Categories

Best Dremel Table Vise

Dicrey Mini Table Vise Clamp Small Bench Vice New Upgraded 3.5 Miniature Jewelers Hobby Clamp On Table Bench Vise Tool for Arts,Crafts,Woodworking,Modeling

  • Full Usage:The mini table vise can work for small....
  • Material:Mini vise body is made of cast Aluminum,handy miniature vise,ideal for holding small parts.Durable and lightweight vise,protable tool.Screws....
  • Great for Hobby:Suitable for jewelry,hobbyist, model making, electronics, home and work-bench many more applications.Hold small parts for soldering as....
  • Easy to Use:The mini vise is incredibly and easy for everyone.Simply turn the bar on top to open/close the clamp onto a table surface and then tuen....
  • Protable and Lightweight:Clamps onto a Surface up to: 35mm Thick.Jaws: Smooth.Vise Body: Aluminum.Jaw Width: 36mm.Maximum Jaw Opening:....
Check Stock

Grizzly Industrial H2992-6' 2-Piece Milling Vise

  • Maximize the work area of your milling table and get the maximum spindle to table clearance with this 2 piece milling vise the vise jaw faces measure.
  • The vise jaw faces measures 2 1/4-Inch by 6-Inch and the movable jaw has a 1-Inch range.
  • The bottoms are keyed to speed up alignment.
Check Stock

Mini Table Vise Clamp Small Bench Vice For Small Work Hobby Jewelry DIY Craft Repair Tool Portable Work Table Bench Vise Tool Vice

  • [Wide Application] - Used for Small Work, Crafts, Arts, Detailing, Woodworking, Workbench, Soldering, Garage, Hobbies, Finishing, Modeling, Tables, Flat, Angular, and Round Objects.
  • [Easy to Use]- This vise is incredibly easy to use for anyone. Simply turn the bar on top to open and close the clamp onto a table surface and then turn the screw to securely clamp any small objects to work on..
  • [Great for Woodworking]- MUDUOBAN table Vise is ideal for any small woodworking job or project that you may be working on. Clamp down any wooden block for sanding, grinding, detail, drilling, carving, chiseling, and much more.
  • [Mini size and Portable] this vise is not only lightweight, but incredibly durable. Handheld use. It can be installed at the edge of all kinds of desktop, Maximum fixed thickness 1.2"(30mm), quick and easy disassembly.
  • [Durable]- This mini table vise is made of a heavy duty aluminum alloy, strong and sturdy,a handy miniature Vise.
Check Stock

JCL Vise Jaws - Nylon, Multipurpose 4\ - Use on any Metal Vise, Magnetic Reversible Pads, Clamp Flat or Round Products

  • Multipurpose Design: These 4" nylon vise jaw pads are designed for you to use either the flat or grooved side to protect and hold your workpiece from your metal bench vise. Plus, our soft vise jaws feature a grooved surface specifically designed to keep round or irregularly shaped items securely in place..
  • Extra Compatible: Our nylon vise pads are compatible with a wide variety of tools including vise block, drill press vise, woodworking vise, brass hammer, clamps, bench vise and mill clamps. Add it to your collection of drill press accessories..
  • Protects Delicate Surfaces: Our bench vise jaw covers are made from durable nylon which is sturdy enough to hold your workpiece in place but won’t discolor or leave any marks on their delicate surface. These nylon vise pads are ideal for woodworking, gunsmithing, jewelry making, and more..
  • 8 Strong Magnet for Easy Attachment: Each nylon vise pad set has 8 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise..
Check Stock

JCL Vise Jaws - Nylon, Multipurpose 6' - Use on any Metal Vise, Magnetic Reversible Pads, Clamp Flat or Round Products

  • Multipurpose Design: These 6" nylon vise jaw pads are designed for you to use either the flat or grooved side to protect and hold your workpiece from your metal bench vise. Plus, our vise jaws feature a grooved surface specifically designed to keep round or irregularly shaped items securely in place..
  • Extra Compatible: Our nylon vise pads are compatible with a wide variety of tools including vise block, drill press vise, woodworking vise, brass hammer, clamps, bench vise and mill clamps. Add it to your collection of drill press accessories..
  • Protects Delicate Surfaces: Our bench vise jaw covers are made from durable nylon which is sturdy enough to hold your workpiece in place but won’t discolor or leave any marks on their delicate surface. These nylon vise pads are ideal for woodworking, gun-smithing, jewelry making, and more..
  • 8 Strong Magnet for Easy Attachment: Each nylon vise pad set has 8 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise..
Check Stock

7' Front Vise Woodworking Bench Vise Cast Iron Front Screw Vise Woodworking Front Vise Wood Vise

  • Well Built Quality - Our Front Vise made of high quality steel, resistant to corrosion and rust, sturdy surface greatly reduces the wear rate,and durable to use..
  • Professional Design - This Front Screw Vise for quick sturdy mounting to your workbench. The 7-inch guide bar makes it easy to work and holds things more firmly..
  • Dimension - 1-3/16" diameter x 15-1/2" Length screw，3/4" diameter guide Rods and 10-1/4" width x 19-1/4" Length vise.
  • Easy to Work - Simply pull up on the handle and hold, this will cause the vise nut to disengage. Adjust the jaws to the appropriate opening and let go of the handle. A simple turn of the main handle will engage the screw and tighten the vise on the product..
  • Widely Used - Useful for woodworking, engineering and welding. Slots in base plate so you can fix the vice to a work table or machine table..
Check Stock

SWANLAKE 4.5 Inch Vise Jaw Pads Covers Protectors 1 Multi-Grooved & 1 Standard Set

  • These soft jaws for bench vise are made of Thermoplastic polyurethane rubber which is sturdy enough to hold your workpiece firmly in place and protect it from your metal bench vise..
  • Each vise pad set has 4 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise..
  • This 2 pack set with both standard & multi-groove jaw pads 4.5″ will work with a 4 inch to 5 inch bench vise..
  • This vise jaw covers feature groove sizes: 90 Degree angles: 1/16″, 1/8″, 1/4″, 3/4″. 60 Degree angle: 13/32″..
  • These vise jaws are ideal for woodworking, jewelry making, and more delicate type work..
Check Stock

10pc Diamond Tipped Drill Bit Set - 1/16, 5/64, 3/32, 1/8 - Drill Glass Stone - Fits Dremel

  • Twist drill bits for fine-detail drilling with the cutting power of diamond.
  • 10 bit set, two each in diameters 5/64″ & 3/32″ and three each in 1/16″ &1/8″.
  • Industrial diamond permanently brazed to cutting tip during manufacture.
  • Hardest drilling material available, cuts glass, stone, tile.
  • use with pin vise for hand drilling or Dremel-type rotary tool, power drill.
Check Stock

Z-COLOR Mini Flat Clamp Table Jaw Bench Clamp Mini Drill Press Vice Opening Parallel Table Vise DIY Sculpture Craft Carving Tool

  • ...igned to keep round or irregularly shaped items securely in place and a flat surface specifically designed to protect and hold delicate flat or square objects..
  • 4 Strong Magnets for East Attachment: Each vise pad set has 4 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise..
Check Stock

FRICTIONWORKS Vise Jaws. Made In USA Pro Grade SH80 Hard Non-Scratch Polymer. 4 Inch Magnetic Bench Vise Covers. N48 Magnets. Fits 3 4 5 Inch Vises and Blocks

  • ...OLD – 8 N48 spec Neodymium rare earth magnets force rated at 7 lbs each. We have tried other vice jaws and by far the strongest magnetic vise jaw pull force is with Frictionworks vise soft jaws. The only vice jaw covers with listed specs and the magnet strength you need to keep the protective jaws solidly on your table vise, jaw horse, drill press vise, swivel vise, vise clamps, or heavy duty bench vise..
  • EXCLUSIVE MAGNET RETENTION SYSTEM – The innovative internal bracket system in our soft jaws secures the magnets to the vise jaw caps with a stainless bolt and is then overmolded into the vice jaw pads, solving the biggest failure point of all soft jaw pads for metal vises leading to the toughest vise jaws made..
  • ENHANCED MATERIAL – Our proprietary fiber-reinforced polymer composite, shore hardness 80-D, provides an incredibly tough jaw face and works great and is recommended if you really want to clamp down hard. Use for gunsmithing, woodworking, jewelry working, , muzzle device installation, 80/20 Extrusions, plumbing, maching, as a golf club vise, and more. For mid-torque bench vise clamping applications see or SH60 grey medium density vise pads..
  • PROTECTIVE SURFACE – While incredibly tough, our 4″ vise soft jaws specially textured surface ....
Check Stock

Mini Bench Vise Small Table Clamp Universal Drill Press Vise For Diy Jewelry Watch Repairing Nuclear Carving Clip Hobby Craft Repair Tool

  • Package include 1 x aluminum vice clamp, mini size and portable, handheld use. it can be installed at the edge of all kinds of desktop, maximum fixed....
  • Mini drill press vise flat clamp table bench with 4 hard adjustable plastic pins for minimizing the risk of slipping and scratching..
  • Mini vise body is made of cast aluminum,a handy miniature vise clamp down any wooden block for sanding,grinding,detail,drilling,carving,chiseling,and....
  • The mini bench vise is ideal for holding small parts in jewelry, jewelry carving, watch repairing, model making, electronics repairing, hobby,....
  • This clamp is easy to use.simply turn the bar on top to open and close the clamp onto a table surface and then turn the screw to securely clamp any....
Check Stock

Roto Zip CN1 Replacement Collet and Nut Kit

  • Convert your Dremel corded & cordless rotary tool into a light-duty, bench-mounted precision wood shaper with the router table attachment.
  • Compact router table makes it easy to slot, edge, groove and/or sand items in both conventional and irregular shapes.
  • Easily mounts to any tabletop workspace. Compact and easy to store when not in use.
  • Features an adjustable fence and a large 8x6 inch worktable to support light-duty projects and precision work.
  • Compatible with Dremel 8220 cordless rotary tool and for use with corded models 100, 200, 3000, 4000, 4200 and 4300.
Check Stock

Fashionclubs Mini Table Vice Craft Bench Vise Work Bench Clamp Swivel Vice Hobby Craft Repair Tool

  • A handy miniature Vise, ideal for holding small parts in Jewelry, Hobby, Model making, Electronics, Home and Work-Bench many more applications.
  • This mini table vise is made of a heavy duty aluminum alloy that is not only lightweight, but incredibly durable.
  • Clamp down any wooden block for sanding, grinding, detail, drilling, carving, chiseling, and much more.
  • This vise is incredibly easy to use for anyone. Simply turn the bar on top to open and close the clamp onto a table surface and then turn the screw to securely clamp any small objects to work on.
Check Stock