Categories

Best Drill Press Vise 2

Peachtree Woodworking Supply Pen Blank Centering Vise for Drilling Center Holes in Pen Blanks Using a Drill Press

  • Easily locate and drill pen blank centers and Drill through the exact center of your pen blanks with this simple but effective Pen Centering vise. By far one of the best selling pen vises available, this jig will be a go to tool when turning your pens..
  • The jaws on the drilling center move in and out simultaneously to insure precision center drilling of your blanks each and every time you use the vise..
  • Just set up the vise once and drill all of your blanks in the exact center. There is no need to change the setup regardless of the blanks size or shape..
  • Holds blanks up to 1-1/2" square. The pen center vise includes a scrap board piece of mdf. It measures approximately 2" by 1/4"..
  • The scrap piece can be flipped, slid and reversed to get numerous uses out of a single piece. When you use up all of the surface, simply cut another piece out of 1/4" thick stock. Wooden base is removable and replaceable. If you need a larger base to clamp the vise to your drill press, simply remove the wooden base and replace it with a base made to your exact specifications.
Check Stock

Pin Vise for Resin Molds Jewelry Casting, LEOBRO Steel Hand Drill with 10 PCS Drill Bit, Drill Press Vise, 210 PCS Keychain Supplies, Precision Hand Drill Kit for DIY Resin Keychains Jewelry Making

  • Perfect Kit for DIY Projects: Includes 1 steel pin vise, 10 pcs steel drill bits(0.8-3mm), 1 drill press vise, 210 pcs keychain supplies(contain key rings with chains, screw eye pins, jump rings), great for creating epoxy resin jewelry, keychain, necklace, earrings, Christmas decors, and wood working, sculpturing, etc...
  • Well-made Steel Hand Drill: 12cm/4.7inch stainless steel hand drill, sturdy and long-lasting. Precisely designed 3-jaw chuck, clamp the drill bit uprightly and firmly. With rough texture on turning parts, prevent fingers from sliding and make rotation easier. Shiny silver look, classic and graceful..
  • 10 Drill Bits for Selection: Contains 0.8, 1, 1.2, 1.5, 1.8, 2, 2.2, 2.5, 2.8, 3 mm drill bits, meet your different needs. Made of stainless steel, hard to bend or crack, durable. All bits packed nicely in a plastic case with compartments and according marks, well prevent loss, good for finding..
  • Drill Press Vise for Fixing: Help hold parts in place while you drill/glue/sculpture, great for DIY precision work. Clamping range: 0-2 inch (0-5.3 cm), can be adjusted easily, fit for holding small art pieces. Made of quality plastic, sturdy, clamp securely, long-lasting..
  • 210 PCS Keychain Supplies: 100 pcs screw eye pins (gold&silver, 50 for each)....
Check Stock

Z-COLOR Mini Flat Clamp Table Jaw Bench Clamp Mini Drill Press Vice Opening Parallel Table Vise DIY Sculpture Craft Carving Tool

  • ... hold your workpiece firmly in place and protect it from your metal bench vise. Safely hold any round, flat or irregular metal, plastic or wood objects. Simply change between the grooved and flat vice jaw sets accordingly.
  • Compatibility: Our vise jaws are compatible with a wide variety of tools including vise block, drill press vise, woodworking vise, brass hammer, clamps, bench vise and mill clamps. Add it to your collection of drill press accessories..
  • Protects Delicate Surfaces: Our soft jaws for bench vise are made from Thermoplastic polyurethane (TPU) rubber which is sturdy enough to hold your workpiece in place but won’t discolor or leave any marks on their delicate surface. These vise jaws are ideal for woodworking, gunsmithing, jewelry making, and more delicate type work..
  • Grooved or Flat Surface: Our 4 inch vise soft jaws feature a grooved surface specifically designed to keep round or irregularly shaped items securely in place and a flat surface specifically designed to protect and hold delicate flat or square objects..
  • 4 Strong Magnets for East Attachment: Each vise pad set has 4 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise..
Check Stock

Daily Treasures 34Pcs Pin Vise Hand Drill Set, Include Pin Vise Hand Drill with Bench Vise, 0.5-3mm PCB Mini Twist Drill Bits,5 Finger Covers in 3 Sizes and 2 Diamond Needle File for Craft Carving DIY

  • 【Economic Affordable Hand Drill Set】-This hand drills set comes with 1 adjustable pin vise, 25 pcs twist drill bits in 9 different sizes(0.5mm,0.6mm,1mm,1.2mm,1.5mm,1.8mm,2mm,2.35mm,and 3mm),1pcs jewelry vice, 1 pcs flat file,1 pcs round file and 5 pcs silicone finger covers. Meet your hand carving and DIY needs.
  • 【High Quality and Durable】-This manual pin vice has 3 jaw hardened steel keyless chucks to grip the small drill bits tightly. After many uses the drill bit does not skid and not falling off. And can adjust twist drills with a diameter of 0.2 - 3.4mm.The high-speed steel hobby drill can easily handle your precision drilling..
  • 【 Bench Vise Help a Lot 】-There is a mini drill press vise, which deisgns with 4 plastic clips to clamp square, round, irregular objects of 0-30mm size. The jewelry vise can help you to fix the object you want to drill, and so that you can drill rightly.
  • 【 Extra DIY Drill Auxiliary Tool】-Specialized diamond electroplating process with soft PVC-dipped handle makes these 2pcs files with high hardness, which can help you to polish and shape the wood, plastic, glass, resin, acrylic and other materials. And with 5pcs silicone finger covers in 3 sizes to protect your hands when opreating.
Check Stock

3 Inch Cross Slide Drill Press Vise, Aluminum Alloy Milling Vice Holder Woodworking Clamping Vise Machine Bench Top Mount Cross Sliding Vise with Rotating Handle for Wood Working

  • 【Provide Strong Clamping Force】: Widened jaws of the cross slide drill press vise for stronger clamping force to keep workpiece more stable during machining, maximum jaw is 2.73in.
  • 【High Accuracy】: The handwheel has 0.1 mm increments marked by the machine for maximum accuracy. X direction adjustment is 80 mm. Y direction adjustment is 67mm.
  • Ergonomic handle of the milling vice clamping machine for easy slide on and off.
  • 【Heavy Duty Construction】: Drill press vice is constructed of high quality aluminum alloy, ensures high hardness and durability.
  • The gripper is equipped with a removable silicone pad, which can better protect the workpiece during operation.
  • 【Easy to Use】: With high-strength accuracy screw, the bench milling vice holder is not easy to slip or deform, provide great stability and easy to use, high working efficiency.
  • 【Versatile Milling Vice Holder】: 3 inch cross slide drill press vise is designed for woodworking and metalworking, widely used in milling machine, drill press and machinery maintenance, etc., great for home use or light professional use.
Check Stock

Pin Vise for Resin Casting Molds, Pin Vise Hand Drill Set with 20PCS Drill Bits (0.8-3mm), Precision Hand Drill Tools for Resin, Jewelry Keychain, Pendant

  • ★What You Get: 1PCS hand pin vise for resin molds with 20pcs twist drill bits in different sizes(0.8mm,1.0mm,1.2mm,1.5mm,1.8mm,2.0mm,2.2mm,2.5mm,2.8mm,3.0mm).
  • ★Functions of Pin Vise: The pin vise for resin casting molds is used for drilling small holes in wood, plastic, resin, walnut, beads, olive nut, small model kit etc. Then you can make keychain, bracelet, necklace, pendant easily(Notice: not fit for some material like iron, steel or stone).
  • ★High Quality Hand Drill: The precision pin vise is made of high quality stainless steel, which is sturdy and durable, can serve you for a long time. Exquisite 3 jaw chuck design make it easy to hold slim drill bits firmly.
  • ★Easy to Use: The mini hand drill has moderate size, so you can hold it easily. And the operation is very simple. Just half unscrew the vise head, insert the drill bit, then screw the head tightly, target the place, fix the top of handle while turning the handle.
  • ★ Warm Tips: The drill bits will shake in the box in transit , maybe result in some tiny drill bits hide behind the longer drill bits. So please open the box and pour out all the drill bits upon received the parcel. Check the number of drill bits..
Check Stock

COMOWARE 55 Pcs Pin Vise Hand Drill with Micro Drill Bit Set, Precision Jewelry Drill, Hand Drill for Jewelry Making, HSS Micro Drill Bits (0.3-3.0mm), Craft Drill for Resin Polymer Clay Craft DIY

  • 【DURABLE HAND PIN VISE】- The hand drill features aluminium body that is strong and durable. The 3-jaw hardened steel chuck delivers firm clamp on micro drill bits. And the anti-slip handle design helps the jewelry drill provide stable control on small, fragile and important projects..
  • 【PRECISION DESIGN】- The precisely designed chuck of this pin vise hand drill allows you to easily rotate the vise head with an adjustable clamp range of 0.3 - 3.4mm. These micro drill bits are made from HSS 4241 and roll forged for proven strength and durability. With sharp cutting edge and 118 degree point tip, these twist drill bits delivers clean drilling performance on precision work..
  • 【FULL SIZE SET】- The 55pcs pin vise hand drill with micro drill bit set includes 1 piece hand drill, 1 pair of tweezers, 1 portable storage case and 52 pieces of micro drill bits in 30 different sizes to satisfy all you demand. (1pc x 0.3mm, 0.35mm, 0.4mm, 0.45mm, 2.1mm, 2.2mm, 2.3mm, 2.4mm, 2.5mm, 2.6mm, 2.7mm, 2.8mm, 2.9mm, 3.0mm.
  • 2pcs x 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5mm, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm.
  • 3pcs x 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm.).
  • 【WIDE APPLICATION】- These mini drill bits are light in weight and compact in size. The multi-purpose craft drill is....
Check Stock

ZGRM Vise Precision Bench Clamp 4-Inch Drill Press Vise Table Vise (Large)

  • Data: The jaw of vise can be opened up to 4 inches,Net weight 5.3 lbs..
  • Wide range of use: 4 inch cast iron drill vise can precision process various shapes of wood, metal, plastic and other precision parts. In order to protect the soft metal, wood or other fragile items, and firmly fix it in place, we have specially provided additional RUBBER PAD..
  • Stability: Fix the workpiece firmly in place to achieve safe and accurate drilling. The heavy-duty cast iron base and four on-board mounting slots provide stability to the vise during operation..
  • Broad compatibility: 4-inch drill presses are compatible with most drill press benches on the market..
  • Material: The clamp table is forged with a spray-forged hardening process to ensure ultimate durability and long service life..
Check Stock

6-Inch Cross-Slide Drill Press Vise X-Y Compound Vise 2 Way Heavy Duty Cross Slide Vise Clamp Machine Metal Milling

  • Material - This X-Y compound vise made of heavy duty cast iron construction, Powerful serrated steel jaws.
  • Size - 6" wide machinist jaws ,Maximum jaws opening: 5.9" , Jaw depth 2.08 inch.
  • Vice Travel X: 5.5inch Vice Travel Y: 7.48inch.cold rolled steel....
  • Usage - uyoyous cross slide vise have swivel crank handles for adjusting vise front to back and left to right, bolt down slots for securing..
  • Function - Hinged vise crank handles drops out of the way, designed for woodworking and metalworking..
  • Wide Application - our heavy duty cross slide vise designed for woodworking and metalworking, widely used in milling machine, drill press and....
Check Stock

Hakkin 32 Pcs Pin Vise Hand Drill for Jewelry Making, Mini Manual Drill Kit - 0.8-3.0mm HSS Micro Twist Drill, Pin Vise, Carving Clamp and PCB Drills, Rotary Hand Press Drill for Resin, Wood, Plastic

  • 【Value Package】The pin vises hand drill bits set include 20 pcs 0.8-3.0mm twist drill bits, a pin vise hand drill for resin, a mini carving clamp and 10 pcs 0.3-1.2mm PCB Drills. Our precise hand drill set make small holes easily in Resin, Pearls, Wood, Plastic, Polymer Clay, Bead, to make necklace, pendant, earring, bracelet, keychain, model, sculpture, etc..
  • 【Ergonomic Design and Humanized Design】The hand pin vise is made of aluminum alloy. Easily adjustable 3 jaw chuck to clamp the drill and keep the drill upright. The adjustable range of the clamp is 0.3-3.4mm. The tail of the compact manual model hand drill can be unscrewed and the drill bit can be neatly stored inside, don’t worry about losing it. Pen size design, easy to carry and store..
  • 【Mini Bench Clamp Instead of Hand Held】Hakkin jewelry drill bit set has an indispensable tool, that is mini bench clamp, its body is made of aluminum alloy, compact and handy, hold the item in position and prevent fingers from being hurt. The small drill press clamp supports 0 - 2.2 inch (0-57 mm), supports round, square and irregular objects, ideal for holding small parts, Watch repairing, Sculpture, Craft, Jewelry and DIY Carving..
  • 【Many Sizes Bits】The jewelry drill is Includes 30 pieces of p....
Check Stock

Hand Drill Bits Set 60 Pieces, Precision Hand Pin Vise Rotary Tools with Micro Mini Twist Drill Bits for Wood, Jewelry, Plastic, Craft Projects and Model Building, DIY Drilling

  • PACKAGE INCLUDE: 48 pieces twist drill bits, 10 pieces PCB mini drill bits(in random color), 1 piece mini-pin vise, and 1 piece bench vise. The complete size pin vice drill kit can meet your different needs..
  • 48 PIECES TWIST DRILL BITS: The micro drill bit set includes 48pcs twist drill bits. 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 3.0mm, 1 piece each size.
  • 0.5, 0.6, 0.7, 0.8, 0.9, 1.0mm, 3 pieces each size.
  • 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8, 1.9, 2.0mm, 2 pieces each size..
  • 3 JAW CHUCK DESIGN: Thanks to the 3-jaws designed chuck, you can easily rotate the vise head to clamp the drill bit in a range of 0.2 - 3.4mm. The compact bench vise is approx 4.3 x 2.4 x 1.4 inches, it can be easily put in your bag when you don’t need it..
  • DURABLE & COMFORTABLE: The hand drill for jewelry making is comfortable to use because of its ergonomically and anti-slip design. The small hand drill bit set was made of durable aluminum alloy material. NOTE: The twist drills are very sensitive for very small diameters. Please choose the correct size drill bits and make sure that you do not push hard. And make sure repeatedly move the drill out of the workpiece (chip removal)..
  • APPLICATION: The mini hand drill bit set is great for wood, also for resin, resin, jewelry,....
Check Stock

4" Cross Slide Drill Press Vise, Heavy Duty Cast Iron Milling Vice Holder Woodworking Clamping Vise Machine Bench Top Mount

  • 【Provide Strong Clamping Force】: Widened jaws of the cross slide drill press vise for stronger clamping force to keep workpiece more stable during machining.
  • 【Heavy Duty Construction】: Constructed of heavy duty cast iron, ensures high hardness and durability, hardened steel jaws on the cross slide milling vice holder add for extra durability and longevity.
  • 【Double Direction Design】: Features with double direction design, can move in horizontal and longitudinal for precise positioning, removable handle of the milling vice clamping machine for easy slide on and off.
  • 【Easy to Use】: There are several mounting holes on the bottom of drill press vice for convenient fastening firmly in position, provide great stability and easy to use.
  • 【Versatile Milling Vice Holder】: Hinged vise crank handles drops out of the way, designed for woodworking and metalworking, widely used in milling machine, drill press and machinery maintenance, etc.
Check Stock

ATLIN Vise Jaws 6' - Nylon, Non Marring Soft Jaws - Multi-Purpose Design for Woodworking, Jewelry Making, Plumbing

  • Non-marring – The vise jaws are made from a tough, but soft nylon. ATLIN 6in vise jaw pads will never mar or damage any of your project materials.
  • Easy Install – The soft jaws attach to your vise with 3 neodymium magnets.
  • Grooved Design – The 6 inch vise inserts feature a multi-purpose design which is ideal for, woodworking, jewelry making, threaded items, pipe, tubing, AN fittings.
  • Universal Compatibility – ATLIN vice jaws are compatible with any 6" milling vise, machine vise, drill press vise, bench vise.
  • Sizing & Specs – vise jaws measure 6" in length, Groove sizes: 3/8" @ 60° angle | vertical grooves: 1/4", 1/8", 1/16" 5/8" | horizontal groove: 1/4" – See second photo for further details.
Check Stock