 PSI gray cast iron body and movable jaw, with a 60,000 PSI ductile iron base..
  • DURABLE FINISH: Powder coat paint resists scratches..
Check Stock

Wilton 674U Utility Bench Vise, 4-1/2' Jaw Width, 4' Jaw Opening (28818)

  • LARGE ANVIL WORK SURFACE: For forming and shaping materials..
  • IDEAL POSITIONING: Swivel base rotates 360° and has double lockdowns..
  • VERSATILE CLAMPING: Built-in pipe jaws handle a range of pipe sizes..
  • BUILT FOR RUGGED USE: 30,000 PSI gray cast iron body and movable jaw, with a 60,000 PSI ductile iron base..
  • DURABLE FINISH: Powder coat paint resists scratches..
Check Stock

2 Pcs Pipe Seal, 3/4 Inch Opening Thick Seals Mixing Valve Seal for Shower Valve and Shower Head Gasket Seal Pipe Fittings

  • Waterproof and Safe: the pipe seal is made of quality polyethylene waterproof film material, which is safe and reliable to use.
  • And its middle gasket is made of reliable rubber, which can avoid the pipe from leaking or being corroded by water.
  • Reasonable Design to Use: featuring a circular design, the waterproof pipe seal can seamlessly fit the shower valve and shower head pipe of the bathroom, and you do not to cut the product to fit the cumbersome area.
  • Easy to Use: you can use thin mortar (not included) to fix the shower valve seal in place, which can fit the shower pipe or bathtub outlet well, easily forming a tight seal installation without leakage.
  • Effective Leakproof Protection: the pipe seal fits your 3/4 inch pipe.
  • By using this piping seal, you can make ideal openings in cement slab and tile without worrying about leaks, as well as keep the cement slab and tile in nice condition.
  • Widely Applicable: the 3/4 inch pipe seal can be widely applied to shower valve and shower nozzle for bathrooms, kitchens, toilets and more, which will be very practical in your daily life.
Check Stock

Wilton 4800R Reversible Bench Vise 8 Jaw Width 9-1/4 & 14-1/2 Jaw Opening 28823

  • IDEAL POSITIONING: 360° swivel base has dual lockdowns..
  • VERSATILE USE: Two large anvil work surfaces for forming and shaping materials..
  • ADAPTABLE CLAMPING: Built-in pipe jaws handle a range of pipe sizes..
  • PLENTY OF CAPACITY: Jaw opening expands to 14-1/2"..
  • LIFETIME GUARANTEE: Covered by Wilton's lifetime warranty..
Check Stock

Wilton 648UHD Utility HD Bench Vise 8 Jaw Width 8-1/2 Jaw Opening 28816

  • LARGE ANVIL WORK SURFACE: For forming and shaping materials..
  • IDEAL POSITIONING: Swivel base rotates 360° and has double lockdowns..
  • VERSATILE CLAMPING: Built-in pipe jaws handle a range of pipe sizes..
  • BUILT FOR RUGGED USE: 30,000 PSI gray cast iron body and movable jaw, with a 60,000 PSI ductile iron base..
  • TOUGH DURABLE SURFACE: Powder coat paint resists scratches..
Check Stock

WILTON TOOLS 4550R Reversible Bench Vise, 5-1/2' Jaw Width, 6-3/4' & 10-3/4' Jaw Opening (28821)

  • IDEAL POSITIONING: 360° swivel base has double lockdowns..
  • VERSATILE: Two large anvil work surfaces for forming and shaping materials..
  • ADAPTABLE: Built-in pipe jaws handle a range of pipe sizes..
  • PLENTY OF CAPACITY: Jaw opening expands to an incredible 10-3/4" when reversed..
  • LIFETIME WARRANTY: Covered by Wilton's lifetime guarantee..
Check Stock

Wilton 656UHD Utility HD Bench Vise, 6-1/2\ Jaw Width, 6-1/4\ Jaw Opening (28815)

  • LARGE ANVIL WORK SURFACE: For forming and shaping materials..
  • IDEAL POSITIONING: Swivel base rotates 360° and has double lockdowns..
  • VERSATILE CLAMPING: Built-in pipe jaws handle a range of pipe sizes..
  • BUILT FOR RUGGED USE: 30,000 PSI gray cast iron body and movable jaw, with a 60,000 PSI ductile iron base..
  • TOUGH DURABLE SURFACE: Powder coat paint resists scratches..
Check Stock

MECCANIXITY Petrol Fuel Line Hose 3/16\ x 5/16\ 3.3ft Blue for Chainsaws Lawn Mower String Trimmer Blowers Small Engines

  • Petrol fuel line hose is a very common and useful accessory used in various engines at home and in the garden. Fuel line is used for small engines for chainsaws, string trimmers, blowers, lawnmowers, etc..
  • Fuel line hose, is in size of : 3.3ft long, 3/16-inch x 5/16-inch(5mm x 8mm)(ID. x OD.), 1/16-inch(1.5mm) wall thickness.
  • The fuel pipe has strong oil resistance and wear resistance, smooth surface, easy installation, and can work normally in low temperature environment. It is a good replacement for the fuel pipe on the engine.
  • Steps of installation: 1.Prepare a fuel line hose.
  • Please select the fuel pipe of appropriate size, especially the inner diameter and outer diameter of the pipe.
Check Stock