Categories

Best Down The Hole Bits

RYOBI Drill and Impact Drive Kit (95-Piece) with Carry CASE

  • KIT INCLUDES: 19 x Split Point Oxide Drill Bits, 1 x 1” Hex Shank Spade Bit, 4 x Carbide Tipped Masonry Drill Bits, 4 x Brad Point Drill Bits, 1 x 2-1/8“ Hole Saw, 1 x Hole Saw Mandrel, 5 x Hex Shank Nut Setters, 20 x 1” Insert Bits, 1 x Magnetic Bit Holder, 1 x Countersink, 1 x Center Punch, 1 x Hex Key, 1 x Carrying Case.
  • BLACK OXIDE COATING keeps some of these bits protected from corrosion and prolonged wear.
  • HOLE SAW MANDREL holds a hole saw and drill bit in place so you can bore holes for door knobs or locks with a power drill.
  • MAGNETIC BIT HOLDER holds drill bits for driving fasteners without a tool.
  • CARRYING CASE has mounting brackets and a handle for maximum storage and portability.
Check Stock

FREE ZONE - Bit Organizer Set (Yellow) | 158 Hole Bit Storage | 1/4 Inch Hex Bit & Drive Bit Adapter Storage | Screwdriver Bit Organizer | Toolbox Organizer | Tools are Not Included

  • EXTRA LARGE CAPACITY - FREE ZONE bit organizer tray can hold up to 158 of your 1/4 inch hex bits. Storage all your bits in one place..
  • SECURE STORAGE: The patented design for each bit hole keeps the quarter-inch bits secured and safe within the organizer to prevent them from getting lost. Even when flipped upside down FREE ZONE bit holder will not drop your bits..
  • BOTH MOBILE AND STORAGE CAN BE SO EASY:Moving or storage your tools all in one place..
  • EASY to ACCESS: FREE ZONE bit organizer allows easy to access quick bit changes for alternating, removing, or replacing bits when using a power drill or screw gun. Keep all your Phillips, slotted, flathead, or torx bits in one place..
  • More Colors Available in Our Store. PERFECT BIT / SOCKET / TOOL ORGANIZER GIFT FOR TOOL USERS..
Check Stock

FREE ZONE - Bit Organizer Set (Black) | 158 Hole Bit Storage | 1/4 Inch Hex Bit & Drive Bit Adapter Storage | Screwdriver Bit Organizer | Toolbox Organizer | Tools are Not Included

  • EXTRA LARGE CAPACITY - FREE ZONE bit organizer tray can hold up to 158 of your 1/4 inch hex bits. Storage all your bits in one place..
  • SECURE STORAGE: The patented design for each bit hole keeps the quarter-inch bits secured and safe within the organizer to prevent them from getting lost. Even when flipped upside down FREE ZONE bit holder will not drop your bits..
  • BOTH MOBILE AND STORAGE CAN BE SO EASY:Moving or storage your tools all in one place..
  • EASY to ACCESS: FREE ZONE bit organizer allows easy to access quick bit changes for alternating, removing, or replacing bits when using a power drill or screw gun. Keep all your Phillips, slotted, flathead, or torx bits in one place..
  • More Colors Available in Our Store. PERFECT BIT / SOCKET / TOOL ORGANIZER GIFT FOR TOOL USERS..
Check Stock

BlueNatHxRPR 5 PCS 1" to 1-1/2" Wood Spade Drill Bit Set Wood Paddle Flat Bits

  • Production Name: Wood Spade Drill Bits Set, Bits Size Included:1, 1-1/8,1-1/4, 1-3/8,1-1/2", Bits Quantity: 5 PCS.
  • Made of high steel and very durable,widely used for wood, PVC,and other soft woody material as hole cutting.
  • HIGH QUALITY: Self-centering spade tip for spot-on starts, locate hole circle center firmly,drill hole more smoothly and regularly.
  • HIGH EFFICIENCY: Flat paddle design features sharp cutting edges, ensures the hole smooth clean, much faster than traditional wood drill.
  • QUICK-CHANGE HEX SHANK - 1/4" hex shank with groove helps reduce slipping and prevent falling off as well as safety, universal for the most drill driver tool of brands in the markets,one drill use all drill bits.
Check Stock

Chuck handtite keyless 1/2-Inch carded

  • For those that prefer traditional keyed drill chucks, these chucks offer precision and nearly unlimited mechanical advantage for tightening and loosening drill bits and tooling. These 1/32" - 5/8" JT33 Taper drill chucks have knurled grips and the chuck key is included..
  • Arbor hole tapers from .80 inches at the opening (bottom of chuck) to .78 inches 1/2" down into the arbor hole. This gives a good fit profile for getting the correct chuck for your drill press.
Check Stock

Amazon Basics Drill and Driver Multi-Bit Set - 100-Piece

  • 100-piece drill and driver multi-bit set.
  • ideal for metal, wood, plastic, masonry, and hole saws.
  • Includes 52 bits, 8 nut sockets, a magnetic bit holder, 4 hole saws, and more (scroll down the page for a full list of included pieces).
  • Made of durable, wear-resistant alloy steel with quenching treatment.
  • Sturdy plastic case provides designated storage space and easy transport.
Check Stock

COMOWARE Drill Bit Set, 246 Pcs Drill Bits, Drill Bit Sets for Cordless Drill, Drill Driver Bit Set for Wood, Metal, Masonry, Cement and Screwdriver Bits Set Combo Kit

  • ..." screwdriver bits, 30 x 2" screwdriver bits, 6 x nut drivers and 2 x hex keys. Twist drill bit set: 57 x HSS titanium drill bits, 30 x HSS black oxide twist drill bits, 21 x masonry drill bits, 4 x drill stoppers, 17 x brad point drill bits, 4 x spade drill bits, 1 x extension bit. Other accessories: 4 x hole saws, 1 x arbor adapter for hole saws, 1 x countersink, 1 x nail punch, 1 x bit holder..
  • 【WARRANTY & GIFT IDEA】- We will gladly send you the replacement set if you are unhappy with any parts of this kit. The titanium drill bit set, brad point drill bit set, masonry drill bit set, spade drill bit set, hole saw kit and screwdriver bit set are sold separately in COMOWARE, which can be the good replacement or supplement to your toolbox. This drill driver bit kit combines the versatility and practicality that homeowners would appreciate. It is a nice gift-giving option as well..
Check Stock

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • 152mm 6" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

This is Not A Drill Funny Carpenter Woodworking Mens T-Shirt

  • ... 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • Bits Secured with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wi....
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • 102mm 4" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

WSOOX Square Hole Drill Bits for Wood, Woodworking Hole Saw Mortising Chisel Drill Bits (Size: 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch)

  • 【Purchase Notes】The square hole drill bits need to be used in conjunction with the mortise machine. These drill bits not usable with a hand held drill. If you want to use these drill bits on drill press, you need accessories to connect to a drill press..
  • 【Drill Bits Sizes】Drill bits diameters: 1/4 Inch (6.4mm), 5/16 Inch (8mm), 3/8 Inch (9.5mm), 1/2 Inch (12.7mm)..
  • 【Easy to Drill】The carbide drill bit tipped is sharp and wear-resistant. With high hardness and long service life. The drill sleeve has a U-shaped design to facilitate the discharge of wood chips and improve the drilling efficiency..
  • 【Widely Applications】This square hole drill bit is suitable for wood, including MDF, MDF, particle board, channel wood, pine wood, basswood, etc. Note: It is not suitable for processing metal, glass, plastic, concrete, gypsum board etc..
  • 【After-sale Service】WSOOX tools store provide customers with quality but affordable tools. If you have any problem with these square hole drill bits, please contact us feel free and we will reply you within 24h..
Check Stock

Ryobi A98901G 90 Piece Drilling and Driving Kit for Wood, Metal, Plastic, and Masonry

  • BLACK OXIDE DRILL BITS: 21 of these to help with your hole-boring needs.
  • MASONRY BITS: Used for drilling into brick, block, and mortar.
  • HOLE SAWS: 4 of these included to help boring large holes for locks or other applications.
  • FASTENER BITS: 27 bits are included for driving in fasteners. There is also a magnetic bit holder to hold these.
  • STORAGE BOX: The plastic carrying case comes with a locking system and labeled compartments to keep your bits organized upon purchase.
Check Stock

Necygoo Woodwork Drill Bits 4PCS Wood Square Hole Mortising Chisel Drill Bits 1/4 5/16 3/8 1/2 or 6.4mm 8mm 9.5mm 12.7mm Only for 3/4 19mm Mortising Machines Drill Press

  • ❤SQUARE HOLE DRILL BITS❤ These Bits Can Be Used to Make Square Hole for Wood, Please Note That The Mounting Collar Is 3/4" 19mm, So They Are Only....
  • ❤4PCS❤ Package Includes 4 PCS Drill Bits in Total, at The Size of 1/4"(6.4mm) 5/16"(8mm), 3/8"(9.5mm) , 1/2"(12.7mm)..
  • ❤SHARP & DURABLE ❤ Made of Special Steel with High Hardness, Which Are Sharp and Durable (Please Pay Attention to The Sharp Edge When Use)..
  • ❤CONVENIENT DESIGN ❤ With Slot on The Side of Drill Bits, Which Is Very Convenient to Remove The Shavings..
  • ❤PACKAGE❤ Package Includes 4 PCS Wood Square Hole Drill Bits. If You Have Any Question, Please Contact Us..
Check Stock