Categories

Best Drilbit For Drilling Ceramic Tile

K Kwokker 15Pcs Masonry Drill Bit Set 5/8\ to 1/8\

  • ☺[15 Pcs 16mm to 3mm (5/8" to 1/8") Masonry Drill Bits, More Quantity, More Size] Masonry drill bit set with case. Easy to store and take. 16mm 14mm 12mm 10mm 8mm 6mm 5mm 4mm 3mm (5/8" 9/16" 1/2" 3/8" 5/16" 1/4" 3/16" 5/32" 1/8"). There are multiple 9 sizes that will help in drilling by starting with the smallest bit and continuing to the size needed. To meet your more needs..
  • ☺[Ceramic Drill with Cemented Carbide Tip, Hardness is Higher Than Ordinary Drill, More Wear Resistance] Excellent tile drill bits with nice point, make the drilling much more easier, less effort and work with a minimum of pressure. Like a hot knife thru butter! WATER IS THE KEY TO GETTING DRILL BITS TO LAST. PLEASE COOLING WITH WATER AND CONTROL THE SPEED WHEN DRILLING..
  • ☺[Widely Used Range, a Good Beginning is Half Done, Carbide Drill Bits Perfect For] masonry, title, glass, wood, plastic, ceramic, terracotta, brick, stucco, brick, cinder block, steel, laminate flooring, garden pot, marble, pickguard, mirrors, windows, etc. PLEASE NOTE THAT FOR DIFFERENT SIZES, IT IS RECOMMENDED TO USE DIFFERENT DRILLING SPEEDS TO PREVENT DRILL BIT DAMAGE CAUSED BY WRONG DRILLING SPEEDS..
  • ☺[1 x K Kwokker Ceramic Drill Bit Replaces Two Drill Bits (1 x Glass & Tile Drill bit + 1 x Masonry ....
Check Stock

6PCS Ceramic Tile Drill Bits, Mgtgbao Masonry Drill Bits Set for Glass, Brick, Tile, Concrete, Plastic and Wood Tungsten Carbide Tip for Wall Mirror and Ceramic Tile with Size (6mm-12mm).

  • _6 pieces fine grade high durable drill bits in 4 different sizes: that is 2 x 6 mm(1/4"), 1 x 8 mm(5/16"), 1 x 10 mm(3/8"), 1 x 12 mm(1/2") fit your different needs.
  • _ High Quality Multi-purpose Drill Bit Set: Tungsten Carbide Tipped for prolonged life and heavy-duty use.
  • _Special Design: U type slot design with fast drilling dust remove, 3-flats shank allows drill bit to be held tightly and stably in power drill..
  • _Cut Perfect Circles Holes: Suitable for glass, ceramic tile, wood, ceramic, stone, concrete, brick, etc. When drilling hard material (glass, porcelain floor tile, marble or granite), please use water for lubrication.
  • _ One drill bit replaces two drill bits (1x glass & tile drill bit + 1x Mansonry drill bit). Ideal for drilling fastner holes in bathroom tiles, or wall mirrors. Once it drills through the tile or mirror this drill bit will cope easily with any masonry behind it.
Check Stock

Driak 5pcs Tungsten Carbide Titanium Coated Glass and Tile Drill Bits Set for Ceramic Tile Marble Mirror Glass

  • 5Pcs Ceramic Tile Glass Triangular Drill Bit Set Alloy Head 3-10mm Drill tool.
  • Durable and longer life Spear pointed design reduces breakout.
  • size:3/4/6/8/10mm with Hex Shank for Ceramic Tile Marble Mirror&Glass.
  • Applicable to ordinary hand electric drill or bench drill..
  • Suitable for drilling in ceramics, glass, granite, ceramic tile and brick wall, etc..
Check Stock

Gunpla 10Pcs Multi-Material Drill Bits Set, Cemented Carbide Masonry Drill Bits for Glass, Plastic, Tile, Concrete, Brick, Wall, Wood and Brick Wall 6mm

  • 【ALLOY STEEL MATERIAL】: Gunpla drill bits set forged from premium ALLOY STEEL quality, glass drill bits provide smooth, accurate drilling in ceramic tile, marble, mirrors, glass, aluminum, concrete and wood. The durable drill bit must be kept well lubricated for the best possible results. This is most commonly done by running water over the drilling surface.
  • 【DIMENSION】: Designed with a 6mm Spear-pointed Tip, the multi material drill bits have a 1/4 inches design that reduces breakout. Length: 70mm, Shank: approx. 3/16 inches. Our spear head drill bits are heavy duty, meant to serve for a very long time..
  • 【APPLICATION】: Ideal for drilling ceramic tiles, glass, marble, and mirrors. When drilling hard materials, please use water for lubrication, good cooling can extend the service life of the drill bit. The glass drill bits are typically used with electric drills to create holes in all these cited material.
  • 【TUNGSTEN CARBIDE TIP】: The ceramic drill bit feature a Tungsten carbide tip for extended bit efficiency and life. During the process of drilling, the coating rubs away the glass, creating a perfect hole in the material being drilled.
  • 【WHAT YOU GET】: The package includes 10pcs 6mm glass and tile drill bits and a plastic storage box, ....
Check Stock

4 Inch Diamond Drill Bits Glass Hole Saw Drill Bit Set for Glass Ceramics Porcelain Ceramic Tile Marble

  • SMALL DRILL BIT: Hole diameter: 100mm(4"),total length: 56mm(2.2").Package includes 1 pcs 100mm diamond hole saw drill with a transparent box..
  • HIGH QUALITY: Diamond ceramic hole saw are made of industrial grade carbon steel and have a nickel-plated coating to resist corrosion..
  • LARGE CLEARANCE HOLE: These glass hole saw set along the drill bit facilitate the entrance of cooling water and escape of chips and other particles from drilling. Makes the drilling process easier..
  • APPLICATION: Suitable for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, marble, light stone and fiberglass..
  • WARM TIPS: Start drill at 45 Degree to surface and align to 91 Degree as hole forms.Water is required to cool down the drill when using them which will greatly extend the life of the bit..
Check Stock

4-1/2” Diamond Drill Bits Glass Hole Saw Drill Bit Set for Glass Ceramics Porcelain Ceramic Tile Marble

  • SMALL DRILL BIT: Hole diameter: 115mm(4-1/2"),total length: 56mm(2.2").Package includes 1 pcs 115mm diamond hole saw drill with a transparent box..
  • HIGH QUALITY: Diamond ceramic hole saw are made of industrial grade carbon steel and have a nickel-plated coating to resist corrosion..
  • LARGE CLEARANCE HOLE: These glass hole saw set along the drill bit facilitate the entrance of cooling water and escape of chips and other particles from drilling. Makes the drilling process easier..
  • APPLICATION: Suitable for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, marble, light stone and fiberglass..
  • WARM TIPS: Start drill at 45 Degree to surface and align to 91 Degree as hole forms.Water is required to cool down the drill when using them which will greatly extend the life of the bit..
Check Stock

Glass Drill Bit Set,5 pcs Diamond Bits Hole Saw Bottle Extractor Remover Tool for Ceramics,6-14mm Set Drilling Granite Porcelain Tiles Pot Lamp Quartz Slate Pieces Fish Tank Pack Coated Grit

  • 【EXTREME HARD 】These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. A thicken diamond coating on the tops offers superior cutting strength for maximum drilling outcomes..
  • 【EXTRAORDINARY SHARP】Each diamond hole saw has a smooth and exact finish that lower the incision resistance and drill pressure, increases the sharpness, and effectiveness of water lubrication. Excellent for making clean and precise holes on glass or ceramic and considerably extending drill bit life..
  • 【LARGE CLEARANCE HOLE】These glass hole saw set along the drill bit facilitate the entrance of cooling water and escape of chips and other particles from drilling. Makes the drilling process easier..
  • 【WIDE USAGE】5 varied size drill bits Included with this glass drill bit set to meet various demands. Perfect for drilling glass, tile, porcelain tile, ceramic tile, brick, and stone..
  • 【100% Satisfaction Guaranteed】We are committed to making sure that you have a satisfying purchase experience, so if you have any questions or sugguestions, please contact us.(Log in to your account, check the order ID and click "Contact Seller" to contact us.).
Check Stock

TOMMARS Diamond Drill Bits Set 5 Piece Diamond Hole Saw for Tile Ceramic Marble Granite Ceramic Porcelain 1/4, 5/16, 3/8, 1/2 inch

  • Tech information: Diameter 1/4 inch(6mm), 5/16inch (8mm), 3/8inch (10mm) & 1/2 inch (12mm).
  • The tile drill bit set is equipped with a 1/4 inch hexagonal shank and is therefore compatible with all common drills & cordless screwdrivers..
  • Diamond Drill Bit integrated with wax lubricant inside which melts while dry drilling and cools the cutting surface. This allows for longer drilling without much wear on larger projects..
  • Diamond core drill bit developed to drill in extremely hard materials such as tile, ceramic, marble, granite, ceramic, porcelain, etc..
  • Attention: Begin drilling approximately at a 45° ( between the hole saw and the working surface ) angle and only moderate pressure is good for the service life of the dry core bit..
Check Stock

Millie Masonry Drill Bit Sets-Concrete Drill Bit Sets for Tile, Brick, Cement, Concrete, Plastic, Cinder Block, Glass,Wood,Etc, Industrial Strength Carbide Tips. (10 Pieces/Black)

  • MULTI-MATERIAL DRILL BITS - Easily Drills through Ceramic Tile, Glass, Cinderblock, Hard Plastic, Cement, Concrete, Mirrors, Windows, Travertine, Brick, Wood, and So Much More!.
  • High-quality Materials - Made of high-quality steel, all of which are made of high-quality carbon steel after heat treatment. It has a variety of properties such as durability, rust resistance, and new scientific spiral chip removal space design to speed up chip removal and improve work. Efficiency saves time and effort.
  • FEATURES - The drill bits openings are neat, smooth, and free of smashed edges will not cause tremors easy positioning can increased opening speed.
  • U type slot design with fast drilling dust remove, 3-flats shank allows drill bit to be held tightly and stably in power drill..
  • INCLUDES THE FOLLOWING SIZES - The set has six different sizes: (10pcs)1/8-80mmx2 ,1/4-100mmx2 ,1/4-150mmx2 ,5/16-150mmx1 ,3/8-150mmx2,1/2-150mmx1 1 x Transparent plastic box, provide you with different needs.
  • WIDELY USAGE - Drill bits set is perfect for drilling in all kinds of materials inlcuding ceramic tile, concrete, tile, brick, wood, plastic, glass, masonry, and more. Note: When drilling hard material (glass, porcelain floor tile, marble or granite), please use water for lubrication..
Check Stock

Diamond Hole Saw Opener,M10 Metalworking Multiple-Tooth Core Drill Bit,Angle Grinder Hole Saw Cutter Tool for Marble Ceramic Tile Wall Glass(55mm)

  • Made of diamond material, durable and long service life..
  • Opening neat and smooth, no broken edges, no shaking and chip easily..
  • Small incision resistance, drilling stably and will not break the border..
  • Ideal for drilling the mounting holes in stone counter top.
  • Suitable for marble, ceramic tile, vitrified tile, floor tile, full tile, stone, jade, microcrystalline stone.
Check Stock

Masonry Drill Bit Set, 5Pcs Concrete Drill Bits Set for Tile, Brick, Glass, Plastic and Wood, Tungsten Carbide Tip Drill Bits for Wall Mirror and Ceramic Tile in Size 3/16, 1/4, 5/16, 3/8, 1/2inch

  • 【UNIQUE DESIGN MASONRY DRILL BIT】Our concrete drill bits is designed by unique cross angle and U-shaped drain groove, fast smoother drilling, which is great for drilling holes on the glass, ceramic, tile, mirror, plant pots, wood, porcelain, brick wall, marble, thin iron plate etc. Also it is easy to remove chips when working..
  • 【QUALITIED MATERIALS of CONCRETE BITS】The concrete drill bit is made of premium carbide YG6X alloy, higher hardness, more wear-resistant than ordinary tile drill bits, and a reinforced head prevents drill bits cracking and provides a longer life. Also 1/4” Hex Shank fits into all power tools more easily and securely..
  • 【WIDELY USEAGE of TILE DRILL BITS】 The masonry drill bits can drill different holes on the GLASS, CERAMIC, TILE, MIRROR, PLANT POTS, WOOD, PORCELAIN, BRICK WALL etc, Please try to keep the drill vertical and remember to add Water or coolant when drilling..
  • 【ALL YOUR NEED IN ONE SET】The glass drill bit comes with a storage box, which includes 5pcs tile drill bit in size 3/16, 1/4 , 5/16, 3/8 , 1/2inch, you can drill various holes by this portable tools, which can meet your the daily needs of your home DIY work..
  • 【100% QUALITIED AFTER-SERVICE】We are confident with the quality of concrete bits, If ....
Check Stock

uxcell 2 Pcs 25mm Diamond Coated Hole Saw Drill Bits for Glass Ceramic Tile Marble Rock Porcelain

  • SIZE - 25mm(1-inch) Drilling Diameter, 8mm(0.31-inch) Shank Diameter, Drilling Depth: 28mm.
  • DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp..
  • NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance..
  • SPECIAL DESIGN - Slotted edge makes it more sharp, works more efficient. Side open can remove the waste to keep the drill bit clean..
  • APPLICATIONS - Perfect for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, light stone and fiberglass. (Need to be used at a low speed.
  • Always use lubrication (water) when processing, otherwise the hole saw will burn.).
Check Stock

uxcell 2pcs 35mm Diamond Drill Bit Hole Saw for Watt Glass Marble Fiberglass Ceramic Tool

  • Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws..
  • Nickel plating on these bits maximizes your tools life with great resistance to corrosion..
  • Side holes allow for easy slug removal after drilling..
  • Suitable for cutting accurate holes on glass, ceramics, porcelain, ceramic tile, porcelain tile etc.. Not suitable for drilling tempered glass, plastic and wood..
  • Please use at low drill speeds and drill pressure. Always work with coolant (water) when drilling. Not suited for use on concrete or for depths beyond about 1/2 inch..
Check Stock