HESTYA 8 Pieces Kayak Drain Plug Kit Course Thread Drain Plug with 16 Pieces Screws Thread Drain Plugs Bung Screws Kit for Kayak Canoe Boat Replacement Accessories

  • You will get: you will get 8 pieces kayak drain plug kit, with 16 pieces screws, the quantity of drain plugs are enough to meet your daily replacement....
  • Suitable size: Kayak drain plug kit press board size: approx. 2.2 x 1.2 inches (5.6 x 3.1cm), outside diameter of scupper plug: approx. 1 inch....
  • Quality material: Course thread drain plug is made of quality ABS plastic, sun protection, strong and corrosion protection performance, durable and....
  • Easy to use: Thread drain plugs bung screws kit is easy to install, easy to drill, and not easy to mess up.
  • Just install the kayak drain plug kit on....
  • Widely applied: The drain plug prevents water penetration and drains the water from the inner hull of the kayak.
Check Stock

ABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs

  • [Create Stronger Internal Threads]: The ABN Helicoil Rethreading Tool Kit Metric Stripped Thread Repair Kit is a course threads M5 to M12 restorer 131-piece set made of chrome-vanadium with stainless steel coils to restore damaged threads in steel, cast iron, and aluminum spark plug engine repairs, stripped oil pan drain plugs, and more.
  • [Contents]: Thread restorer kit metric set includes 5 insert installation tools, 5 lug break pin tools, 5 twist drill bits, 1 hex key, 5 thread taps, 110 wire thread inserts, carrying case, and instructions.
  • [Perfect Sizes]: Twist drill bit sizes 5.2mm, 6.3mm, 8.3mm, 10.5mm, 12.5mm.
  • Screw tap and thread insert sizes M5x0.8x6.7mm, M6x1.0x8.0mm, M8x1.25x10.8mm, M10x1.5x13.5mm, M12x1.75x16.3mm (where M12 means thread outer diameter = 12mm, 1.75 means pitch of thread = 1.75mm).
  • [Quick Organization]: Steel carrying case with latch and molded plastic inside tray insert to keep universal thread repair tool pieces separated and easy to access.
  • Includes bottom recesses for organizing the coils in included plastic bags.
  • [Easy to Use]: Remove your damaged thread by using an included twist drill bit.
  • Load the thread insert into installation tool.
Check Stock

TIME-SERT M12x1.25 Spark Plug Thread Repair kit with Inserts p/n 4212-125

  • M12x1.25 spark plug thread repair kit with 6 inserts by TIME-SERT.
  • Includes 2) inserts 9mm 2) inserts 15mm 2) inserts 17.5mm reach.
  • Spark plug thread repair kits by Time-Sert professional thread repair.
  • Fast and reliable repair by Time-Sert M12x1.25 spark plug repair kit.
Check Stock

TENSPAL Kayak Drain Plug Kit Hull Coarse Thread Bung for Canoe Boat Set with Screws Replacement Hardware Accessories 2 PCs

  • ✔ 【PRACTICAL PRODUCT】- This Kayak Drain Plug Kit fits all kinds of canoeing, canoe, ship drain plug. Stops water infiltration and it is used to....
  • ✔【EASY TO USE】- Just install this kayak drain plug kit to the kayak boat, there are rubber gasket on each plug protect hull from damage..
  • ✔ 【PACKAGED】- This kayak drain plug kit packaging included 4 coarse thread kayak drain plug kit with 8 stainless steel screws..
  • ✔ 【SIZE FOR YOU】- Kayak drain plug kit press board size: Approx. 2.2*1.2 inches (5.6*3.1cm) , Outside diameter of scupper plug: Approx. 1 inch....
  • ✔【100% SATISFACTION GUARANTEE】- We promise 100% satisfaction guarantee and 60 days Money Back Services. Tips: Please confirm the size is....
Check Stock

Time-Sert M14x1.5 Oil pan Thread Repair kit

  • M14x1.5 oil pan thread repair kit p/n 1415A.
  • simple 4 step process will repair stripped threads in your oil pan..
  • Kit includes the tools and 5 inserts for the repair.
  • p/n 1415A TIME-SERT thread repair kit drain pan.
  • The tooling is made to be used by hand using 12 point sockets with a standard 3/8 ratchet..
Check Stock

TIME-SERT M10 X 1.50 Metric Thread Repair Kit 1015

  • M14x1.5 oil pan thread repair kit p/n 1415A.
  • simple 4 step process will repair stripped threads in your oil pan..
  • Kit includes the tools and 5 inserts for the repair.
  • p/n 1415A TIME-SERT thread repair kit drain pan.
  • The tooling is made to be used by hand using 12 point sockets with a standard 3/8 ratchet..
Check Stock

Spark Plug Repair Kit, 16Pcs Carbon Steel Spark Plug Tap Thread Repair Tools M14 X 1.25 Rethreading Set with Portable Case Suitable for All Kinds of Product that Require High Thread Strength

  • Main Function : The spark plug repair tools can be used to quickly and efficiently repair damaged spark plug threads..
  • Wide Range Application : Our spark plug thread kit is suitable for all kinds of products that require high thread strength..
  • Fully Equipped : This spark plug tap thread is mainly used for clean and rethread spark plug port, which is a complete kit for meeting different needs. 5 x 11mm tap inserts black finish. 5 x 18mm tap inserts black finish. 5 x 18mm tap inserts yellow finish..
  • with a Storage Case : This spark plug tap thread comes with a plastic box is provided for convenient storage and carrying. It can also save room for you and easy to find..
  • Easy Installation : The spark plug thread repair kit is convenient to install, high strength, long service life..
Check Stock

ABN Spark Plug Thread Repair Kit, 14mm Reamer Cylinder Thread Repair Tool & Thread Insert – Spark Plug Rethreader Kit

  • REPAIR PLUGS: The ABN Thread Repair Tool Kit is a time-saving kit that allows you to cut threads to fix a stripped and damaged 14mm spark plug threaded hole port and repair plug configurations in aluminum heads.
  • Socket includes metal retainers to keep plug held inside during install and removal.
  • VARIOUS APPLICATIONS: Chrome-vanadium steel (CR-V) M14 x 1.25 internal thread size on repair sleeve suitable for damaged spark plug threads to clean and rethread spark plug ports on a BMW vehicle and some Nissan and Toyota engines.
  • As long as the head is aluminum and the spark plug hole is straight with room to turn the tap using either a ratchet or wrench, this kit will allow you to repair plugs without removing the head.
  • EASY TO USE: Rotate the crankshaft to make sure no ports/valves are open, use the tap to install new threads, choose the proper depth of insert, and screw it firmly into the newly tapped head.
  • Apply grease on the tap to help catch any metal shavings (rather than letting them drop into the cylinder) and back out the tap out every half turn to every whole turn to clean the metal shavings from the tap.
  • PERFECT SIZE: 14mm reamer with 12 points.
Check Stock

Duthyvea Boat Oval Garboard Drain Plug Kit for 1 Inch Marine Bilge Hole Hull Pipe, Stainless Steel Polishing, 3/4 Thread, with Screws & Rubber Seal O-Rings

  • Boat Drain Plug Kit fits 1" diameter transom draining pipe hole. Back mount depth is about 0.55" (14mm). The surface length of the oval garboard drain plug kit is 2" (50mm), width: 1-1/2" (38mm)..
  • Quick Draining: This garboard drain plug kit has two layers thread with OD 3/4", you can easily to screw out the first layer of boat plug with hand, then the marine bilge water will flow out by middle hole..
  • The Boat Plug Retains Itself When Left Open: The retention system works for holding marine drain plug by the second threads layer, it’s not only save your time to find a wrench to open or close draining hole, but also make you conveniently to storage a boat plug by itself..
  • Stainless Steel Boat Drain Plug Kit: The surface of oval garboard drain plug is mirror-polished, made of stainless steel will reduce corrosion..
  • Replacement O Rings & Stainless Screws: 4 spare rubber o-rings would be included in the boat drain plug kit for watertight seal, 2pcs stainless steel screws help for installation..
Check Stock

YUSOVE Garboard Drain Plug Kit,Marine 316 Stainless Steel Drain Plug Fits 1" Hole,with Screws,Boat Transoms Garboard Drain & Plug

  • Boat garboard drain plug fits 1'' hole,nut plugs need to be disassembled with tools such as wrenches or pliers,tapered pipe threads ensure water tight fit..
  • Boat drain plug kit fits 1 inch hole,2 inch flange diameter,1/2 inch NPT Thread (External thread is 0.8 inches),the detail size refer to the pictures..
  • Transom drain plug is made of 316 stainless steel,rust proof and anti oxidations, durable in saltwater circumstance,high polished surface for mirror-like appearance and to match modern watercraft,boat,yacht..
  • Stainless steel drain plugs,maintain sealing under vibration conditions,great accessories for boat transoms,fish wells,ice chests,kayak,yacht and more..
  • Marine drain plug kit,with mounting screws,please check carefully before purchasing,make sure you are ordering what you want and need for your application,any problem,welcome to contact us..
Check Stock

OEMTOOLS 25649 14mm Cylinder Head Rethreaded Kit | Mechanic’s Tool for Rethreading Cylinder Heads | Includes Combination Tap/Reamer & 3/8 7/16 1/2 & 3/4 Inserts | Rethread Aluminum Heads Only

  • EASY REPAIR: Next time you have to repair a spark plug, just reach for this easy thread repair tool kit. You won’t need anything else for your repair, and anyone can use it. Keep in mind, this product is meant only for use with aluminum heads.
  • QUALITY MATERIALS: Our spark plug thread repair kit is built to last with its steel parts.
  • VARIOUS INSERTS: This kit comes with everything you need to repair spark plugs in your machine. The sizes include the following: 3/8”, 7/16”, 1/2”, and 3/4” inserts, as well as a combination tap/reamer.
  • BACKING: Our OEMTOOLS 14mm Cylinder Head Rethreaded Kit is backed up with our OEMTOOMS Limited One Year , so if anything happens to your product, you don’t have to worry about it.
  • EASY TO STORE: This thread repair kit is the perfect size to store in one of your shop drawers, or it could even go in a drawer in your own home.
Check Stock

Autocraft - Spark Plug Thread Repair Kit | Fits M14 X 1.25mm Sizes | Repair Damaged Spark Plug Hole Threads | Rethreader Set with Thread Inserts

  • REPAIR ANY DAMAGED SPARK PLUG HOLES: The thread repair tool kit easily repairs the 14mm spark plug threaded hole port. It can be used for creating stronger internal threads in all metals, composites, polymers, and other materials by repairing damaged or stripped internal threads and regaining the original thread size..
  • WIDE APPLICATION: The kit is widely used in the automotive industry, rail vehicle industry, shipbuilding industry, household appliances, construction machinery, business machinery, electronic products, engineering plastics, advanced furniture, aluminum die-casting and other industries..
  • MATERIAL USED: The kit is made of hardened carbon steel for high strength and long-lasting durability. Our carbon steel spark plug thread repair kit uses strict quality control standards, improved design, advanced production technology, and more durable products..
  • PACKAGE CONTENTS: The Rethread tool kit includes a tapping reamer and 4 different depths of inserts to repair deep-rooted plugs..
  • SATISFACTION GUARANTEED: We at Tool Liquidators solely believe in 100% customer satisfaction. If in any case, you are unhappy with your purchase, then please let us know, we will do anything required to make you a happy customer..
Check Stock

ABN Professional Thread Repair Kit - 131pc SAE Drill Thread Restorer Kit for Restoring External or Internal Screw Holes

  • [Restore Stripped Screws]: Repair stripped threads with the ABN Thread Repair Tool Set.
  • 131pc long rethreading kit is ideal for repairing 1/4, 5/16, 3/8, 7/16, or 1/2-inch internal or external screw holes.
  • [Use for Any Job]: Fix up your engine or restore automotive wear and tear with the rethreading tool kit.
  • Complete any drilling, tapping, and tang removal jobs with the thread chaser set.
  • [Carry With You Anywhere]: Spark plug thread chaser and bolt hole thread repair kit comes in a steel case to keep all 131 pieces neatly organized and labeled for your convenience.
  • Lightweight 5lb (2.3kg) case is easy to transport between job sites and takes up little room making it easy to store.
  • [Rely on Maximum Strength]: Thread fixer tools are constructed of chrome vanadium steel to withstand repeated use and to help prevent corrosion.
  • Inserts are heat-treated for long-lasting strength.
  • [Package Details]: Bolt thread cleaner tool standard thread repair kit includes 5 twist drills, 5 screw taps, 5 installation tools, 5 breaking pin tools, 111 thread inserts, and a carrying case.
Check Stock