Categories

Best Drill And Reamer Combination Set

04529 for PPRK6 Plastic Pipe Fitting Reamer 6 Piece Kit fit into standard 1/2" drills PVC pipe reamer tool Contains PPR75, PPR100, PPR150, PPR200, PPR300 and PPR400

  • 【Scope of application】：PPR reamer is applicable to exhaust pipe, drain pipe and water pipe, and is used to clean residual pipes and solvent cement residues on PVC, CPVC or ABS fittings, Reduce labor time and materials costs by reusing the fittings..
  • 【Set combination】：Kit with PPR75, PPR100, PPR150, PPR200, PPR300, PPR400, 6 Piece,Fits into standard 1/2 inch drill.Shaft Size: 3/8" hex..
  • 【Advantage】：Its carbide cutting insert provides a cutting edge on each side.Rotate before replacement and receive three bonus cutting edges.Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems..
  • 【Professional customization】: Specially designed for North American pipe diameters, So they as they fit specific ID/OD for reaming work.It is made of the latest hard alloy with high strength,high precision, durability and long service life. The surface is not easy to rust after coating treatment..
  • 【100% Satisfaction Guarantee】: Your satisfaction is ou....
Check Stock

.196\ Diameter Carbide Tipped Chucking Reamer, 56551960

  • Chucking Reamer: Size: 4mm, 5mm, 6mm, 8mm, 10mm.
  • tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications.
  • Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
  • Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
  • Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
  • How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check Stock

Wood Splitter Drill Bit, zosenda Heavy Duty Log Splitter Screw Cone, High Speed Firewood Twist Drill bit, Screw Splitting Bit Wood Breaker Wedge Drilling Woodworking Tool (38mm)

  • RAPID AND CLEAN DRILLING: With a combination of high strength material and superior craftsmanship for optimal drilling performance, this screw cones drill for quick separation of log with minimal effort. The pointed head and anti-slip groove design help prevents slippage and improves efficiency..
  • SUPER EASY TO USE: Heavy duty firewood twist drill bit is exquisitely designed with triangle shank to ensure stable clamping. Just install the drill bit into the power drill and drill the wood, and the firewood will be spiltted easily with its optimal hardness and strength..
  • WIDE APPLICATIONS: This versatile wood splitter hand tool works great for splitting tough oak, hickory, walnut and so much more. Widely applicable to home, outdoor, camping, farms to save time and effort when split firewood easily..
  • STURDY AND DURABLE: Made of premium quality manganese titanium with glossy black painted finish, the professional replacement screw wood cone reamer is extra strong and durable for extended use. Perfect split drilling hand tools to makes woodworking much easier and faster.
  • BUY WITH CONFIDENCE: Our splitting wood cone drill bit is backed by a 12-month hassle-free warranty and a 30-day money-back guarantee. Please feel free to contact our customer support if you ha....
Check Stock

7-Piece HSS Chucking Reamer Set, 1/8 Inch - 1/2 Inch

  • Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm.
  • tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications.
  • Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
  • Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
  • Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
  • How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check Stock

5/8 Bridge Reamer Bridge/Construction Reamer 1/2 Shank M2 HSS Taper Chucking Reamer Bit Tool for Steel Metal Alloy Wood Plastic Drilling Hole

  • Material: 5/8 bridge reamer is made of high-quality M2 HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life. Compared to other commonly used low-grade high-speed steels, M2 has an increased content of tungsten and molybdenum, both key elements for improved durability.
  • Wide Application: HSS bridge reamers can enlarge or align existing holes and are suitable for various materials such as aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, steel and other structural materials Note: It requires existing holes Or a pilot hole is required.
  • Size Infor: Length of chucking reamer is 6.5 inch.
  • Safe to Use: Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to prevent over-penetration and loss of operator stability.
  • Design: The tapered tip design allows the reamer to fit into unevenly overlapping holes, aligning the bolt holes. The 5/8" bridge reamer is not a drill, it just aligns the reamer with the pre-drilled hole.
Check Stock

0-14mm Body Reamer Hole Puncher Straight Scissors and Curved Scissors Set Universal Tool for RC Car Body Shell Hobby Repair Tools

  • Material: High quality steel with super hardness,durable and exquisite-crafted..
  • Scissor: Stable and solid, hard to deform, curved blade designed to cut body shell at ease, saving time and effort..
  • Reamer: Slip-resistant designed reamer handle and optimal shaped drill for comfortable grip and easy operation..
  • Application: Necessary tools to punch holes and trimming lexan plastic body shell drills of rc hobby car quadcopter helicopter boat airplane can opies....
  • Package: 1 curved tip scissor + 1 standard scissor + 1 body reamer w/sleeve. 100% brand new and high quality guaranteed..
Check Stock

Accusize Industrial Tools 9/16'' H.S.S. Aligning Reamer with 3/4'' / 0.75'' Weldon Shank, Spiral Flute, 0521-0916

  • HSS reamer has a specially designed cutting geometry that is designed to allow this aligning reamer.
  • Used in a magnetic drill which has ¾” Weldon shank..
  • The unique multi-flute design for a fast smoother cut and better finishing..
Check Stock

T-Handle T Type Tap Wrench Set of 3 Pieces Solid Collet Jaws

  • T-Handle Tap Wrench Solid Jaw 3 Piece Set.
  • Set of 3 Piece - Jaw Opening Ranges 1/16" to 5/32", 5/32" to 1/4" & 1/4" to 1/2".
  • The knurled cap on the jaws gives you the freedom to tighten the jaws to grip the tap, reamer, drill like a vice for a wide variety of applications.
  • Unused PartsDesigned for Use with Taps, Reamers, Screw Extractors, & Other Tools with Square Shanks Works the Same.
Check Stock

uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H7 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm) 10pcs

  • 【High working efficiency】: This chucking machine reamer set has sharp cutting-edge, high efficiency cutting ability, high accuracy, so your work will become easier under the use of this tools set. Also, this set has a long-term using service life.
  • 【High quality materials】: This set of cutter milling reamer is made of high quality and high speed steel materials, so these reamer cutters have high hardness.
  • 【Specific and professional use】: This steel milling cutting tool set is designed for reaming to mold processing and handicraft processing.
  • 【Wide using range】: This whole chucking reamer set can be widely used for bore machining, installed in drilling machine, milling machine, etc.
  • 【Fine process】: This set of chucking reamer tools' surface has processed by iron, plastic, wood, copper, aluminum and other soft materials.
Check Stock

Viking Drill and Tool 12270 CR-4SP 4 piece Set Type 50-UB Standard Flute Magnum Super Premium Car Reamer

  • 4 pc. Set Premium High Speed Steel Car Reamer Standard Flute 3-Flats on Shank.
  • Includes: 3/8, 1/2, 5/8, 3/4 straight flute reamer.
  • Reamers designed for enlarging previously formed or drilled holes.
  • 4 pc. Set, HSS Car Reamer Standard Flute 3-Flats on Shank.
Check Stock

HOUNDSBAY Bulldog Heavy-Duty Shoe Stretcher for Women | Loosens Tight Shoes with Strong Wood & Metal Construction Women’s Small / 3.5-5.5 US

  • 4 pc. Set Premium High Speed Steel Car Reamer Standard Flute 3-Flats on Shank.
  • Includes: 3/8, 1/2, 5/8, 3/4 straight flute reamer.
  • Reamers designed for enlarging previously formed or drilled holes.
  • 4 pc. Set, HSS Car Reamer Standard Flute 3-Flats on Shank.
Check Stock

30 Flexible Drill Bit Extension Hex Shank Rotatable Joint Socket 1/4, 3/8, 1/2 Inch Hex Adapter Socket Bendable Drill Bit Extension Screwdriver Drill Bit Holder 105 Degree Angle Drill Tool

  • Rich combination: you will receive 1 bendable drill bit extension, 3 socket adapter sets (including 1/ 4 inch, 3/ 8 inch and 1/ 2 inch ), 3 pieces 360 degree rotatable joint swivel sockets (including 1/ 4 inch, 3/ 8 inch and 1/ 2 inch ), 10 short screwdriver bits, 1 piece 105 degree right angle drill extension, 1 socket wrench, 3 magnetic screwdriver bits and 8 hex shank impact driver socket adapters, nice combination for daily using and replacement.
  • Nice rocket adapter set: socket adapters set, 360 degree rotatable power drill adapters set and power drill sockets adapter set, each set come with 1/ 4 inch, 3/ 8 inch, 1/ 2 inch, each with a 1/ 4 inch hex drill bits, widely applied in the installation of electric screwdriver, manual screwdriver and other installation for the hexagonal tool.
  • Applicable for standard 1/ 4 to 3/ 4 inches and metric 7 to 19 mm/ 0.3 to 0.7 inches screws.
  • Flexible twisted and rotated: flexible drill extension kit and bendable drill bit extension can be twisted and rotated at different angles, which can be attached to a drill, a charging bit or a manual wrench, thus work efficiency can be improved and productivity can be increased.
  • Broad utilization: this impact socket adapter set is applicable for light drilling, slow speed or s....
Check Stock

Beer Tap Faucet Handle Black - Set of 10

  • WHAT WILL YOU GET - You will get a M3-M12 tap wrench. Fit 1/16" - 1/2" / 2.5mm - 12mm capacity size. Overall size(closed) is 19.3cm x 2.3cm x 1cm/7.6inch x 0.9inch x 0.4inch(LxWxH). Shank diameter is 8mm/0.3inch..
  • HIGH QUALITY TAP REAMER - The adjustable tap wrench is made of high-quality steel, with high hardness, strong wear resistance and long service life. The end of the tapping wrench tool is knurled for easy and firm grips. The hand wrench tool has one rigid handle and one adjustable jaws, which can easily and firmly clamp the tools..
  • MULTIPLE USE - The tap reamer wrench is designed for use with small tools that require manual rotation, such as taps, reamers, drill bits, and screw extractors. Manual operation is very simple and convenient, which can improve your work efficiency. It is also very suitable for DIY tapping..
  • EASY TO USE - When using a tapping wrench, apply even force with both hands. The wrench and the tap should form a 90-degree angle, and the tap and the threaded bottom hole are perpendicular to each other, rotate the adjustable metal tap handle reamer wrench in a certain direction..
  • QUALITY SERVICE - Thank you very much for your support. Piutouyar provides 30 days return and exchange service. Customer 100% satisfaction is our top pr....
Check Stock