Categories

Best Drill Bit Reamer

Klein Tools 85091 Power Conduit Reamer with Improved Bit Retention, 1/2-, 3/4- and 1-Inch

  • Power Conduit Reamer reams 1/2-Inch (13 mm), 3/4-Inch (19 mm) and 1-Inch (25 mm) conduit and install fittings in a fraction of the time.
  • Reduce time on projects with large quantities of conduit runs.
  • Designed to fit into power drill chucks and quick release adapters with improved bit retention.
  • Includes precision engineered replaceable reaming blade.
  • Replacement blades (SKU #19353) are available and the only approved blade for use in our tool.
  • Designed to be used on Electrical Metallic Tubing (EMT).
Check Stock

COOKDUO Juice & Strain - Lemon reamer w/seed catcher (orange)

  • COOKDUO Juice & Strain - Lemon reamer with strainer/seed catcher (orange).
  • Reamer and strainer - holds lemon firmly in place for easier use while getting every last bit of lemon juice.
  • Strainer / Seed catcher keeps out the pips/seeds, easily & cleanly juice over dishes.
  • Clear strainer cup keep hands clean from oils of the lemon and snaps onto the reamer for storage.
  • Non slip handle for comfort and control, Dish washer safe, BPA free components.
Check Stock

5/8 Bridge Reamer Bridge/Construction Reamer 1/2 Shank M2 HSS Taper Chucking Reamer Bit Tool for Steel Metal Alloy Wood Plastic Drilling Hole

  • Material: 5/8 bridge reamer is made of high-quality M2 HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life. Compared to other commonly used low-grade high-speed steels, M2 has an increased content of tungsten and molybdenum, both key elements for improved durability.
  • Wide Application: HSS bridge reamers can enlarge or align existing holes and are suitable for various materials such as aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, steel and other structural materials Note: It requires existing holes Or a pilot hole is required.
  • Size Infor: Length of chucking reamer is 6.5 inch.
  • Safe to Use: Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to prevent over-penetration and loss of operator stability.
  • Design: The tapered tip design allows the reamer to fit into unevenly overlapping holes, aligning the bolt holes. The 5/8" bridge reamer is not a drill, it just aligns the reamer with the pre-drilled hole.
Check Stock

This is Not A Drill Funny Carpenter Woodworking Mens T-Shirt

  • FTG 4TO12P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • Bits Secured with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood....
Check Stock

Diamond Tile Drill Bits Ceramic Diamond Glass Drill Bit Set 5 Pack 2 Carbide Drill Bits Ceramic Tile Drill Bits 3 Porcelain Granite Drill Bits and Drill Guide for Diamond Tip Drill Bit for Bottles

  • Tungsten Carbide Drill Bit For Ceramic Tile Bits For Drill Holes In Clay Plant Pots For Drainage 3/16″ And 1/4″ Ceramic Drill Bits For Tile . Tungsten Carbide Drill Bits have Self Centering Point for Drilling Holes in Ceramic Tile Marble Travertine and Slate..
  • Diamond Drill Bits For Glass 3/16 In 1/4″ In 1/2 Inch Drill Bit For Glass Drill Set. glass Drill Bit For Bottles Half Inch Glass Drill Bit With Guide For Drilling Hole In Glass Bottles And Glass Blocks For Tree Lights. Keep These Glass Hole Saw Drill Bit For Drilling Glass Cool With Water For Extended Life..
  • For Best Results Use The Diamond Drill Bit For Porcelain And The Spear Point Ceramic Tile Bit To Drill Tile. Use Diamond Bit To Drill Glass And Carbide Tipped Drill Bits With Any Battery or Electric Drill Hole Cutter Bits Must Be Used Wet. Carbide Ceramic Tile Drill Bit Set Can Be Used Dry If No Heat Builds Up..
  • Whilst The Tungsten Tile Cutting Drill Bits Can Be Used As Porcelain Tile Drill Bit The Diamond Tile Drill Bit Will Drill Holes In Porcelain Tile Faster And Last Longer As Long As Diamond Cutting Tip Is Kept Cool. Remove Diamond Tipped Drill Bit From Tile Hole Every 10 To 15 Seconds And Dip Diamond Porcelain Drill Bit Into Cup Of Water, Also Spray Water Into Ceramic Tile Hole To ....
Check Stock

Accusize Industrial Tools 9/16'' H.S.S. Aligning Reamer with 3/4'' / 0.75'' Weldon Shank, Spiral Flute, 0521-0916

  • HSS reamer has a specially designed cutting geometry that is designed to allow this aligning reamer.
  • Used in a magnetic drill which has ¾” Weldon shank..
  • The unique multi-flute design for a fast smoother cut and better finishing..
Check Stock

FTG USA Wood Countersink Drill Bit Set 5 Pc Countersink Drill Bit #4#6#8#10#12 Countersink Bit for Woodworking, Tapered Drill Bits Secured with Pin to Hex Shank, 2 Stop Collar, 1 Allen Wrench

  • FTG 2337P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • FTG BITS SECURED with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable w....
Check Stock

FTG USA Countersink Drill Bit Set 5 Pc Countersink Drill Bit #4 6 8 10 12 Tapered Drill Bits Secured with Pin to 1/4 Hex Shank 1 Allen Wrench Counter Sinker Drill Bit Set for Woodworking

  • FTG 2337P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • FTG BITS SECURED with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable w....
Check Stock

0-14mm Body Reamer Hole Puncher Straight Scissors and Curved Scissors Set Universal Tool for RC Car Body Shell Hobby Repair Tools

  • Material: High quality steel with super hardness,durable and exquisite-crafted..
  • Scissor: Stable and solid, hard to deform, curved blade designed to cut body shell at ease, saving time and effort..
  • Reamer: Slip-resistant designed reamer handle and optimal shaped drill for comfortable grip and easy operation..
  • Application: Necessary tools to punch holes and trimming lexan plastic body shell drills of rc hobby car quadcopter helicopter boat airplane can opies....
  • Package: 1 curved tip scissor + 1 standard scissor + 1 body reamer w/sleeve. 100% brand new and high quality guaranteed..
Check Stock

wesleydrill Masonry Drill Bit Set 5 pcs 1/4"-1/2" Concrete Drill Bit Set Fit for Home DIY Building and Engineering Suitable for Electric Drill or Professional Drill

  • [Specifications and packaging]: 5 pcs Masonry Drill Bit Set.Include size: 2xMasonry Drill Bits 1/4" (6mm), 1xMasonry Drill Bit 5/16"(8mm), 1xMasonry Drill Bit 3/8"(10mm), 1xMasonry Drill Bit 1/2"(12mm), all in storage case..
  • [Fitment]: Carbide drill bits ideal for drilling faster holes in bathroom tiles, or wall mirrors, can easily drill holes on tile, concrete, brick, glass, ceramic, wood, and reduces breakout, please cooling with water and control the speed when drilling.Suitable for Home DIY, and Building/Engineering Use.Suitable for electric drill or professional drill..
  • [Material]: Concrete drill bit set industrial strength carbide drill bit tip, excellent abrasion resistance, make the drilling much more easier..
  • [Advantage]: Masonry drill bit set have 4 differenct concrete drill bit sizes that will help in drilling by starting with the smallest bit and continuing to the size needed..
  • [Easy To Drill, Fast And Clean]: Tungsten drill bits strong tungsten carbide drill bit tip and longer service life of masonry drill bit, the double U-type groove slot design b....
Check Stock

wesleydrill Mini Drill Bit Set 60 Pcs 3/64\-1/8\ Tiny Micro Twist Drill Bits Fit for Home DIY and General Building/Engineering

  • [Specifications and packaging]: 60pcs small drill bit set: Include size: 3/64 inchx10pcs drill bit ,3/32 inchx10pcs drill bit,1/16 inchx10pcs drill bit,5/64 inchx10pcs drill bit,7/64 inchx10pcs drill bit,1/8 inchx10pcs drill bit..
  • [Fitment]: Small titanium drill bit set ideal for DIY, home and general building/engineering using. Not for masonry and concrete drilling..
  • [Material]: Twist drill bit set industry grade high speed steel with titanium coating,high hardness,good wear resistance and durability..
  • [Advantage]: Tiny drill bits 135°precise point with sharpened edge promises cutting speed..
  • [Special coating]: HSS drill bit set titanium coating increases the ware-resistance and durability of the drill bit, effect long life drilling..
Check Stock

FTG USA Replacement Tapered Countersink Drill Bit Set 3 Pc (#10) 3/16' Countersink Bit Same Size Bit Replacement Only, Countersink Replacement Drill Bit FTG Maximum Torque Wood Bits Secured with Pin

  • Replacement tapered counter sinker drill bit set 3 Piece #10 (3/16") bit replacement Only (Without the 4 Flute cutter countersink counter-bore), made to replace the 3/16” bits of #10 countersink drill bit set for wood , with 1 Hex Wrench (1/8 inch Allen Key) included. Replacement bit countersink with hex shank compatible with 1/4" standard Quick Change chuck including impact drills.
  • Countersink replacement bits made for countersink drill bits for wood. with wider flute for increased chip flow. Replacement drill bits have logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Counter sinker drill bit replacement set, drill bits secured with pin, professional FTG drill countersink set Maximum Torque. Packaging set combination unique design protected by US Copyright Office.
  • Replacement countersink drill bits with pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. All FTG countersinks hex drill bit sets with tapered countersink bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink replacement drill bits designed as to work as wood drill bits. All same size replacement tapered drill bit for drill countersink.
Check Stock

Drill Bit Sharpener Portable Diamond Drill Bit Sharpening Tool Corundum Grinding Wheel for Iron-based Drill Bits Fit Width Range-Orange

  • Drill bit set sharpener Applicable Type: This diamond drill bit sharpener is mainly used for grinding iron drills, not suitable for other high hardness drills.This metal drill bit sharpener will be your good helper.This general drill bit sharpener drived by electric drill.Small and portable, practical tools portable drill bit sharpener.
  • Easily Increase the Life of Drill Bits:Power drill bit sharpeners.Forget the days of trying to find the correct angle by hand or accidentally tapering the edge of your drill mounted bit sharpener tools. Improve the utilization of drill bits, solve the troubles you have been buying drill bits, save time and save money..
  • Reliable & Efficient:Drill attachment drill bit sharpener.Compact and portable drill grinding tool, use this drill bit sharpening tool with your power drill to keep bits sharp and ready for use.This drill mounted bit sharpener is due to best for home use..
  • Convenient to carry: You can carry this portable drill bit tools sharpener in your truck toolbox, so that you don’t have to go to the hardware store to buy it. In a critical juncture, this tool will do your job well enough , Saving the days of manually searching for the correct angle or accidentally making the edge of the tool tapered..
Check Stock