Categories

Best Drop Forged

Performance Tool BC-18 18-Inch Bolt Cutter

  • Precision milled and drop forged steel jaws.
  • Drop forged heat treated alloy steel construction handles.
  • Rubber hand grips for comfort and control.
  • Maximum cutting capacity: 5/16 in. (8mm).
Check Stock

Axe

  • Our interpretation of the classic Chinese hatchet.
  • Stylish and iconic hatchet is as eye catching as it is durable.
  • Features a differentially heat treated, drop-forged 1055 Carbon Steel head, which has a hard edge capable of reaching razor sharpness, but a soft steel body for absorbing impact.
  • Specifications: 21 oz head weight, 32 oz overall weight, 20 1/4" overall length.
Check Stock

Marson 39000 HP-2 Professional Hand Riveter

  • Square shoulder fulcrum pin of cold-formed heat treated steel prevents pin rotation that can elongate the engaging holes and cause premature tool failure in imitation tools.
  • Handles have cushion-molded vinyl grips for comfort.
  • Thick cushion-molded vinyl grips for comfort.
Check Stock

Maasdam Power Pull 453-CAL-1 1 ton Capacity, 3/16\ Wire Size, 12' Lifting height, Power Puller Lever Hoist with Steel Handle

  • Precision-cast aluminum alloy ratchet wheel - one piece construction.
  • Interlocking, precision fit, steel alloy pawls with safety spacer sleeve.
  • Drop-forged steel slip hooks with OSHA recommended safety latches.
  • Heavy gauge steel, reinforced ratchet guard.
  • Forged Steel Hools with OSHA Recommended Safety Latches.
  • Reliable Stainless Steel Springs. Double Locking Drive Pawls..
  • Oversized Steel Safety Guard. Automatic Let-Down with Safety Catch.
  • Cable Guide Guards against Excessive Wear.
  • Galvanized, aircraft quality cable. Drop-Forged steel frame galvanized against rust.
Check Stock

Cold Steel Axe Gang Hatchet, One Size

  • Our interpretation of the classic Chinese hatchet.
  • Stylish and iconic hatchet is as eye catching as it is durable.
  • Features a differentially heat treated, drop-forged 1055 Carbon Steel head, which has a hard edge capable of reaching razor sharpness, but a soft steel body for absorbing impact.
  • Specifications: 21 oz head weight, 32 oz overall weight, 20 1/4" overall length.
Check Stock

Cold Steel 90PHH Pipe Hawk Frontier Hawk, One Size

  • Offers a long, wide cutting edge and a solid, fully hardened hammer poll that’s turned and ribbed to mimic a traditional hollow pipe bowl.
  • Heavy enough to be effective as a chopping tool, plus, its solid bowl will drive nails, spikes and stakes with the power of a framing hammer.
  • Made of tough and durable drop forged 1055 carbon steel (Note: Sheath sold separately).
Check Stock

Cold Steel Spike Hawk Frontier Hawk, One Size

  • Features a differentially heat treated and drop forged blade and tough steel spike.
  • This unusual hawk is very popular with sport throwers, who admire its ability to deeply stick into wooden targets by blade or by spike, effectively doubling the chances of a successful throw.
  • Made of tough and durable drop forged 1055 carbon steel (Note: Sheath sold separately).
  • Face the edge in brutal chopping, cutting, slashing and gouging attacks.
Check Stock

MAXPOWER 14-Inch Heavy Duty Bolt Cutter, Hardened Chrome Molybdenum Steel Blade, Ergonomic Rubber Handle

  • Warm Tip: 14-inch Bolt Cutter NOT Recommend for Cutting Locks or Hard Metal.
  • Max Cutting Capacity 13/64-inch (5mm), Blades adjustable with screws.
  • Small Bolt cutter suit for cutting wire, nails, bolts, barb wire and most soft metals.
  • Made of Drop forged Cr-Mo blades and Heat-treated, and Drop forged joint arms.
  • Rubber hand grips for comfort and control, anti-rust finish.
Check Stock

MAXPOWER Bolt Cutter 30 inch, Max Jaw Opening 13/16\

  • Heavy duty bolt cutters 30 inch, Max Jaw Capacity 13/16 inch ( 20 mm ), Cutting capacity 3/8" ( 10mm ) for hardened steel stick.
  • Center cut bolt cutters feature blades that are beveled on both sides and are equidistant from each other. Suit for cutting through cables, pipes, padlock, and metal rods.
  • Precise blade alignment, built-in adjustment bolt provides greater power with less effort.
  • Drop forged Cr-Mo blades and Heat-treated, and Drop forged joint arms.
  • Non-slip Rubber handle for maximize comfort and control.
  • MAXPOWER 30 inch Bolt cutter, Overall length 30 inch(760mm), Working length 24 inch (600mm), weight 7.94lb.
Check Stock

Wilton B.A.S.H 6-1/2' Utility Vise and 4 lb. Sledge Hammer Combo (11128BH)

  • DURABLE SURFACE: Distinctive green powder coat paint on vise resists scratches and provides a tough surface..
  • TRADEMARK GREEN HEAD: Hi-vis, drop-forged 46 HRC steel hammer head endures the most demanding applications..
  • HAMMER INCLUDES: Unbreakable handle technology, safety plate, ergonomic no-slip grip, and a lanyard hole..
  • VISE INCLUDES: Swivel base, built-in pipe jaws, and a large anvil work surface..
  • TRADEMARK GREEN HEAD: Hi-vis, drop-forged 46 HRC steel head endures the most demanding applications..
Check Stock

Southwire MPSCP 6-In-1 Multi-Tool Side Cutting Plier, Multifunctional, Ideal For Stripping 8-14 AWG Solid Wire And 10-16 Stranded Wire

  • Drop forged constructed 6-in-1 linewsman's multi-tool Plier cuts ACSR, screws, nails and most Hardened wire.
  • Drop forged construction for lasting performance and durability.
  • Strips 8-14 AWG solid wire and 10-16 stranded wire.
  • Comfortable grip handles to reduce hand wear and fatigue.
Check Stock

IRWIN Tin Snip, Flat Blade, 12-inch (22012)

  • Snip tool cuts up to 20-gauge cold-roll steel and 22-gauge stainless-steel.
  • Snip tool features a flat blade that cuts straight and wide curves.
  • Precision-ground edges on the tin snips ensure a tight grip on each cut for superior cutting quality.
  • Hot, drop-forged steel blades provide maximum strength and long life.
  • Durable spring washer holds blades tightly against each other when cutting.
Check Stock

Midwest Tools and Cutlery MWT-6510C Midwest Snips Forged Blade Offset Aviation Snips Set (Pack of 2)

  • Cuts "Pinch-Thru-Point" Precision cuts completely to blade tip end which reduces cutting strokes and enables complete and accurate trim cuts.
  • Two piece offset aviation set include both left and right cut models. A favorite of professional sheet metal tradesman and contractors.
  • Blades are hot drop-forged of molybdenum alloy steel and austemper heat-treated. Hot drop-forged process produces maximum strength.
  • Cut Length: 1-1/4" Cutting Capacity (CR/SS): 18/22.
  • New KUSH-N-POWER grip features a dynamic contour finger stop, soft touch and non-slip ribs.
Check Stock