Categories

Best Drill Bit For Hard Steel

16" x 4" Upgraded Auger Drill Bit with Sharp Thickended Blades and Tungsten Steel Cemented Carbide - Ice Augers for Ice Fishing Intensive Blades for Planting for 3/8" Hex Drive Drill

  • 【Sharp Thickended Blades】Compared to other similar products,we are the first to add two Blades on the Auger Drill Bit.These blades are made of 65 high strength manganese steel,which is very hard and sharp,so that the drilled hole can be kept very intact.With the help of Blades,you can not only improves the efficiency of drilling mud, but also can drill holes on ice with great ease..
  • 【Tungsten Steel Cemented Carbide Twist Drill Bits】We use a solid twist drill as the drill bit, which can bring a greater impact on the soil. This twist drill is made of Tungsten Steel Cemented Carbide, which makes it very easy to drill holes in hard soil, gravel soil and ice..
  • 【Specification】4 inch diameter x 16 inch length. Work with most 3/8" or larger chucked drill..
  • 【For Ice Fishing】 The upgraded auger drill bit not only can work on hard soil and little rocky soil for all plants in the garden,but also can dig holes on ice. It is very suitable for ice fishing enthusiasts due to its professional design and lightweight..
  • 【30 Day No Risk Guarantee】This product is equipped with a....
Check Stock

FTG USA Countersink Drill Bit Set 3 Pc #10 (3/16') Wood Countersink Drill Bit Same Size Set Countersink Tapered Countersink Bit, Quick Change Shank, 1 Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 3 Piece drill set All Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2348 drill bit set hex shank.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
Check Stock

FTG USA Countersink Drill Bit Set 6 Pc #10 (3/16') Wood Countersink Drill Bit Pro Pack Countersink Set, Tapered Countersink Bit, 1 Stop Collar, Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 6 Piece Pro drill set Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Depth Stop Collar 3/8", 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2350P counter sinker drill bit for wood.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits desi....
Check Stock

JEFE HEX 115 PCS HSS Cobalt Drill Bit Set, Twist Jobber Drill Bits Set, 135-Degree Split Point, Fractional 1/16"-1/2", Letter A - Z, Wire #1 - #60 with Metal Indexed Storage Case

  • DRILL BITS SIZE: Jefe Hex 115 pcs set includes 29 pcs fractional sizes from 1/16" to 1/2" by 64ths increments.
  • 60 pcs wire sizes from #1 to #60. Almost cover all sizes you would use..
  • COBALT JOBBER DRILL BITS:115 pcs high speed steel with 5% cobalt drill bit set can resist high heat abrasion while drilling. M35 cobalt HSS twist drill bits is more suitable for hardened working material. Particularly adapt to drilling stainless steel, cast iron, high temperature alloy, titanium alloy and even hard plastics, and woods. Can also be used for soft materials..
  • TWIST DRILL BITS: Premium HSS with 5% Cobalt and 135° split point drill tip design guarantee 115 pcs drill bit keeping sharpness while drilling hard materials and prevent tips walking on the working surface. Proper twist and flute design clears chips and particles fast..
  • WIDE APPLICATION: Jefe Hex 115 pcs set with sharp and hard cutting edge is ideal for versatile application especially for projects made from hard material, such as kitchen utensils, machine parts, medical equipment, DIY projects and so on..
Check Stock

13 PCS Metric M35 Cobalt Steel Twist Drill Bit Set HSS Extremely Heat Resistant with Straight Shank to Cut Through Hard Metals Like A Hot Knife Through Butter,Such as Stainless Steel,Titanium Alloy

  • ✅ Faster Cutting and Longer Life— Our Twist Drill Bit HSS are Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to 12 times when compared with an average HSS drill bit..
  • ✅ No Center Punch Is Needed—The 135° Quick-Cut points are self-centering and penetrate quickly with less pressure. Twist drill bit kit Will not "walk" or "wander".
  • ✅ Extremely Heat Resistant — twist drill bits Must be used and operated at 1500 RPM or greater for maximum efficiency. Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks.
  • ✅ Metal Cutting — Drilling Steel, Stainless Steel, Hard Metal and Iron.Particularly successful in cutting through hard metals such as hard metal ,stainless steel and cast iron, although they can be used for softer materials, too.
  • ✅ Easy Usage And Store —The set includes 13pcs of M35 cobalt steel twist drill bits: 1.5mm, 2mm, 2.5mm, 3mm, 3.2mm, 3.5mm, 4mm, 4.5mm, 4.8mm, 5mm, 5.5mm, 6mm, 6.5mm,13Pcs Packed in a Plastic Bag For Easy Usage And Store.
Check Stock

This is Not A Drill Funny Carpenter Woodworking Mens T-Shirt

  • FTG 4TO12P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • Bits Secured with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood....
Check Stock

Auger Drill Bit 3x12inch Garden Auger Spiral Drill Bit Rapid Planter for 3/8" Hex Drive Drill - for Tulips, Iris, Bedding Plants and Digging Weeds Roots

  • Build to last: Made of heavy duty steel, with glossy black painted finish. The auger drill bit point on it hits the ground first and keeps it steady when you are digging hard grounds. Our patented design also makes the distance between the digging blade start and the point is the minimal, so auger drill bit will start working on hard ground without having to push down..
  • Size: 0.3 inch (8mm) steel shaft with non-slip hex drive 0.3inch(8mm).
  • 3-inch (8cm) diameter x 12-inch (30cm) length.Quickly digs holes up to 12 inches deep and 3 inches wide using the power of your hand held drill..
  • Save your time & Easy to use: our earth drill bit will work with any 3/8″ or larger chucked drill, 18V or greater drill recommended. Plant hundreds or just a few bulbs in minutes.For cordless drills a minimum 14V drill is recommended.
  • Keep auger clean from soil and debris when not in use..
  • Multi-Purposes: our spiral hole drill is the best landscapers’ choice for increasing efficiency when planting bulbs, potted plants, vegetables, flowers, bare root trees and shrubs, tilling soil or planter boxes, mixing seed, soil, fertilizer, paint, or batches of mortar mix for hardscapes.
  • Our earth drill bit is also effortlessly dig post holes or even bring it on vacatio....
Check Stock

Auger Drill Bit for Planting 2x24 inch,Extended Length Garden Auger Spiral Drill Bit for Planting Bulbs Flowers Planting Auger for Drill Post Hole Digger for 3/8\Hex Drill

  • Build to last: Made of heavy duty steel, with glossy black painted finish. The auger drill bit point on it hits the ground first and keeps it steady when you are digging hard grounds. Our patented design also makes the distance between the digging blade start and the point is the minimal, so auger drill bit will start working on hard ground without having to push down..
  • Size: 0.3 inch (8mm) steel shaft with non-slip hex drive 0.3inch(8mm).
  • 2inch (5cm) diameter x 24inch (60cm) length.Quickly digs holes up to 24 inches deep and 2 inches wide using the power of your hand held drill..
  • Multi-Purposes: our spiral hole drill is the best landscapers’ choice for increasing efficiency when planting bulbs, potted plants, vegetables, flowers, bare root trees and shrubs, tilling soil or planter boxes, mixing seed, soil, fertilizer, paint, or batches of mortar mix for hardscapes.
  • Our earth drill bit is also effortlessly dig post holes or even bring it on vacation to drill a hole in sand to anchor your beach umbrella.It will be a good helper for you..
  • Save your time & Easy to use: our earth drill bit will Work with MOST 3/8" or larger chucked drill, we recommend using electric drill with ADJUSTABLE DRILL MOUTH, so you will no need to worry about if the auger dr....
Check Stock

FTG USA Wood Countersink Drill Bit Set 6 Sizes Set Countersink HSS M2 Tapered Drill Bits, Quick Change Hex Shank Countersink bit, 2 Stop Collar, 1 Allen Wrench, Countersink Drill Bit for Woodworking

  • Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 6 sizes drill bits with countersink #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32"), #14 (1/4") Adjustable wood countersink, 2 Depth Stop Collar, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs sizes 1/2" and 3/8". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills.
  • Wood drill bit set with adjustable 4 Flute Cutter counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2341P tapered countersink drill bits.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to dri....
Check Stock

MACXCOIP Cobalt Drill Bit Set, 115Pcs M35 High Speed Steel Bits for Hardened Metals, Stainless Steel, Cast Iron and Wooden Plastics, with Metal Index Storage Box

  • [Various Sizes] 115 sets of drill bits include 29pcs Fractional Size:1/16” to 1/2” in 1/64th increments.
  • [M35 Cobalt Drill Bit] The M35 cobalt drill bit is a durable, sharp and robust drill bit suitable for cutting stainless steel, iron castings, copper, aluminum and other soft metals as well as plastics, wood etc..
  • [Quick and Efficient] The cobalt drill bit set can be used effectively on most soft and hard objects, with a 135 degree point tip and twist design for faster cutting, self-centering to prevent walk-off and faster chip and particle removal..
  • [HSS Drill Bit Set] HSS cobalt drill bit set for hardened steel with excellent cutting performance. 115 sets of drill bits for long term use. The inserts are hardened and polished for improved sharpness and precise cutting without wobbling..
  • [Easy Storage] The drill set includes drill holders with size indexes and is packaged in a small, strong package for easy storage and sorting. If you have any questions, please feel free to contact us and we will be happy to help you....
Check Stock

TCBWFY Auger Drill Bit 4x12inch Garden Plant Flower Bulb Auger Spiral Hole Drill Rapid Planter Earth Auger Bit Post or Umbrella Hole Digger for 3/8"Hex Drive Drill

  • Build to last: Made of heavy duty steel, with glossy black painted finish. The auger drill bit point on it hits the ground first and keeps it steady when you are digging hard grounds. Our patented design also makes the distance between the digging blade start and the point is the minimal, so auger drill bit will start working on hard ground without having to push down..
  • Size: 0.3 inch (8mm) steel shaft with non-slip hex drive 0.3inch(8mm).
  • 4inch (10cm) diameter x 12-inch (30cm) length.Quickly digs holes up to 12 inches deep and 4 inches wide using the power of your hand held drill..
  • Save your time & Easy to use: our earth drill bit will work with any 3/8" or larger chucked drill, 18V or greater drill recommended. Plant hundreds or just a few bulbs in minutes.For cordless drills a minimum 14V drill is recommended.
  • Keep auger clean from soil and debris when not in use..
  • Multi-Purposes: our spiral hole drill is the best landscapers’ choice for increasing efficiency when planting bulbs, potted plants, vegetables, flowers, bare root trees and shrubs, tilling soil or planter boxes, mixing seed, soil, fertilizer, p....
Check Stock

10PCS 1/4 Inch carbide drill Tile Glass bit for Glass, Concrete, Marble, Plastic, Brick, Tile, Wood and Cement,etc

  • 【HIGH HARDNESS, DURABLE】High quality Tungsten carbide, and carbide with a reinforced head that prevents bit cracking and provides a longer life,the hardness is higher than the ordinary drill bit..
  • 【UNIQUE DESIGN】One drill bit replaces two drill bits (1 x glass & tile drill bit + 1 x Masonry drill bit), can easily drill holes on tile, concrete, brick, glass, ceramic, plastic, wood, etc.The U type slot design brings fast drilling dust remove, and 3-flats shank allows drill bit easy plug and to be held tightly..
  • 【WIDE APPLICATIONS】Spear pointed design strong tungsten carbide tip can easily penetrate various material, suitable for masonry wall, cement wall, concrete, tile, wood, metal, stainless steel, aluminum alloy, wood, bubble brick, etc..
  • 【10-PIECE DRILL BIT SET】The package includes 10pcs 1/4 Inch (6mm) glass and tile drill bits and a plastic storage box, easy to carry..
  • 【NOTE】When drilling hard material (glass, porcelain floor tile, marble or granite), please use water for lubrication..
Check Stock

FTG USA Wood Countersink Drill Bit Set 5 Pc Countersink Drill Bit #4 6 8 10 12 Tapered Drill Bits with Improved Connection Drill Bit with 1/4 Hex Shank and Allen Wrench,

  • Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set....
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable....
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with....
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wider....
  • Counter sinker drill bit set designed in New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report....
Check Stock