Categories

Best Drum Pump Rotary

Shurflo Industrial Pump 2088-594-154 w/ (2) Shurflo 1/2\ Swivel Fittings (234-2926)

  • Rotary drum pump for dispensing lubricating oils, fuel oils, and antifreeze.
  • Cast iron and cast aluminum body with steel vanes and buna-n seals.
Check Stock

Action Pump 3005 Cast Iron Rotary Drum Pump, 10 GPM

  • Rotary drum pump for dispensing lubricating oils, fuel oils, and antifreeze.
  • Cast iron body, steel tubes, and Viton seals.
Check Stock

Action Pump 3004 Ryton Rotary Drum Pump, 8 GPM

  • Rotary drum pump for dispensing chemicals.
  • Ryton (PPS) body for high temperature rigidity and resistance to chemicals and flame, 304 stainless steel components and PTFE seal for resistance to chemicals and corrosion.
  • 1" NPT suction port and 3/4" UNF discharge port.
Check Stock

Action Pump FM-81 FM Approved Hand Operated Rotary Drum Pump

  • Rotary drum pump for dispensing flammable liquids.
  • Cast iron body for strength and durability with aluminum nozzle for lighter weight and corrosion resistance and neoprene dispensing hose.
Check Stock

Action Pump 9005HT High Flow Aluminum Rotary Drum Pump, Steel Vane, 27 GPM

  • Rotary drum pump for dispensing lubricating oils, fuel oils, and antifreeze.
  • Cast iron and cast aluminum body with steel vanes and buna-n seals.
Check Stock

TEMO 100 pc 1/2 Inch Sand Drum Grit 60 Coarse with 2 pc 1/8 Inch Mandrel Compatible for Dremel Rotary Tools

  • 100 PC 1/2" (12.7mm) sand drum with 2 Mandrel Compatible for dremel grit 60 coarse.
  • 100 piece 1/2" (12.7mm) 60 Grit, 1/2" (12.7mm) Diameter.
  • 2 piece 1/2" (12.7mm) X 1/2" (12.7mm) Rubber Mandrels.
  • 1/8" (3.175mm) shank size (Compatible for Dremel and other Rotary Tools).
  • Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing..
  • 3. Rotary tools can operate at very high RPM. High RPM with a small tool such as a sanding drum produces a lot of friction and heat build up. Ensure that your sand drum and mandrel is not getting too hot. Consider using medium speed and alternating mandrels as you change sand drums out to reduce heat build up.003cbr003e4. Rotary tools are power tools. Always consider appropriate eyewear and other PPE to suit your task..
  • US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check Stock

TEMO 100 pc 1/4 Inch Sand Drum Grit 60 Coarse with 2 pc 1/8 Inch Mandrel Compatible for Dremel Rotary Tools

  • 100 PC 1/4" (6.35mm) sand drum with 2 Mandrel Compatible for dremel grit 60 coarse.
  • 100 piece 1/4" (6.35mm) 60 Grit, 1/4" (6.35mm) Diameter.
  • 2 piece 1/4" (6.35mm) X 1/2" (12.7mm) Rubber Mandrels.
  • 1/8" (3.175mm) shank size (Compatible for Dremel and other Rotary Tools).
  • Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing..
  • 3. Rotary tools can operate at very high RPM. High RPM with a small tool such as a sanding drum produces a lot of friction and heat build up. Ensure that your sand drum and mandrel is not getting too hot. Consider using medium speed and alternating mandrels as you change sand drums out to reduce heat build up.003cbr003e4. Rotary tools are power tools. Always consider appropriate eyewear and other PPE to suit your task..
  • US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check Stock

TERA PUMP Chemical Resistant Fast Transfer 10 GPM Rotary-Action Drum Pump for 15 to 55 Gallon Drum Barrels

  • [ Ideal Liquids ] Ideal for dispensing water based solutions of acid, alkalis and salt, water and all petroleum products (Not Gas), most organic acids, solvents, waxes, planting solution, detergents and water-soluble inorganic chemicals - Useful in the garage, shop, yard, farm, dock, snow or campsite - Rotary-Action: Manual piston allows easy to use oil transfer without the need for electricity.
  • [ Compatibility ] For use with 50 - 205-Liters Drum Barrels or 15 to 55 Gallon Drums, 15 Gallon Drums: Remove the middle segmented tube, 30 to 55 Gallon Drums: 3pc suction tube must assembled for 55 Gallon Drums - Adjustable Height bung adaptor for use on drums with 2-inch openings - To initiate fluid transfer, start pumping the lever until fluids are flowing from the discharge spout.
  • [ Sturdy ] Constructed of Glass-filled polypropylene pump with Ryton Vane and Viton seal and backed by a 1 year manufacturer warranty.
Check Stock

Coceca 458pcs Sanding Drums for Drum Sander, Kit with 432pcs Sanding Band Sleeves 24pcs Drum Mandrels 2pcs Self-Tightening Drill Chuck

  • Package contains: 458 pieces of rotary sanding bands, 24 packs of rotary sanding drum mandrels and 2 packs of self-tightening drill chuck..
  • 6 grits accessories: six types of sanding drum grits, 80 grit, 120 grit, 240 grit, 320 grit, 400 grit and 600 grit..
  • Size: three sizes of sanding drum sleeves, 1/2 inch, 3/8 inch and 1/4 inch..
  • Wide application: this rotary tool sanding accessories set would meet almost all your requirements in nut-carving, metal, wood, plastic, jade, circuit board and other DIY processing..
  • Easy to use: just need to slide the sanding drums into the drum sander, make sure the drum has been screwed tightly, you can directly start your project..
Check Stock

Woohome 574 PCS Sanding Drum and Sleeve Set Spindle Sanding Including 540 PCS Sanding Band Sleeves, 30 PCS Drum Mandrels, Wrench for Dremel Rotary Tool

  • Package include: 540 PCS of rotary sanding bands, 30 PCS rotary sanding drum mandrels, 3 PCS of self-tightening drill chuck, 1 PCS small wrench..
  • 6 Grits rotary sanding bands: 80 grit, 120 grit, 240 grit, 320 grit, 400 grit and 600 grit, 6 grits in 3 size, each size 30PCS..
  • Sanding drum mandrels: diameter is 1/2 inch, 3/8 inch and 1/4 inch, 2 size thickness, each size 5 PCS (size as the picture shows).
  • Easy to use: just need to slide the sanding drums into the drum sander, make sure the drum has been screwed tightly, you can directly start your project..
  • Wide application: Application to electric grinding,handing mill,mind mill polishing grinding the metal and wood, jade, emerald, glass, agate..
Check Stock

Action Pump QS-1 Pro-Lube Hand Operated Drum Pump, Rotary Action, Max Pressure 10 psi, Max Viscosity 2000 SSU, Inlet Size 3/4 in FNPT, Outlet Size 1/2 in FNPT, for Use On 15 to 55 gal. Drums

  • Rotary drum pump for dispensing petroleum based liquids such as oils, diesel, and kerosene.
  • Steel body with aluminum and nitrile components.
Check Stock

Samfox 20pcs Spindle Sanding Drum Sander Tool Kit Set with Case for Drill Press

  • ..., polish jade and other art materials, or contour irregular shapes into your projects with the 20 Piece Drill Press Sanding Drum Kit.
  • Use these drum sanders for woodworking and metalworking.
  • All pieces are packaged in a plastic blow-molded case for convenient storage, safe travel, and easy organization.
  • PERFECT SIZE ROTARY SANDING DRUMS FOR YOUR NEEDS: This drill press drum sander kit includes 4 reusable barrel sander arbor drum sander bit attachments that can fit your tools.
  • Each sanding bit provides a different diameter to meet your needs..
  • FITS YOUR TOOLS: Ideal for use with your rotary tools such as drill presses, spindle sanders, hand drills, or flexible shaft attachments.
  • Easily screw the shank of one of the sanding drill bit attachments into your tool then slip the correct sized sanding band over the mandrel and begin using your tool.
  • REPLACEMENT SANDING SLEEVES: Not only does this drill sander kit include 4 reusable rotary tool sanding drums, but it also includes 4 replacement sandpaper bands for each size mandrel for a total of 16 sanding bands.
  • Each size features two 80 and two 120 sand paper grits to meet your needs.
  • BUILT TO LAST: The 4 drill sanding attachment bits are designed for strength, and longevity.
Check Stock

162pcs Sanding Drum Kit, Sanding Bands Sleeves for Drum Sander with Drum Mandrels for Rotary Tool

  • ...lish jade and other art materials, or contour irregular shapes into your projects with the ABN 20 Piece Drill Press Sanding Drum Kit.
  • Use these drum sanders for woodworking and metalworking.
  • All pieces are packaged in a plastic blow-molded case for convenient storage, safe travel, and easy organization.
  • PERFECT SIZE ROTARY SANDING DRUMS FOR YOUR NEEDS: This drill press drum sander kit includes 4 reusable barrel sander arbor drum sander bit attachments that can fit your tools.
  • Each sanding bit provides a different diameter to meet your needs: 1/2-inch, 3/4-inch, 1-inch, and 1-1/2 inch (1.27 cm, 1.9 cm, 2.54, and 3.8 cm).
  • FITS YOUR TOOLS: Each drill drum sander attachment bit features a 1-inch (2.54 cm) long steel shank that fits your 1/4-inch (.64 cm) tools.
  • Ideal for use with your rotary tools such as drill presses, spindle sanders, hand drills, or flexible shaft attachments.
  • Easily screw the shank of one of the sanding drill bit attachments into your tool then slip the correct sized sanding band over the mandrel and begin using your tool.
  • REPLACEMENT SANDING SLEEVES: Not only does this drill sander kit include 4 reusable rotary tool sanding drums, but it also includes 4 replacement sandpaper bands for each size mandrel for a total of 16 sanding bands.
Check Stock