Categories

Best Drilling Cutter

SNUG Fasteners Five (5) 5/32\ x 5-1/2\ Carbide Tip Masonry Drill Bits for Concrete, Brick, or Block (SNG534)

  • ❶HIGH-QUALITY HARD ALLOY: The cutter head is made of cemented carbide. Hardness up to 45HRC, Triangular cutter head resistance is smaller. And it can improve work efficiency, higher hardness than ordinary drill bit, more wear-resistant..
  • ❷EXQUISITE CRAFTSMANSHIP: The surface of the drill bit is treated by fine polishing, and the new electroplating process can prevent the drill bit from rusting and prolong the life of the drill bit..
  • ❸10 PCS DRILL BIT SET WITH 6 DIFFERENT SIZES: 5/32” (4mm), 3/16” (5mm),1/4” (6mm), 5/16” (8mm) ,3/8” (10mm), 1/2” (12mm) fit your different needs..
  • ❹NEW DESIGN: U-shaped drain groove, spiral handle design, easy to remove chips during work, smoother drilling..
  • ❺WIDELY USAGE: It can be used for drilling walls, bricks, ceramic, wood, glass, tiles, stainless steel, concrete, etc. Remember to add Water or coolant when drilling..
Check Stock

Carbide Hole Saw, 1 Inch Cutting Diameter TCT Hole Saw, Tungsten Carbide Tipped Hole Cutter with Pilot Drill Bit for Cutting Stainless Steel, Metal Sheet and Aluminum Alloy

  • 【QUALITY MATERIAL】The cutting edge of the Tungsten Carbide Tipped Cutters(TCT hole saws) adopts industrial grade YG10X carbide,which can cut 5 mm stainless steel, 20mm cast iron, 3mm aluminum alloy, and 4mm hot rolled section steel..
  • 【FAST CUTTING】Our carbide hole saw has 3 distinct cutting edge to balance the cutting and make the blades more durable, sharp and efficient for cutting hard metal. Carbide technology and optimized tooth geometry make hole cutter cut fast in most applications..
  • 【UNIVERSAL FIT】This TCT hole cutter is suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine. It can be used in many occasions and meets the needs of most people..
  • 【WARM TIPS】When processing stainless steel, please keep the drilling rig running evenly at a low speed or punch the center hole in advance for extending hole cutter life. Please add coolant or water when working on stainless steel and steel metal sheets..
  • 【BUY WITH Confidence】Ihomepark is committed to providing customers with high-quality products and thoughtful service. You can contact us at any time if you have any questions, and we wanna our customers to be 100% satisfied..
Check Stock

SaferCCTV 4Pcs Countersink Drill Bit Set 8pcs Wood Plug Cutter Drill Bit Set for Tapered 5/8 1/2 3/8 1/4 Woodworking Cork Drill Bit Knife

  • Wood plug cutter cutting set dowel maker cutting tools. High quality metal, use pay attention to rest, avoid burning knife, Oil can prolong life.....
  • Countersink Drill Bit Set: 4 Sizes in one drill bit set( 6#,8#,10#,12#), which meet your different needs perfectly.
  • Wood plug cutter drill bit apply to with a clamp or joint drilling machine, suitable for drilling in the hard wood and wood floor, machine screw for....
  • 8pcs Wood Plug Cutter Cutting Tool Drill Bit Set Uses: for bench drill and hand drill, recommended bench drill, easy to center.
  • Unique service can make you rest assured to buy--(1)Warranty 14 months, a warranty system, to provide repair parts. (2) Professional sellers, and....
Check Stock

Dremel 9910 Tungsten Carbide Cutter

  • The product is 1/8 Inch Diameter, Tungsten Carbide Cutter.
  • Do not use for drilling or enlarging holes less than twice the diameter of the cutter to avoid carbide surface catching side of hole and breaking.
  • Secure objects to a stable surface while working.
  • Use the sides of the cutter (rather than the tip) for effective cutting the tip cuts poorly and can break under pressure.
  • Use higher speeds for hard woods slower speeds for metals and very slow speeds for plastics.
Check Stock

【2022 New Type】Mgtgbao Concrete Drill Bit Set, 10pcs 6MM Masonry Drill Bits Set Carbide Tip for Glass, Brick, Tile, Concrete, Plastic and Wood

  • ❶NEW DESIGN: U-shaped drain groove, spiral handle design, easy to remove chips during work, smoother drilling..
  • ❷EXQUISITE CRAFTSMANSHIP: The surface of the drill bit is treated by fine polishing, and the new electroplating process can prevent the drill bit from rusting and prolong the life of the drill bit..
  • ❸HIGH-QUALITY HARD ALLOY: The cutter head is made of cemented carbide. Hardness up to 45HRC, Cross cutter head resistance is smaller. And it can improve work efficiency, higher hardness than ordinary drill bit, more wear-resistant..
  • ❹NON-SLIP 1/4 HEX SHANK: 1/4 hex shank which makes the electric dril.
  • ❺WIDELY USED: It can be used for drilling walls, bricks, wood, glass, tiles, stainless steel, concrete, etc. Remember to add Water or coolant when drilling..
Check Stock

Dremel 9909 Tungsten Carbide Cutter,Silver

  • The product is 1/8" Diameter, Tungsten Carbide Cutter.
  • Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods..
  • A high-speed cutter made of tungsten carbide, the hardest material next to diamonds..
  • Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. The tungsten carbide surface can easily catch the side of a hole and break the bit..
  • For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit..
Check Stock

12 pcs Concrete Drill Bit and Masonry Drill Bit Set，Carbide Drill Bit, Diamond Drill Bits and Tile Drill Bits Suitable for Tile/Concrete/Brick/Glass/Plastic/Wood etc.

  • ❶HIGH-QUALITY HARD ALLOY: The cutter head is made of cemented carbide. Hardness up to 45HRC, Triangular cutter head resistance is smaller. And it can improve work efficiency, higher hardness than ordinary drill bit, more wear-resistant..
  • ❷EXQUISITE CRAFTSMANSHIP: The surface of the drill bit is treated by fine polishing, and the new electroplating process can prevent the drill bit from rusting and prolong the life of the drill bit..
  • ❸15 PCS DRILL BIT SET WITH 6 DIFFERENT SIZES: 5/32” (4mm), 3/16” (5mm),1/4” (6mm), 5/16” (8mm) ,3/8” (10mm), 1/2” (12mm) fit your different needs..
  • ❹NEW DESIGN: U-shaped drain groove, spiral handle design, easy to remove chips during work, smoother drilling..
  • ❺WIDELY USAGE: It can be used for drilling walls, bricks, ceramic, wood, glass, tiles, stainless steel, concrete, etc. Remember to add Water or coolant when drilling..
Check Stock

Hegebeck Forstner Drill Bit, 22mm Carbide Woodworking Hole Saw, Wood Drilling Cutter Boring Drill Bits with Round Handle, for Wood, Plastic, Plywood, Orange, 1pcs

  • 【Specifications】- Drilling diameter: 22mm / 0.87 inch.
  • 【Feature】- Hegebeck forstner drill bit is made by cemented carbide cutter and high-quality carbon structural steel (45# steel) body. Wood cutter has the specfictions like sharp edge, high hardness, accurate positioning, high precision, smooth cutting, impact resistance, high toughness..
  • 【Special Design】- The X-shaped design offers high visibility and a precise cutting effect. Sharp cutting edge, high hardness, non-burrs and durable use. Arc curve design head for easy chip-removal, more efficient perforation..
  • 【Advantage】- With highly hardness and excellent workmanship design, these wood auger drilling bit will reduce drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably..
  • 【Applications】- Forstner drill bit is for ordinary purpose. Can be used for drilling holes on wood and plastic products, furniture, door hinge.
  • Used on cutting wood, plywood, solid wood boards, MDF, plastics, fiberglass etc..
Check Stock

DEWALT Masonry Drill Bit Set, Percussion, Concrete & Block, 7-Piece (DW5207)

  • 2 cutter carbide tip of masonry drill bit set maximizes carbide surface contact for longer bit life..
  • Four flute design cleans debris out for fast, efficient drilling.
  • Three flats on shank eliminate bit slipping in chuck (except DW5232, DW5233, DW5237, DW5238).
  • Rock carbide tip maximizes carbide surface contact for longer bit life.
  • Four-flute design cleans debris out for fast, efficient drilling.
  • Three flats on shank eliminate bit slipping in chuck.
  • For use with electric or cordless hammerdrills.
  • Ideal for drilling holes in brick, block, concrete, and masonry.
Check Stock

15 pcs Black Masonry Drill Bits Set, Mgtgbao Ceramic Tile Drill Bits Carbide Tip for Glass, Brick, Tile, Concrete, Plastic and Wood with Size 4mm,5mm,6mm,8mm,10mm,12mm

  • ❶HIGH-QUALITY HARD ALLOY: The cutter head is made of cemented carbide. Hardness up to 45HRC, Triangular cutter head resistance is smaller. And it can improve work efficiency, higher hardness than ordinary drill bit, more wear-resistant..
  • ❷EXQUISITE CRAFTSMANSHIP: The surface of the drill bit is treated by fine polishing, and the new electroplating process can prevent the drill bit from rusting and prolong the life of the drill bit..
  • ❸15 PCS DRILL BIT SET WITH 6 DIFFERENT SIZES: 5/32” (4mm), 3/16” (5mm),1/4” (6mm), 5/16” (8mm) ,3/8” (10mm), 1/2” (12mm) fit your different needs..
  • ❹NEW DESIGN: U-shaped drain groove, spiral handle design, easy to remove chips during work, smoother drilling..
  • ❺WIDELY USAGE: It can be used for drilling walls, bricks, ceramic, wood, glass, tiles, stainless steel, concrete, etc. Remember to add Water or coolant when drilling..
Check Stock

25 pcs Black Masonry Drill Bits Set, Mgtgbao Ceramic Tile Drill Bits Carbide Tip for Glass, Brick, Tile, Concrete, Plastic and Wood with Size 4mm,5mm,6mm,8mm,10mm,12mm

  • ❶HIGH-QUALITY HARD ALLOY: The cutter head is made of cemented carbide. Hardness up to 45HRC, Triangular cutter head resistance is smaller. And it can improve work efficiency, higher hardness than ordinary drill bit, more wear-resistant..
  • ❷EXQUISITE CRAFTSMANSHIP: The surface of the drill bit is treated by fine polishing, and the new electroplating process can prevent the drill bit from rusting and prolong the life of the drill bit..
  • ❸25 PCS DRILL BIT SET WITH 6 DIFFERENT SIZES: 5/32” (4mm), 3/16” (5mm),1/4” (6mm), 5/16” (8mm) ,3/8” (10mm), 1/2” (12mm) fit your different needs..
  • ❹NEW DESIGN: U-shaped drain groove, spiral handle design, easy to remove chips during work, smoother drilling..
  • ❺WIDELY USAGE: It can be used for drilling walls, bricks, ceramic, wood, glass, tiles, stainless steel, concrete, etc. Remember to add Water or coolant when drilling..
Check Stock

7 Piece Masonry Drill Bits Set 1/8\-1/2\ Concrete Drill Bit with Professional Tungsten Steel Alloy Tip for Tile Brick Cement Concrete Glass Plastic with Industrial Strength Carbide Tip

  • ❶NEW DESIGN: U-shaped drain groove, spiral handle design, easy to remove chips during work, smoother drilling. 10 pcs drill bit set with 5 different sizes: that is3/16” (5mm),1/4” (6mm), 5/16” (8mm) ,3/8” (10mm), 1/2” (12mm) fit your different needs..
  • ❷EXQUISITE CRAFTSMANSHIP: The surface of the drill bit is treated by fine polishing, and the new electroplating process can prevent the drill bit from rusting and prolong the life of the drill bit..
  • ❸HIGH-QUALITY HARD ALLOY: The cutter head is made of cemented carbide. Hardness up to 45HRC, Triangular cutter head resistance is smaller. And it can improve work efficiency, higher hardness than ordinary drill bit, more wear-resistant..
  • ❹NON-SLIP 1/4 HEX SHANK: 1/4 hex shank which makes the electric drill more tight and not easy to slip Making it safer to use.
  • ❺WIDELY USED: It can be used for drilling walls, bricks, wood, glass, tiles, stainless steel, concrete, etc. Remember to add Water or coolant when drilling..
Check Stock

10pcs Black Concrete Drill Bit Set, Mgtgbao Tile Drill Bits Carbide Tip for Glass, Brick, Tile, Concrete, Plastic,Ceramic and Wood with Size 4mm,5mm,6mm,8mm,8mm,10mm,12mm

  • ❶HIGH-QUALITY HARD ALLOY: The cutter head is made of cemented carbide. Hardness up to 45HRC, Triangular cutter head resistance is smaller. And it can improve work efficiency, higher hardness than ordinary drill bit, more wear-resistant..
  • ❷EXQUISITE CRAFTSMANSHIP: The surface of the drill bit is treated by fine polishing, and the new electroplating process can prevent the drill bit from rusting and prolong the life of the drill bit..
  • ❸10 PCS DRILL BIT SET WITH 6 DIFFERENT SIZES: 5/32” (4mm), 3/16” (5mm),1/4” (6mm), 5/16” (8mm) ,3/8” (10mm), 1/2” (12mm) fit your different needs..
  • ❹NEW DESIGN: U-shaped drain groove, spiral handle design, easy to remove chips during work, smoother drilling..
  • ❺WIDELY USAGE: It can be used for drilling walls, bricks, ceramic, wood, glass, tiles, stainless steel, concrete, etc. Remember to add Water or coolant when drilling..
Check Stock