Categories

Best Drill For Porcelain

4-1/2” Diamond Drill Bits Glass Hole Saw Drill Bit Set for Glass Ceramics Porcelain Ceramic Tile Marble

  • SMALL DRILL BIT: Hole diameter: 115mm(4-1/2"),total length: 56mm(2.2").Package includes 1 pcs 115mm diamond hole saw drill with a transparent box..
  • HIGH QUALITY: Diamond ceramic hole saw are made of industrial grade carbon steel and have a nickel-plated coating to resist corrosion..
  • LARGE CLEARANCE HOLE: These glass hole saw set along the drill bit facilitate the entrance of cooling water and escape of chips and other particles from drilling. Makes the drilling process easier..
  • APPLICATION: Suitable for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, marble, light stone and fiberglass..
  • WARM TIPS: Start drill at 45 Degree to surface and align to 91 Degree as hole forms.Water is required to cool down the drill when using them which will greatly extend the life of the bit..
Check Stock

30Pcs Diamond Drill Bits Glass Hole Saw Drill Bit Set Cutting Remover Tools for Glass Porcelain Tile Ceramic Marble Granite Bottles DIY(6mm-50mm)

  • [Scope of application]:Diamond Hole Saw bits are versatile drill bits that allow you to cleanly cut glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, granite, light stone and fiberglass. It is important to note that you must keep your drill bit wet as the friction of the bits and materials build up heat quickly.
  • [Diameter Range]: 16 different drill bits included with this glass drill bit set to meet various demands. Includes the following diameters: 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 25mm, 28mm, 30mm, 35mm, 40mm, 45mm,50mm, 16pcs hole saw drills + 14pcs 6mm Hole opener.
  • [Supreme Quality]: These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. A thicken diamond coating on the tops offers superior cutting strength for maximum drilling outcomes.
  • [Applicable Method]:1,Install the drill bit on a drill such as a hand drill.2,Since the hole opener does not have a central positioning bit, the hole is tilted at 45 degrees during operation, the speed of the drill is slowed down, and the glass and the stone are slowly contacted.3,When a glass or stone appears in a crescent (the crescent is positioned), then the vertical drill begins to work..
Check Stock

Masonry Drill Bit Set, 5Pcs Concrete Drill Bits Set for Tile, Brick, Glass, Plastic and Wood, Tungsten Carbide Tip Drill Bits for Wall Mirror and Ceramic Tile in Size 3/16, 1/4, 5/16, 3/8, 1/2inch

  • 【UNIQUE DESIGN MASONRY DRILL BIT】Our concrete drill bits is designed by unique cross angle and U-shaped drain groove, fast smoother drilling, which is great for drilling holes on the glass, ceramic, tile, mirror, plant pots, wood, porcelain, brick wall, marble, thin iron plate etc. Also it is easy to remove chips when working..
  • 【QUALITIED MATERIALS of CONCRETE BITS】The concrete drill bit is made of premium carbide YG6X alloy, higher hardness, more wear-resistant than ordinary tile drill bits, and a reinforced head prevents drill bits cracking and provides a longer life. Also 1/4” Hex Shank fits into all power tools more easily and securely..
  • 【WIDELY USEAGE of TILE DRILL BITS】 The masonry drill bits can drill different holes on the GLASS, CERAMIC, TILE, MIRROR, PLANT POTS, WOOD, PORCELAIN, BRICK WALL etc, Please try to keep the drill vertical and remember to add Water or coolant when drilling..
  • 【ALL YOUR NEED IN ONE SET】The glass drill bit comes with a storage box, which includes 5pcs tile drill bit in size 3/16, 1/4 , 5/16, 3/8 , 1/2inch, you can drill various holes by this portable tools, which can meet your the daily needs of your home DIY work..
  • 【100% QUALITIED AFTER-SERVICE】We are confident with the quality of concrete bits, If ....
Check Stock

Dry Diamond Drill Bits Set 1/4” Hex Shank Vacuum Brazed 6mm Hole Saws for Porcelain Granite Tile Ceramic Marble for Steady Grips in Most Popular Drills, 2 Packs in Individual Storage Cases

  • 1/4” Dry Diamond Drill Bits - Set of 2 Packs 6mm Vacuum Brazed Diamond Hole Saws for drilling holes in hard materials such as Granite, Porcelain, Tile, Ceramic, Marble, Stone, Glass, Brick.
  • Fit Universally – These Dry Diamond Core Drill Bits Built with 1/4” Hex Shank compatible with most hand-held drill, drill press and any other tools with chucks that accepts 1/4” Hex Shank bits.
  • Make Tough Jobs Easier – Diamond coated drill bit drilling through things like porcelain tile smoothly and easily without cracking or chipping the delicate materials.
  • starting the bit on an angle will prevent drill bit from “walking”.
  • For Professional & Hobby – Decent Diamond hole saws ideal for drilling holes through hard tile to install shower doors, drilling holes in ceramic plant pots vases glass bottles for hobby projects.
  • Convenient Dry Drilling – Wax Filled Diamond Core Bit with wax inside to cool the bit while dry drilling perfect for jobs where water is not applicable.
Check Stock

Diamond Drill Bit Set,10 Pieces Diamond Hole Saw, Glass Hole Saw for Tiles Glass, Ceramic, Porcelain, Marble, Bottles, DIY,6mm - 30mm

  • ... Nickel plated with diamond powder coating provides superior performance and cutting strength for extended life. High quality and performance, this diamond bit is perfect for making clean and accurate holes, making it your best choice..
  • Versatile: This diamond coated bit can remove a full circle from glass, ceramic, porcelain, porcelain tile, limestone, slate, marble, granite, light stone and fiberglass or other materials..
  • Applicable drill models: Can be used with three-claw/round shank ordinary bench drill, hand electric drill or rechargeable drill(not included), as long as the tool chuck can be adjusted to 6-10MM are available. Note: Not suitable for electric hammer, electric pick electric grinding pen.Water is required for lubrication when drilling, otherwise the diamond coring drill will burn. WARNING: Not for use with concrete or depths greater than approximately 1/2"..
  • 10 sizes:No markings for size on the item.There are 10 different sizes (6 mm, 8 mm, 10 mm, 12 mm, 14 mm, 16 mm, 18 mm, 20 mm, 22 mm, 30 mm), different sizes to meet your different needs and help you in different places..
Check Stock

uxcell 60mm Diamond Drill Bits Hole Saws for Glass Ceramic Porcelain Tiles 2 Pcs

  • Diamond coating maximizes performance and retains a sharper cutting edge..
  • Nickel plating surface can extend the service life and enhance the corrosion resistance..
  • Suitable for cutting accurate holes on glass, ceramics, porcelain, ceramic tile, porcelain tile etc.. Not suitable for drilling tempered glass, plastic and wood..
  • Please use at low drill speeds and drill pressure. Always work with coolant (water) when drilling. Not suited for use on concrete or for depths beyond about 1/2 inch.
  • Package Content: 2pcs x Glass Hole Saw. Provide different sizes to satisfy your demands..
Check Stock

uxcell 22mm Diamond Drill Bits Hole Saws for Glass Ceramic Porcelain Tiles Pack of 5

  • Diamond coating maximizes performance and retains a sharper cutting edge..
  • Nickel plating surface can extend the service life and enhance the corrosion resistance..
  • Suitable for cutting accurate holes on glass, ceramics, porcelain, ceramic tile, porcelain tile etc.. Not suitable for drilling tempered glass, plastic and wood..
  • Please use at low drill speeds and drill pressure. Always work with coolant (water) when drilling. Not suited for use on concrete or for depths beyond about 1/2 inch.
  • Package Content: 5pcs x Glass Hole Saw. Provide different sizes to satisfy your demands..
Check Stock

uxcell 10mm Diamond Drill Bits Hole Saws for Glass Ceramic Porcelain Tiles Pack of 10

  • Diamond coating maximizes performance and retains a sharper cutting edge..
  • Nickel plating surface can extend the service life and enhance the corrosion resistance..
  • Suitable for cutting accurate holes on glass, ceramics, porcelain, ceramic tile, porcelain tile etc.. Not suitable for drilling tempered glass, plastic and wood..
  • Please use at low drill speeds and drill pressure. Always work with coolant (water) when drilling. Not suited for use on concrete or for depths beyond about 1/2 inch.
  • Package Content: 10pcs x Glass Hole Saw. Provide different sizes to satisfy your demands..
Check Stock

3/4 Inch Diamond Drill Bit Ceramic Pot Porcelain Tile Glass Bottle Granite Hole Saw 0.75 inches by Drilax

  • DRILL HOLES in glass bottles, porcelain ceramic tiles, plant pots, fish tanks, granite, marble with diamond coated drill bit hole saw..
  • GREAT for making wine bottles with light strings. Can also drill through glass blocks. You can drill through bath tub tile, and put on a handle bars. Aquarium drill bit for overflow installation..
  • WORKS with STANDARD electric, cordless or upright drill presses. Shank size is 3/8 inch..
  • EASY TO USE Diamond Drill Bits. Start at an angle, go vertical, do not apply too much pressure. Keep the tool wet for cooling..
  • DIAMOND TIPPED DRILL BIT for drain holes, bottles, quartz, shower, faucet, kitchen and bathroom upgrades..
Check Stock

uxcell 2pcs 35mm Diamond Drill Bit Hole Saw for Watt Glass Marble Fiberglass Ceramic Tool

  • Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws..
  • Nickel plating on these bits maximizes your tools life with great resistance to corrosion..
  • Side holes allow for easy slug removal after drilling..
  • Suitable for cutting accurate holes on glass, ceramics, porcelain, ceramic tile, porcelain tile etc.. Not suitable for drilling tempered glass, plastic and wood..
  • Please use at low drill speeds and drill pressure. Always work with coolant (water) when drilling. Not suited for use on concrete or for depths beyond about 1/2 inch..
Check Stock

Drilax 4-1/8 inch Diamond Hole Saw Plaster Quartz Glass Ceramic Porcelain Tile Marble Granite Drilling Tool Drill Bit Toilet Shower Valve Cutout Recessed Light Installation Ceiling Hole 4 1/8 in

  • DUSTLESS and FAST Large Size Drilling for Floor, Wall Tiles, Toilet Cutout, Shower Diverter Valves. 4-1/8 inch Diamond Hole Saw Drill Bit.
  • DUSTLESS - FAST - CLEAN PROFESSIONAL Holes in Tiles, Glass, Fish Tanks, Marble, Granite Countertop, Ceramic, Porcelain.
  • Use water as coolant to prolong the tool life. DESIRED RESULTS in Granite, Ceramic & Porcelain Tiles, Glass, Marble, Slate, and many types of Stones. No need for a pilot drill..
  • Depth of Cut: 1-1/8 inch - STANDARD 3/8 inch Shank Use Standard Electric or Cordless Rotary Tools or Drill.
  • Plaster Ceiling Holes for Recessed Light Installation.
Check Stock

1 3/4 Inch Diamond Drill Bit Tile Hole Saw Ceramic Porcelain Quartz Granite Countertop Glass Bottle Single Pack Tile Drill Bit 1-3/4 inch

  • 1-3/4 inch Diamond Hole Saw Drill Bit -Drills Through Quartz, Granite, Porcelain, Ceramics, Tiles, Glass.
  • Standard 3/8" Shank for Standard Drills - No Special Tools Needed.
  • Solid Steel Body: Spins True, Cools Better, Lasts Longer.
  • Drills Through Toughest Materials Wet Use with Water for Cooling.
  • Diamond Drill Bit Tile Hole Saw Ceramic Porcelain Quartz Granite Glass Fish Tank Kitchen Bathroom Shower Faucet Installation.
Check Stock

Drilax Diamond Drill Bit Hole Saw Set Drilling 3/8 1/2 5/8 3/4 1 Granite Ceramic Porcelain Tiles Pot Glass Bottle Lamp Quartz Slate Set 5 Pieces

  • DRILL HOLES in glass bottles, porcelain ceramic tiles, plant pots, fish tanks, granite, marble with diamond coated drill bit hole saw..
  • GREAT for making wine bottles with light strings. Can also drill through glass blocks. You can drill through bath tub tile, and put on a handle bars. Aquarium drill bit for overflow installation..
  • WORKS with STANDARD electric, cordless or upright drill presses. Shank size is 3/8 inch. EASY TO USE Diamond Drill Bits. Start at an angle, go vertical, do not apply too much pressure. Keep the tool wet for cooling..
Check Stock