Categories

Best Drill Bit For Cabinet Hardwares

35mm Concealed Hinge Jig Boring Hole Drill Guide Cutter Bit Set Door Boring Hole Template and Bit for Cabinet Door Installation for Tool Carpenter.(Yellow)

  • Yellow 35mm Concealed Hinge Jig Boring Hole Drill Guide Cutter Bit Set Door Boring Hole Template and Bit for Cabinet Door Installation for Tool Carpenter..
  • Made of engineering plastic, This is a set of guide tool for installing concealed hinges very accurate..
  • This punch temporarily supports 46-47-48-52 mounting screw holes..
  • The hinge opening is suitable for 35mm hinges..
  • Make cabinet door installation easy. Get drill press accuracy with any hand drill..
Check Stock

Kipokalor 35mm Concealed Hinge Jig Boring Hole Drill Guide Cutter Bit Set Door Boring Hole Template and Bit for Cabinet Door Installation for Tool Carpenter (Blue)

  • Blue 35mm Concealed Hinge Jig Boring Hole Drill Guide Cutter Bit Set Door Boring Hole Template and Bit for Cabinet Door Installation for Tool Carpenter..
  • Made of engineering plastic, This is a set of guide tool for installing concealed hinges very accurate..
  • This punch temporarily supports 46-47-48-52 mounting screw holes..
  • The hinge opening is suitable for 35mm hinges. Make cabinet door installation easy. Get drill press accuracy with any hand drill..
Check Stock

Kitchen Cabinet Pulls Installation Jig Drill Mounting Template for Cabinet Knobs Cabinet Handles Drill Template Guide for Drawer Pulls Cabinet Hardware Installation Template Kit Include Drill Bit

  • Application Hole Center:Cabinet hardware with 2.5"(64mm) 3"(76mm) 3.5"(90mm) 3.75"(96mm) 4"(102mm) 4.5"(115mm) 5"(128mm) 6.25"(160mm) hole centers.
  • The wide size scope of application can satisfied what you different needs..
  • What's included:1pc cabinet door drilling Template, 1pc Drawer Drilling Template, and 1pc 3/16" Drill Bit..
  • Easy Installation: The mounting template will help install cabinet pulls fast and easily. Clear measurement lines ensure drilling accurate installation holes. Find one of the pre-defined hole centers which worked best for your pulls, use a pencil to circle it, and it was easy to mark a drilling spot on all of the cabinets with a pencil..
  • Drill Fearlessly: Once you've marked the hole center, fit the 3/16" drill bit into your drill, but make sure the screws are 8/32" firstly. And be sure to drill from front to back. If you do have splintering, it will be on the inside where nobody can see it..
  • Our Guarantee: Your satisfaction is our pursuit. If you have any problem, please feel free to contact us, w....
Check Stock

Hinge Jig Drill, 35mm Concealed Hinge Jig Boring Hole Drill Guide Cutter Bit Set Door Boring Hole Template and Bit for Cabinet Door Installation

  • 【High Quality Material】Made of high quality engineering plastic, this hinge hole drill guide are durable.
  • 【Convenient Drill Tool】This is a set of drill guide tool used for convenient hinge hole drilling, allows you to drill cup holes for concealed cabinet door hinges.
  • 【Convenient for Using】With this drill guide, you can drill hinge holes conveniently and fast, hole position is accurate, no need to draw lines, suitable for 35mm hinge.
  • 【High Accuracy】Reliable drilling with bit guide and stop collar. Make cabinet door installation easy! Get drill press accuracy with hand drill.
  • 【SHIPPING】This item will ship from USA ,delivery time need about 4-7 days.
Check Stock

Facilehome Wall Mount Ironing Board Cabinet,Built in Swivel Ironing Board Foldable with Storage,Wall Hanging with Mirror,White

  • ...g ironing clothes to be a easier thing..
  • 【Ironing Board Station with Storage】- This recessed ironing board cabinet has 3 storage shelves for accessories and small iron,2 hanging hooks to hang clothes..
  • 【Easy installation】- Measure the distance on wall,Drill two holes and mount vertically to wall,Including all hardwares and Installation Instruction,hideaway ironing board cabinet is fully assembled..
  • 【Decorative Mirror】- Delicate white modern wall mounted cabinet body and the premium silver glass.can work well with any type of room to create the illusion of a wider space..
  • 【Space Saver】- Compact Wall Mounted Design,The foldable wood ironing board hides away in ironing board cabinet,fold up & down the ironing board to save space.Very ideal for ironing in small space,tight apartments,sewing room,laundry room,bedroom,RVs,pantry room and more..
  • 【Adjustable Height】- This in-wall ironing board cabinet can be mounted high or low height,determined by these studs you mount it in..
  • 【Excellent Service】- Professional folding ironing board cabinet manufacturer,provide professional customer service before and after purchase..
Check Stock

Kreg KMA3225 Shelf-Pin Jig 1/4' (6 mm)

  • Two edge alignment knobs position the cup hole from the edge of the door, while the edge pin sets the distance from the top/bottom..
  • The drill guide with metal bushing locks into jig and creates a perfectly straight hinge cup hole.
  • Guide bushings built into body of drilling jig leta you pre-drill pilot holes in 4 common locations, making sure hinges are straight and door closes true. The 1/16″ diameter drill bit for pilot holes is included..
  • Easily set your cup hole depth on the included 35mm drill bit using the built-in depth setting fixtures on the left and right side..
  • The hinge marking guide detaches from bottom of jig and allows you to transfer and mark center lines and hinge location to cabinet wall or frame.
Check Stock

VEVOR Drill Bit Dispenser Cabinet, Five-Drawer Drill Bit Dispenser, 60-Compartment Drill Bit Organizer Cabinet, Drill Dispenser Organizer Cabinet Holder for Jobber Length Wire Gauge Sizes #1 to #60

  • ... Storage Organizer: This five-drawer 60-compartment drill bit dispenser can easily store collections of drills. It holds drill bits in sizes of #1-60. The labeled compartments provide quick identification and organization..
  • Robust & Sturdy Material: The drill dispenser cabinet is constructed from thickened (0.04"/1 mm) cold-rolled steel, with a clean paint finish to create an appealing gloss and high strength surface. The electroplating process creates a warp-proof, rust-proof, and corrosion-proof surface..
  • User Experience: Our drill bit dispenser’s ball-bearing design features easy drawer slides to ensure a long useful service life, making the drawer pull smoothly. Widened handles and smooth edges without burr are convenient for griping. Never get butter fingers.
  • Stack it up: Units can be stacked with other wire gauges/letter/metric dispensers. With this user-friendly feature, you could save precious storage space. Just stack it up or use it individually according to your working environment..
  • Ultimate Versatility: Our cutting tool organi....
Check Stock

AUH Cabinet Clamps, Cabinet Claw Tools with Two Side Screws and Alignment Plate Cabinetry Face Frame Pair 2 Pack Red for Woodworking Punching, Cabinets Installation

  • Cabinet Clamp Dimensions- Fit for stiles from thick 2inch and 4.38 inch width.
  • Drill bit 1/8”, Drill hole 1/4”, Max load capacity 440 lbs. Great Dimensions for most cabinet face frame pair.
  • Premium Material-Cabinet claw is made of origin steel and with special E-Coating and powder coated on face. Dual coating will effectively improve corrosion resistance and rust-proof.
  • Protective Pad- The Face Frame Pair was coated by fleece cloth protective pad, which can protect the surface of wooden furniture well.
  • Easy to Installation-This wooden clamp can be easy to tighten and align the two frames on one face. With drill guide holes, it is easy to drill holes and screw screws at on positions.
  • Widely Application- This cabinet clamp is also absolutely suitable for all types of cabinets. Can keep them level and vertical, even if you are not a professional installer, it will help you get the job done efficiently.
Check Stock

VEVOR Drill Bit Dispenser Cabinet, Three-Drawer Drill Bit Dispenser, Drill Bit Organizer Cabinet Cold Rolled Steel, 27-Compartment Drill Dispenser Organizer Cabinet Holder for Letter Sizes A to Z

  • ...t Storage Organizer: This three-drawer 27-compartment drill bit dispenser can easily store collections of drills. It holds drill bits in sizes of A-Z. The labeled compartments provide quick identification and organization..
  • Robust & Sturdy Material: The drill dispenser cabinet is constructed from thickened (0.04"/1 mm) cold-rolled steel, with a clean paint finish to create an appealing gloss and high strength surface. The electroplating process creates a warp-proof, rust-proof, and corrosion-proof surface..
  • User Experience: Our drill bit dispenser’s ball-bearing design features easy drawer slides to ensure a long useful service life, making the drawer pull smoothly. Widened handles and smooth edges without burr are convenient for griping. Never get butter fingers.
  • Stack it up: Units can be stacked with other wire gauges/letter/metric dispensers. With this user-friendly feature, you could save precious storage space. Just stack it up or use it individually according to your working environment..
  • Ultimate Versatility: Our cutting tool organi....
Check Stock

1/4\ Hex Shank 105 Degree Right Angle Driver Angle Extension Power Screwdriver Drill Attachment Socket Adapter Bit + 3pcs Quick Release Magnetic Screwdriver Nut Drill Bit Holder Extension Kit Set

  • APPLICATION - Since this drill bit extension is flexible and bendable, it can be mainly used in dead ends or narrow space where common screwdriver can't work..
  • USED FOR - This flexible shaft extension bit can be used for hardware repair like electrical cabinet, electrical appliance, computer chassis and etc..
  • COMPATIBLE WITH - With 1/4 inch hexagon hex shank, the bit extension compatible with both hand drill and electric drill like cordless screwdriver, low speed DC hand drill, electric screwdriver and etc..
  • DURABLE QUALITY - Be made of high carbon steel and plastic, this extension bit is durable and reliable..
  • 3 DIFFERENT LENGTHS - Comes with 5 pieces of extension bits, 2 of them are 11.8 inch / 300mm long, another 2 of them are 9.8 inch / 250mm long and 1 of them is 7.9 inch / 200mm long, which can meet all your needs..
Check Stock

QWORK Vix Bits Self Centering Clic Change Door Hinge Drill Bit Set High-speed steel, 5/64', 7/64', 9/64', 11/65', 5mm, 13/64', 1/4'(BLACK)

  • 1) Drill bit size: 5/64", 7/64", 9/64", 11/64", 5mm,13/64", 1/4".
  • 2) Self-centering function of drill bit for precise positioning and drilling without walking arround.
  • 3) Clic-Change design of 1/4" hex shank (6.35mm), fast, one-handed load and release of bits.
  • 4) Sawdust will be automatically discharged from the top of the holes on both sides，without drill blocked..
  • 5) Aluminum alloy shell, drill core made of 4241 high-speed steel. Harder and sharper. It can drill cabinet and door hinge guide holes faster..
Check Stock

VEVOR Drill Bit Dispenser Cabinet, Three-Drawer Drill Bit Dispenser, Drill Bit Organizer Cabinet, Drill Dispenser Organizer Cabinet for Jobber Length Fractional Size 1/16" to 1/2" in 1/64" Increments

  • ...dispenser can easily store collections of drills. It holds drill bits in sizes of 1/16"-1/2"(1.59-12.7 mm) in 1/64"(0.4 mm) increments. The labeled compartments provide quick identification and organization..
  • Robust & Sturdy Material: The drill dispenser cabinet is constructed from thickened (0.04"/1 mm) cold-rolled steel, with a clean paint finish to create an appealing gloss and high strength surface. The electroplating process creates a warp-proof, rust-proof, and corrosion-proof surface..
  • User Experience: Our drill bit dispenser’s ball-bearing design features easy drawer slides to ensure a long useful service life, making the drawer pull smoothly. Widened handles and smooth edges without burr are convenient for griping. Never get butter fingers.
  • Stack it up: Units can be stacked with other wire gauges/letter/metric dispensers. With this user-friendly feature, you could save precious storage space. Just stack it up or use it individually according to your working environment..
  • Ultimate Versatility: Our cutting tool organi....
Check Stock

VEVOR Drill Bit Dispenser Cabinet, Five-Drawer Drill Bit Dispenser, 1/2" Reduced Shank Drill Bit Organizer Cabinet, Drill Dispenser Organizer Cabinet for Sizes 33/64" to 63/64" in 1/64" Increments

  • ...enser can easily store collections of drills. It holds drill bits in sizes of 33/64" to 63/64"(13.1-25 mm) in 1/64"(0.4 mm) increments. The labeled compartments provide quick identification and organization..
  • Robust & Sturdy Material: The drill dispenser cabinet is constructed from thickened (0.04"/1 mm) cold-rolled steel, with a clean paint finish to create an appealing gloss and high-strength surface. The electroplating process creates a warp-proof, rust-proof, and corrosion-proof surface..
  • User Experience: Our drill bit dispenser’s ball-bearing design features easy drawer slides to ensure a long useful service life, making the drawer pull smoothly. Widened handles and smooth edges without burr are convenient for griping. Never get butter fingers.
  • Stack it up: Units can be stacked with other wire gauges/letter/metric dispensers. With this user-friendly feature, you could save precious storage space. Just stack it up or use it individually according to your working environment..
  • Ultimate Versatility: Our cutting tool organi....
Check Stock