Categories

Best Draft Beer Tower

Kegco DT145-1B Draft Beer Tower

  • Stylish brushed stainless steel Kegco DT145-1B draft beer tower comes complete with one standard faucet and one black faucet knob.
  • This draft tower measures 14″ tall, giving you an extra 2″ of space over standard draft beer towers.
  • The extra tower height makes it easier to fill tall growlers and pint glasses that do not fit under standard 12″ tall towers.
  • Includes preassembled 5′ brewery approved beer hose with hex nut and neoprene washer for connecting to any standard keg coupler.
  • Can be easily mounted using the mounting gasket and four screws that are included.
Check Stock

DOUBLE TAP DRAFT BEER TOWER - 2-TAP BEER COLUMN 13” HIGH 3” DIAMETER - STAINLESS STEEL BODY WITH UNIQUE BLACK SATIN FINISH - CHROME FINISH FAUCETS - BEERGON BT-1000

  • TIRED OF THE SAME LOOKING BEER TOWER? BEERGON DOUBLE TAP DRAFT COLUMN is made of premium stainless steel with a unique black satin finish so you can distinguish yourself from your friend’s beer dispenser..
  • YOU WISH THAT SOMETIMES YOU HAD A DIFFERENT BEER FLAVOR? NOW YOU CAN ! HAVE 2 beer FLAVORS poured from the same beer tower system at the same time ! It has high quality FDA-safe beer line (3/16” ID, 7/16” OD) that will not impart plastic flavors..
  • YOU ARE WORRIED THAT IT MAY BE COMPLICATED TO INSTALL YOUR NEW TOWER? DO NOT FRET ! BEERGON DRAFT BEER TOWER IS SUPER EASY TO INSTALL on your tabletop and comes with all the hardware necessary to secure this column on your counter..
  • ARE YOU CONCERNED THAT THE BEER TAPS WILL RUST? RELAX ! BEERGON BEER TAPS ARE SOLIDLY MADE and are installed and used in many bars and do not show signs of rust over many years !.
  • YOU THINK THAT A STANDARD 12-INCH TALL TOWER IS NOT HIGH ENOUGH FOR YOU? GOOD NEWS ! WE HAVE ADDED AN EXTRA INCH. Enjoy your 13-inch tall beer tower by pouring your beer into your extra-tall mugs !.
Check Stock

BACOENG Standard Tower Kegerator No Tank Beer Conversion Kit

  • ...ey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful Standard-plated metal finish and a matching Standard-plated faucet with metal lever, this 3" diameter air-cooled Kegco D4743T draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers, as well as a gasket and for screws for easy mounting..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4" length..
  • INCLUDES DETAILED INSTRUCTIONS: This kegerator conversion kit comes with easy-to-follow directions....
Check Stock

Kegco Standard Tower Kegerator Conversion Kit no Tank - STCK-NT

  • ...domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful chrome-plated metal finish and a matching chrome-plated faucet with metal lever, this 3″ diameter air-cooled Kegco D4743T draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers, as well as a gasket and for screws for easy mounting..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4″ length..
  • INCLUDES DETAILED INSTRUCTIONS: This kegerator conversion kit comes with easy-to-follow directions and all of the high-quality draft dispense components you’ll need to quickly and ....
Check Stock

Kegco DT145-2BS-630SS 14" 2-Tap Brushed Stainless Tower - Perlick 630SS

  • The Kegco DT145-2BS-630SS double faucet 14″ tall brushed stainless steel draft tower provides the ultimate in style and sanitation with two stainless steel Perlick faucets.
  • Featuring an innovative design and all stainless steel construction, Perlick faucets are one of the most sanitary faucets available, ensuring your beer gets no exposure to air and making no space for mold and bacteria to grow.
  • The faucet includes a perl ball and floating O-ring that eliminates the need for a valve shaft.
  • The draft beer tower comes equipped with two 5′ lengths of 3/16″ clear beer tubing with nozzle, hex nut assemblies, two sleek black faucet knobs, and a gasket and screws for easy installation.
  • Kegco draft beer towers are compatible with all standard keg couplers.
Check Stock

Dual Beer Tower Dispenser – Draft Kegerator Tower Beer Dispenser Kit with 2 Faucet Tap Handles & Caps, Hose, Keg Wrench

  • DOUBLE YOUR POURING POWER: Limiting yourself and your guests to pouring one beer on tap at your in-home bar is time consuming and frustrating.
  • The G. Francis Double Tap Draft Beer Tower is a beer faucets accessory that will double your pouring power and give your bar the finished feel you have been longing for.
  • USE YOUR EQUIPMENT: Inside lined with foam sheet for cooled tower systems insulation.
  • Tower stands 13.25 inches (33.7cm) tall (not including 3.1-inch/7.9cm tall tap handles) and has a 3-inch (7.6cm) diameter and 4.5-inch (11.4cm) base diameter.
  • 2.75-inch (7cm) center-to-center mounting hole distance (fits standard 3-inch/7.6cm hole pattern).
  • Includes 2 separate 5-foot (1.5m) lengths of 3/16-inch (4mm) inside diameter (ID) (7/16-inch / 11mm OD) clear beer tubing with a 4.5-foot (1.4m) reach.
  • BUILT TO LAST: Constructed from polished silver stainless steel hardware and components, hard plastic faucet knob tap handles, and soft rubber faucet cap sanitary covers for maximum strength and longevity that resists rust and corrosion while preventing scratches and other damage.
  • Transparent hose is FDA approved 21CFR 175.300 PVC.
  • KEEP OUT CONTAMINANTS: Black faucet cap sanitary covers are the most simple and effective way to keep the faucets clean and are....
Check Stock

Kegco Standard Double Faucet Tower Kegerator Conversion Kit No Tank - STCK2-542-2_NT

  • ...l domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • DUAL FAUCET DRAFT BEER TOWER: This 3″ diameter air-cooled chrome-plated metal draft beer tower comes complete with two NSF-approved chrome-plated metal faucets with brass levers and two black ABS plastic faucet knobs. Two 5′ lengths of 3/16″ I.D. beer line extend from the bottom of the tower. These thermoplastic vinyl beer hoses remain flexible and durable at recommended temperatures and pressures, are unaffected by normal cleaning compounds, and will not rot, swell, or dry out..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4″ length..
  • INCLUDES DETAILED INSTRUCTIONS: This kegerator conversion kit comes with easy-to-follow directions and all of the high-quality draft dispense components yo....
Check Stock

5L Craft Beer Tower by Spotted Dog Company (Premium)

  • UPGRADE FROM CHEAP, PLASTIC BEER TUBES: a stainless-steel, pressurized beer tower will modernize the table-draft experience at your bar or tap room. Beer stays cold and carbonated!.
  • IMPRESS YOUR FRIENDS AT HOUSE PARTIES: Treat the crew to draft beer without the expense and hassle of a keg. Fill it at a brewery or with your homebrew and enjoy 10 pints of perfectly carbonated beer..
  • GREAT FOR HOMEBREWERS TOO. Rack your homebrew directly into the craft tower, carbonate, chill and serve. Use the closed cap for natural carbonation or force carbonate with the included 0-25psi regulator..
  • Assembled product dimensions: 16″ tall, 7.125″ diameter. Insulator sleeve sold separately. Search B01N43VTS0 on Amazon to see ours..
  • Want it PERSONALIZED with a design of your choice? Search Amazon for B077GCH68R.
Check Stock

Tiny Home for Military Couple

  • [Solid Construction Every Part - No Leak/ No Loose]: Stainless Steel Draft Beer Tower with standard threads for faucet installation, further fix with faucet wrench, no leaks & no loose. Popular for indoor/ outdoor family gatherings or commercial applications like bars, hotels, and restaurants, etc..
  • [Contents Everything You Need For A Beer Tower]: Comes with 1 stainless steel column, 2 brass faucets, 2 of 5 feet 3/16" I.D. tubing, 1 beer tower gasket, 4 of M6 screws and nuts, 2 clamps, 2 beer faucet springs, 2 beer faucet soothers, 1 beer tap wrench, and 1 cleaning brush. A complete beer dispenser tower..
  • [Safe & Strong Material & Shiny Surface]: High-quality material long-last beer tap tower for homebrew. Rustproof stainless steel column, safe for beverage beer tubing, solid brass faucet with stainless steel core, stainless steel screws, and springs for longer service. The surface of the beer tower and beer faucet are both electroplated for better wear resistance..
  • [Few Minutes for Easy Installation Convenient Kit]: Pre-assembled faucet shanks and beer lines to save your time. 1. install this on a bar counter, then drill a hole on the countertop, place the gasket, pass the hose through the hole, use screws to fix the tower, and install the faucet. 2. D....
Check Stock

Dual Tapper Electric Handheld Percussion Massager by Fatherland Shop

  • [Solid Construction Every Part - No Leak/ No Loose]: Stainless Steel Draft Beer Tower with standard threads for faucet installation, further fix with faucet wrench, no leaks & no loose. Popular for indoor/ outdoor family gatherings or commercial applications like bars, hotels, and restaurants, etc..
  • [Contents Everything You Need For A Beer Tower]: Comes with 1 stainless steel column, 2 brass faucets, 2 of 5 feet 3/16" I.D. tubing, 1 beer tower gasket, 4 of M5 screws and nuts, 2 clamps, 2 beer faucet springs, 2 beer faucet soothers, 1 beer tap wrench, and 1 cleaning brush. A complete beer dispenser tower..
  • [Safe & Strong Material & Shiny Surface]: High-quality material long-last beer tap tower for homebrew. Rustproof stainless steel column, safe for beverage beer tubing, solid brass faucet with stainless steel core, stainless steel screws, and springs for longer service. The surface of the beer tower and beer faucet are both electroplated for better wear resistance..
  • [Few Minutes for Easy Installation Convenient Kit]: Pre-assembled faucet shanks and beer lines to save your time. 1. install this on a bar counter, then drill a hole on the countertop, place the gasket, pass the hose through the hole, use screws to fix the tower, and install the faucet. 2. D....
Check Stock

Kegerator Tower Insulator for Beer Tower - Neoprene Design - Perfect Fit for Kegerator Tap Tower - Easy to Use Beer Tower Cooler Accessory (3.0\ Diameter Beer Tower)

  • MAINTAINS ICY COLD BEER TOWERS: Upgrade your beer dispenser with this simple to use Neoprene kegerator tower insulation sleeve. Ensure that every pour from your draft beer tower comes out icy cold. Even the first!.
  • END FOAM NOW: Maintain a constant temperature throughout your kegerator system with a Keg Tower Insulator. Beer warms rapidly as it travels through a poorly insulated beer tower. Our product reduces foamy pours and wasted beer..
  • SAVE ELECTRICITY WITH LITTLE EFFORT: The added insulation of a Keg Tower Insulator will reduce kegerator energy consumption. Unlike kegerator tower cooler chiller fans, our product takes only seconds to install..
  • MINIMIZE CONDENSATION: Kegerator towers sweat. Condensation buildup is a sign of poor insulation and will lead to corrosion and rust. Increase the lifetime of your kegerator with a beer tower cover..
  • HIGH QUALITY MATERIAL AND BUILD: Crafted from high quality Neoprene with heavy-duty double stitching. Easy to clean and guaranteed to last. 3” Diameter and 11.5” Height. Ideal for double tap beer towers..
Check Stock

JMC Food Equipment SBD-2 Spartan 2\ Beer Dispenser

  • 100% brand new and high quality draft beer tower..
  • Constructed with premium stainless steel, which is anti-rust, sturdy, non-toxic and durable..
  • An essential tool for dispensing beer, brings much convenience for you..
  • The project of beer tower is a simple and economical solution for your household bar..
  • Perfect gift for your friends and family, especially for beer home brewing lovers..
Check Stock

Draft Beer Tower Faucet Dispenser - LUCKEG Brand Double Beer Tap, Stainless Steel 3" Diameter Beer Tower, Beer Line and Beer Tower assemble accessory for Home Brewing

  • 1.Packing: Double Tap Draft Beer Tower, 2 PCS Beer Faucet, 5ft 3/16” ID Hose Drink Tubes, Assemble Accessories.
  • 2.Material: 3″ Diameter Beer Tower, made of Chrome plated steel for Long Life, Chrome plated beer faucet.
  • 3.Assemble: Include Multi-purpose Keg Faucet Wrench, Tower Gasket, Mounting Hardware Bolts, Very easy to assemble.
  • 4.Chrome Plated Brass Faucets with Straight Shaft and Polished Interior, Standard to the Commercial Beer Industry.
  • 5.Guarantee: Quality Guarantee, any problem for the Beer Tower, Money Back or Replacement free..
Check Stock