Categories

Best Drill Bit Segment

Delta Diamond Boss Hog Tuckpointing Mortar Raking Diamond Glitter Bit 4-5/8-inch Length X 1/4" Shank for Mortar Removal

  • MORTAR REMOVAL - Ideal for intricate and delicate mortar removal where a diamond blade wouldn’t fit or be too difficult to use..
  • VACUUM BRAZED - Made with premium super-abrasive vacuum brazed diamond, this bit will grind faster, last longer and cost you less than any comparable tool..
  • SPECIFICATIONS - 4-5/8" long X 1/4" shank fits on most drills. Use on a regular drill. Do not use a impact drill. Allow the bit to do the work, do not apply too much pressure, and allow bit to cool down during use to prevent bending or breaking..
  • LIFETIME WARRANTY + FREE RETURN SHIPPING - All Delta Diamond Products, Inc. diamond blades, coring bits, hole saws and cup wheels feature a lifetime limited warranty against warping, cracking and/or material defects. If any diamond tool (being used for its intended purpose with at least 50% of the wear remaining) fails to perform properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the tool will be replaced at no charge..
Check Stock

Diamond Core Drill Bit Set - for Porcelain Tile Ceramic Marble Granite Drilling,BRSCHNITT 1/4' 5/16' 3/8' 4/5' 1' 1-3/8' 1-1/2' 2' 2-1/2' (6 8 10 20 25 35 38 50 65mm) Vacuum Brazed Diamond Hole Saw with 5/8-11 Thread

  • ✔Size Diamond drill bit--1/4" 5/16" 3/8" 4/5" 1" 1-3/8" 1-1/2" 2" 2-1/2" (6 8 10 20 25 35 38 50 65mm), diamond height 10mm, total length 60mm, 5/8-11 thread.
  • ✔Size Diamond blade:5 inch (125mm),diamond height 10mm ,segment thickness 1.2mm ,Arbor 7/8"(22.23mm) , wet or dry cutting.
  • ✔Wide Application of drill bit --Worked great for porcelain tile, ceramics, bathroom tile,marble granite,stone,masonry, brick with ease,Using water could prolong the lifetime.
  • ✔Wide Application of blade --A blade engineered for extremely smooth cutting of porcelain tile, ceramic tile, marble, granite,masonry and other natural stone.
Check Stock

Stadea CBD106N Diamond Concrete Hole Saw 5 Inch Core Drill Bit For Concrete Brick Block Stone Masonry, Laser Welded Wet Dry 1 1/4-7 Thread

  • 5 Inch Diamond Concrete Core Drill Bit Hole Saw, 17 Inch Tall Designed for drilling hard Concrete, Rebar, masonry, hard brick, Granite, and other hard materials.
  • Laser Welded Diamond Segments for extra joint strength needed to cut hard concrete and other hard materials effectively.
  • 17″ High tube length, with 1 1/4″-7 arbor, Fit known brand core drill rigs.
  • Designed to cut either in wet or dry use, for longer life span use wet.
  • 10 Pieces diamond Segments with high diamond concentration. each segment is 10 MM High, 4 MM thick and 24 MM wide.
Check Stock

Stadea CBD113N 3 Inch Concrete Hole Saw Core Diamond Drill Bit 3 Inch For Concrete Brick Block Stone Masonry Laser Welded Wet Dry 1 1/4-7 Thread

  • 3 Inch Diamond Concrete Core Drill Bit Hole Saw, 14 Inch high Designed for drilling hard Concrete, Rebar, masonry, hard brick, Granite, and other hard....
  • Laser Welded Diamond Segments for extra joint strength needed to cut hard concrete and other hard materials effectively.
  • 14" High tube length, with 1 1/4"-7 arbor, Fit known brand core drill rigs.
  • Designed to cut either in wet or dry use, for longer life span use wet.
  • 7 Pieces diamond Segments with high diamond concentration. each segment is 10 MM High, 3.5 MM thick and 24 MM wide.
Check Stock

REAWIREACHMI 6PCS Diamond Hole Saw Kit for Granite Marble Porcelain Tile Stone Brick Vacuum Brazed Core Bit 20mm/35mm/40mm/45mm/50mm /68mm

  • 1 3/8'' (35mm) Vacuum Brazed Diamond Drill Bit with 5/8-11 arbor..
  • Application -- Designed for drilling holes on soft granite, marble, porcelain, ceramic, travertine, masonry and other types of tile and stone..
  • Performance -- Made with the highest grade diamond, Vacuum brazed diamond technology provides fast, chip free holes while maintaining a long life. 5x the working life compared with electroplated bits..
  • Cooling -- Use Wet or Dry. Cutting wet will generally increase segment life..
  • Recommended Machine -- Use on a standard angle grinder with with 5/8-11 arbor. If used on a hand drill an adapter is needed. Max Rpm 4000..
Check Stock

This is Not A Drill Funny Carpenter Woodworking Mens T-Shirt

  • FTG 4TO12P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • Bits Secured with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood....
Check Stock

Diamond Tile Drill Bits Ceramic Diamond Glass Drill Bit Set 5 Pack 2 Carbide Drill Bits Ceramic Tile Drill Bits 3 Porcelain Granite Drill Bits and Drill Guide for Diamond Tip Drill Bit for Bottles

  • Tungsten Carbide Drill Bit For Ceramic Tile Bits For Drill Holes In Clay Plant Pots For Drainage 3/16″ And 1/4″ Ceramic Drill Bits For Tile . Tungsten Carbide Drill Bits have Self Centering Point for Drilling Holes in Ceramic Tile Marble Travertine and Slate..
  • Diamond Drill Bits For Glass 3/16 In 1/4″ In 1/2 Inch Drill Bit For Glass Drill Set. glass Drill Bit For Bottles Half Inch Glass Drill Bit With Guide For Drilling Hole In Glass Bottles And Glass Blocks For Tree Lights. Keep These Glass Hole Saw Drill Bit For Drilling Glass Cool With Water For Extended Life..
  • For Best Results Use The Diamond Drill Bit For Porcelain And The Spear Point Ceramic Tile Bit To Drill Tile. Use Diamond Bit To Drill Glass And Carbide Tipped Drill Bits With Any Battery or Electric Drill Hole Cutter Bits Must Be Used Wet. Carbide Ceramic Tile Drill Bit Set Can Be Used Dry If No Heat Builds Up..
  • Whilst The Tungsten Tile Cutting Drill Bits Can Be Used As Porcelain Tile Drill Bit The Diamond Tile Drill Bit Will Drill Holes In Porcelain Tile Faster And Last Longer As Long As Diamond Cutting Tip Is Kept Cool. Remove Diamond Tipped Drill Bit From Tile Hole Every 10 To 15 Seconds And Dip Diamond Porcelain Drill Bit Into Cup Of Water, Also Spray Water Into Ceramic Tile Hole To ....
Check Stock

FTG USA Wood Countersink Drill Bit Set 5 Pc Countersink Drill Bit #4#6#8#10#12 Countersink Bit for Woodworking, Tapered Drill Bits Secured with Pin to Hex Shank, 2 Stop Collar, 1 Allen Wrench

  • FTG 2337P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • FTG BITS SECURED with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable w....
Check Stock

FTG USA Countersink Drill Bit Set 5 Pc Countersink Drill Bit #4 6 8 10 12 Tapered Drill Bits Secured with Pin to 1/4 Hex Shank 1 Allen Wrench Counter Sinker Drill Bit Set for Woodworking

  • FTG 2337P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • FTG BITS SECURED with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable w....
Check Stock

wesleydrill Masonry Drill Bit Set 5 pcs 1/4"-1/2" Concrete Drill Bit Set Fit for Home DIY Building and Engineering Suitable for Electric Drill or Professional Drill

  • [Specifications and packaging]: 5 pcs Masonry Drill Bit Set.Include size: 2xMasonry Drill Bits 1/4" (6mm), 1xMasonry Drill Bit 5/16"(8mm), 1xMasonry Drill Bit 3/8"(10mm), 1xMasonry Drill Bit 1/2"(12mm), all in storage case..
  • [Fitment]: Carbide drill bits ideal for drilling faster holes in bathroom tiles, or wall mirrors, can easily drill holes on tile, concrete, brick, glass, ceramic, wood, and reduces breakout, please cooling with water and control the speed when drilling.Suitable for Home DIY, and Building/Engineering Use.Suitable for electric drill or professional drill..
  • [Material]: Concrete drill bit set industrial strength carbide drill bit tip, excellent abrasion resistance, make the drilling much more easier..
  • [Advantage]: Masonry drill bit set have 4 differenct concrete drill bit sizes that will help in drilling by starting with the smallest bit and continuing to the size needed..
  • [Easy To Drill, Fast And Clean]: Tungsten drill bits strong tungsten carbide drill bit tip and longer service life of masonry drill bit, the double U-type groove slot design b....
Check Stock

wesleydrill Mini Drill Bit Set 60 Pcs 3/64\-1/8\ Tiny Micro Twist Drill Bits Fit for Home DIY and General Building/Engineering

  • [Specifications and packaging]: 60pcs small drill bit set: Include size: 3/64 inchx10pcs drill bit ,3/32 inchx10pcs drill bit,1/16 inchx10pcs drill bit,5/64 inchx10pcs drill bit,7/64 inchx10pcs drill bit,1/8 inchx10pcs drill bit..
  • [Fitment]: Small titanium drill bit set ideal for DIY, home and general building/engineering using. Not for masonry and concrete drilling..
  • [Material]: Twist drill bit set industry grade high speed steel with titanium coating,high hardness,good wear resistance and durability..
  • [Advantage]: Tiny drill bits 135°precise point with sharpened edge promises cutting speed..
  • [Special coating]: HSS drill bit set titanium coating increases the ware-resistance and durability of the drill bit, effect long life drilling..
Check Stock

FTG USA Replacement Tapered Countersink Drill Bit Set 3 Pc (#10) 3/16' Countersink Bit Same Size Bit Replacement Only, Countersink Replacement Drill Bit FTG Maximum Torque Wood Bits Secured with Pin

  • Replacement tapered counter sinker drill bit set 3 Piece #10 (3/16") bit replacement Only (Without the 4 Flute cutter countersink counter-bore), made to replace the 3/16” bits of #10 countersink drill bit set for wood , with 1 Hex Wrench (1/8 inch Allen Key) included. Replacement bit countersink with hex shank compatible with 1/4" standard Quick Change chuck including impact drills.
  • Countersink replacement bits made for countersink drill bits for wood. with wider flute for increased chip flow. Replacement drill bits have logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Counter sinker drill bit replacement set, drill bits secured with pin, professional FTG drill countersink set Maximum Torque. Packaging set combination unique design protected by US Copyright Office.
  • Replacement countersink drill bits with pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. All FTG countersinks hex drill bit sets with tapered countersink bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink replacement drill bits designed as to work as wood drill bits. All same size replacement tapered drill bit for drill countersink.
Check Stock

Drill Bit Sharpener Portable Diamond Drill Bit Sharpening Tool Corundum Grinding Wheel for Iron-based Drill Bits Fit Width Range-Orange

  • Drill bit set sharpener Applicable Type: This diamond drill bit sharpener is mainly used for grinding iron drills, not suitable for other high hardness drills.This metal drill bit sharpener will be your good helper.This general drill bit sharpener drived by electric drill.Small and portable, practical tools portable drill bit sharpener.
  • Easily Increase the Life of Drill Bits:Power drill bit sharpeners.Forget the days of trying to find the correct angle by hand or accidentally tapering the edge of your drill mounted bit sharpener tools. Improve the utilization of drill bits, solve the troubles you have been buying drill bits, save time and save money..
  • Reliable & Efficient:Drill attachment drill bit sharpener.Compact and portable drill grinding tool, use this drill bit sharpening tool with your power drill to keep bits sharp and ready for use.This drill mounted bit sharpener is due to best for home use..
  • Convenient to carry: You can carry this portable drill bit tools sharpener in your truck toolbox, so that you don’t have to go to the hardware store to buy it. In a critical juncture, this tool will do your job well enough , Saving the days of manually searching for the correct angle or accidentally making the edge of the tool tapered..
Check Stock