Categories

Best Drive Shaft Thread Repair

Large-Eye Stitching Needles for Leather Projects with Clear Bottle, 20 Pack

  • 20 Pieces stitching needles set: needle length is 5.2 cm, 20 pieces craft needles in the clear bottle which keep the needle secure and organize well.
  • Easy to handle: with extra long eye, peaked tip and thick shaft, the stitching needles are easy to thread yarn through even without a threader.
  • Sturdy large-eye needles: made of stainless steel, they are sturdy enough for leather working, and some thick clothes or shoes repair, vinyl upholstery mend.
  • Smooth surface: the steel material is polished enough to give a smooth stitch.
  • The embroidery hand needles can weave in ends and sew up seams on knit and crochet projects.
  • Large eye hand needles: these needle with large eye is easy to thread by hand even for a person with poor eye sight and poor coordination with her handsDescription.
  • Outus metal stitching needles for leather projects with clear bottle, 20 pack.
  • 20 Pieces craft needles store in one clear bottle. Large-eye stitching needles length are 5.2 cm, they are good for leather working, and some thick clothes or shoes repair..
  • With extra long eye, peaked tip and thick shaft, the stitching needles are easy to thread yarn through even without a threader..
Check Stock

E-Z LOK EZ-329-6 Thread Repair Kit for Metal Carbon Steel Threaded Inserts 3/8-16 and Installation Tools

  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in metals with this thread repair tool kit..
  • CARBON STEEL INSERTS – Kit includes standard carbon steel threaded inserts that are easy to install with standard tools..
  • FOR USE WITH APPLICATIONS – The metal threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • KIT INCLUDES – Convenient kit includes threaded inserts for metal, drill, tap, and threaded insert installation drive tool..
Check Stock

uxcell 5/16 Inch Diameter x 3 Inch Length Landing Gear Steel Axle Shaft Drive Axle with Nuts for RC Airplane - 4PCS

  • FEATURES: Item Name: Landing Gear Steel Drive Shaft Drive Axle. Usage: for RC Airplane landing gear..
  • ITEM SPECIFICS: Thread Diameter: 8mm(5/16").
  • COMPATIBLE WITH: Vehicles & Remote Control, Helicopters.
  • ADVANTAGE: High strength steel material, excellent workmanship, Suitable for fixed wing model landing gear..
Check Stock

uxcell 5/32 Inch Diameter x 1.7 Inch Length Landing Gear Steel Axle Shaft Drive Axle with Nuts for RC Airplane - 2PCS

  • FEATURES: Item Name: Landing Gear Steel Drive Shaft Drive Axle. Usage: for RC Airplane landing gear..
  • ITEM SPECIFICS: Thread Diameter: 4mm(5/32").
  • COMPATIBLE WITH: Vehicles & Remote Control, Helicopters.
  • ADVANTAGE: High strength steel material, excellent workmanship, Suitable for fixed wing model landing gear..
Check Stock

6 Sets High Torque Quartz Clock Movement Mechanism Kit Long Shaft Clock Movement Parts Mechanism with Different Clock Hands Quartz Clock Movement Mechanism for DIY Clock Repair Parts Replacement

  • Clock replacement repair kit: you will receive 6 pieces of high torque long shaft clock movements and 12 different pairs of hands, these replacement....
  • Size details: the total shaft length measures approx. 13 mm/ 0.51 inch, and the thread length measures approx. 5 mm/ 0.2 inch.
  • Clock hands and motor kit: the long shaft clock mechanism provides extremely high accuracy and reliability, and these clock hands and motor kits have....
  • Wide usage: these long shaft clock movement repair and replacement parts are suitable for making and repairing DIY quartz wall clocks, and they are....
  • 6 Different styles of hands: this clock mechanism replacement set comes with 6 pairs of clock hands in different styles and length, each style has a....
Check Stock

YXT WB26X10143、SSM-16HR Oven Microwave Turntable Motor Carousel Synchronous Motor AC21V 3W 2.5/3 RPM （1 PCS）

  • Part Number： WB26X10143 SSM-16HR Microwave with "D" shaft Turntable Drive Motor （Shaft Diameter: 7mm/0.28in, Shaft Length: 9mm/0.35 in） Non-OEM,....
  • Electrical parameters: AC frequency: 50/60HZ voltage: 21AC power: 3W speed: 2.5/3r/min rotation direction: CW/CCW class: E When purchasing, please....
  • Replacement part number: WB26X10143 replacement (6549W1S011B, SSM-16HR, ).
  • Suitable brands/models: GE ST16FE EX73SAAA3 WB26X10143 and LG 721.63252301 721.63254301 MPDJ030BF JES35BJ JES738WJ02.
  • The drive motor is located under the glass microwave turntable. Before starting this repair, make sure to disconnect the microwave power. Just use a....
Check Stock

Axle Spindle Rethreading Tool Set Repair/Cleaning Threading Tools High-Strength Tools Set Easy To Store Thread Restorer Use With 1-1/4\ Socket Mechanic Tool Set For M20,22,24 13/16 3/4 x 20 UNEF 8pc

  • 【Used For Axle Threads Repair/Cleaning/Rethreading Tool Set】Axle spindle rethreading tool set can be used to repair/clean the axle threads on the spindle, effectively clean the rust and dirt on the thread, repair the worn thread,and recover the clear thread line. It is the best tool for cleaning axle threads..
  • 【Suitable For a Variety Of Thread Specifications & Wide Range Of Applications】Threading tools are suitable for a variety of thread specifications, including axle threads on the spindles of eight common mold sizes:M24 x 1.50, M24 x 2.00, M22 x 1.00, M22 x 1.5, M20 x 1.25, M20 x 1.50, 13/16" x 20UNEF, 3/4" x 20UNEF, and widely applicable, suitable for most vehicles..
  • 【Can Be Used With 1-1/4" Socket Or Wrench & High-Strength/Durable High-Quality Steel Material】Thread restorer mechanic tool sets can be used with 1-1/4" socket or wrench to help better repair/clean shaft threads ,save time and energy. Made of high-quality steel, with high strength and durability, it can provide long-term service and reduce the cost of frequent tool replacement.(package does not contain 1-1/4" socket or wrench. ).
  • 【Easy To Carry/Store】Thread restorer kit is packed in a high-quality plastic box, you can easily take it anywhere, and it is easy to store....
Check Stock

NEW OEM Produced for Electrolux Frigidaire Whirlpool 519306005 241577505 Refrigerator Inverter Control Board by OEM Mania Replacement Part - 1 YEAR WARRANTY

  • 【W10324647 Tub Seal】1PCS Washer Tub Seal Assembly W10324647. Tub seal assembly W10324647 prevents water from leaking around the drive shaft that goes through the bottom of the washer tub..
  • 【Tub Seal W10324647 Replace】 W10006371,1877231,W10324647,AP4567772,PS3407958,EAP3407958,AH3407958,EA3407958.
  • 【W10324647 Mode Reference】 MVWC415EW1,11020022010,11020022011,11020022012,11020022013,11020022014,7EWTW1300YM0,7EWTW1409YM0,7EWTW1515YW0,7EWTW1715YW0,7MKTWS300DW0,7MKTWS400DW0.
  • 【W10324647 Repair & Advice】 1.Removed top outer tub liner and agitator, next removed tub. 2.Removed drive belt and motor disconnected wire harness from motor, capacitor and pump. 3.Removed agitator gears, transmission assembly,old tub seal. 4.Cleaned area for seal. Applied gre ase to new seal. Insert new seal. Reverse above steps..
  • 【Repair Solution for Washing Machine Tub Seal】 Leaking water, not washing properly, unusual noises, shaking and moving,Tub leaked ruined bearing,Louder than normal in spin cycle,Leaking under tub next to shaft spline..
Check Stock

4 Pieces Long Shaft Clock Movements Clock Hands Mechanism High Torque Mechanism with 5 Different Pairs of DIY Clock Repair Parts Replacement for Clock Repair Replacement

  • DIY clock repair kit: you will get 4 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit....
  • Size details: the total shaft length is approx. 20 mm/ 0.8 inches, and the thread length is approx. 14.6 mm/ 0.57 inches.
  • Accurate time keeping and quiet motor: the long shaft clock mechanism offers great accuracy and dependability, they are equipped with sweeping motion,....
  • Wide application: these clock repair replacement parts are fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and....
  • 5 Different styles of hands: this clock mechanism replacement set comes with 5 pairs of clock hands in different styles and length for your options,....
Check Stock

SSM-16HR Oven Microwave Turntable Motor Carousel Synchronous Motor AC21V 3W 2.5/3 RPM WB26X10143、6549W1S011B（1 PCS）

  • Part Number： Non-OEM,Microwave with "D" shaft Turntable Drive Motor（Shaft Diameter: 7mm/0.28in, Shaft Length: 9mm/0.35 in） SSM-16HR....
  • Electrical parameters: AC frequency: 50/60HZ voltage: 21AC power: 3W speed: 2.5/3r/min rotation direction: CW/CCW class: E When purchasing, please....
  • Replacement part number: WB26X10143 replacement (6549W1S011B, SSM-16HR, ).
  • Suitable brands/models: GE ST16FE EX73SAAA3 WB26X10143 and LG 721.63252301 721.63254301 MPDJ030BF JES35BJ JES738WJ02.
  • The drive motor is located under the glass microwave turntable. Before starting this repair, make sure to disconnect the microwave power. Just use a....
Check Stock

2Pcs Clock Mechanism - Clock Mechanism Replacement - Quartz Clock Movement Replacement,Clock Kit Motor Replacement Mute Design DIY Repair Clock Parts with 5 Set Clock Hands No Battery

  • DIY clock repair kit: you will get 2 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit....
  • Size: the total shaft length is approx.16 mm/ 0.63 inches, and the thread length is approx. 9 mm/ 0.35 inches.
  • Jump second movement is suitable for 5....
  • Accurate time keeping and quiet motor: the long shaft clock mechanism offers great accuracy and dependability, equipped with sweeping motion, no....
  • Wide application: these clock repair replacement parts fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and....
  • 5 Different styles of hands: this set comes with 5 pairs of clock hands in different styles and length for your options, great for clock creations and....
Check Stock

ATPEAM 9-Way Slide Hammer Puller Set | Wrench Adapter Axle Bearing Hub Auto Set, Axle Front Rear Wheel Bearing Dent Hub Gear Puller Remover Set

  • ...ng and wheel hub out of the tight position, and make sure this tool set a longer lifespan..
  • A Complete Puller Set: 1x shank and T-bar assembly, 1x 4.8 lb. sliding hammer weight, 1x cross nut, 2x hub grappler adapter flanges, 1x large forcing screw, 1x cone, 1x 3-way puller head, 1x vise grip adapter with double lead thread, 1x seal hook adapter, 1x dent puller retainer, 1x self-tapping screw, 3x 5 inch (127 mm) internal and external jaw bars, 3x hex jaw nuts, 3x hex head cap screws, and 1x blow molded storage case..
  • Auto Body Repair Tool Set: The slide hammer bearing puller kits are body shop tools that are used to aggressively remove tightly jammed parts or dents.
  • slide hammers consist of a long metal shaft with an attachment point at one end, a heavyweight that slides along the shaft, and a handle with a stop on the opposite end.
  • this hammer tool slide kit includes 2 jaws and 3 jaw internal and external pullers, rear axle bearing puller tool, locking plier adaptor, puller hook, and auto dent puller tool.
  • Wide Application: The 9-way slide hammer puller set with 4.8 lb slide hammer is ideal for a variety of pulling applications, including flange-type rear axles, most front-wheel-drive hubs, pulling dents, and other press-fit parts (bearings, bushings, g....
Check Stock

2 Pieces High Torque Long Shaft Clock Movement Mechanism with 5 Different Pairs of Hands DIY Clock Repair Parts Replacement

  • DIY clock repair kit: you will get 2 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit well to different styles of clock frame, good for repairing, replacing or making a clock by yourself.
  • Size: jump second movement is suitable for 9-13 mm/ 0.35 - 0.51 inches thickness of clock panel, the total shaft length is approx. 20 mm/ 0.8 inches, and the thread length is approx. 13 mm/ 0.51 inches.
  • Accurate time keeping and quiet motor: the long shaft clock mechanism offers great accuracy and dependability, equipped with sweeping motion, no ticking and will provide you with a quiet environment.
  • Wide application: these clock repair replacement parts fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable to be applied as DIY quartz wall clock replacement movement parts.
  • 5 Different styles of hands: this set comes with 5 pairs of clock hands in different styles and length for your options, great for clock creations and repairs while also providing a decorative effect.
Check Stock