Categories

Best Drywall Steel Framing

Dynatex 49292 Low Volatile RTV Silicone Gasket Maker, 0 to 650 Degree F, 300mL Cartridge, Red (Pack of 12)

  • HIGH YIELD! Top plate to attic drywall air sealing is consistently ranked as the #1 air sealing location. Great Stuff Pro Gasket forms a seal between framing lumber and drywall, which can result in up to 1.6 ACH50 reductions. Gasket Foam has a high yield of approximately 250 linear feet or more at ½” wide bead and helps reduce moisture and pollutants..
  • FLEXIBLE SEALANT! Great Stuff Pro Gasket is a flexible, water based, one component foam designed to form an interior gasket between framing lumber and drywall, which improves air sealing performance. Material is applied and allowed to dry to the face of the top plate, bottom plate and around the perimeter of all rough openings before installing drywall. The unique gasket performance allows product use without any changes to construction sequencing..
  • EASY TO USE! Shake the can vigorously for 60 seconds before use. Apply to face of top plate, bottom plate and around rough openings. Gasket Foam air cures in 2 to 24 hours and withstands scrapping and rubbing when drywall is installed. If the can is not finished after the job is done, leave it on the can and close the valve until the next use. Gasket Foam is reusable for up to 90 days when left attached to Great Stuff Pro Gasket Gun with the blue handle..
Check Stock

DS-45 Drywall Shim

  • Multi-use shim for floating butt joints, framing irregularities, shimming drywall, hanging cabinets and doors.
  • Saves time by shimming drywall to allow greater inset at joints and ensures maximum bonding of tapes with drywall.
Check Stock

GREAT STUFF PRO Flexible Drywall Gasket - 18 oz, One Component, Water Based, Air Cured, Drywall Sealant. Pack of 6. for Use Only with Great Stuff Pro Gasket Dispensing Gun (Included)

  • HIGH YIELD! Top plate to attic drywall air sealing is consistently ranked as the #1 air sealing location. Great Stuff Pro Gasket forms a seal between framing lumber and drywall, which can result in up to 1.6 ACH50 reductions. Gasket Foam has a high yield of approximately 250 linear feet or more at ½” wide bead and helps reduce moisture and pollutants..
  • FLEXIBLE SEALANT! Great Stuff Pro Gasket is a flexible, water based, one component foam designed to form an interior gasket between framing lumber and drywall, which improves air sealing performance. Material is applied and allowed to dry to the face of the top plate, bottom plate and around the perimeter of all rough openings before installing drywall. The unique gasket performance allows product use without any changes to construction sequencing..
  • EASY TO USE! Shake the can vigorously for 60 seconds before use. Apply to face of top plate, bottom plate and around rough openings. Gasket Foam air cures in 2 to 24 hours and withstands scrapping and rubbing when drywall is installed. If the can is not finished after the job is done, leave it on the can and close the valve until the next use. Gasket Foam is reusable fo....
Check Stock

Saipe 2pcs Adjustable Screw Depth Screwdriver Bit Holder Magnetic Steel Screwdriver Drywall Bit 1/4 Inch Hex Shank with S2 Phillips 2 Screw Driver Bits

  • Made of Chrome vanadium steel, high hardness and anti-rust, giving you long lasting and maximum durability..
  • The adjustable depth screwdriver bit holder can set screws in straight and to a predetermined depth, allowing for accurate working with drywall screws..
  • Strong magnetic tip can hold the bits and convenient pick-up and retention of screws, work for 1/4x1” Phillips Bits.
  • Versatile Use: Use for deck building, wood framing, installing plywood subfloor, building crates, etc..
  • 1/4" hex shank can be easily fit into power driver, drill and handheld screwdriver. Packaged included: 2pcs Screw Driver Bit Holder with 2pcs PH2 Drywall Insert Bit.
Check Stock

Camber Consumer Care Esomeprazole Magnesium 20mg Delayed-Release Capsules 24 Hour Acid Reducer 42 Count

  • Strong, Versatile Adhesive: PL Premium MAX is strongest, most durable construction adhesive that remains 100% solid after curing for a wide variety of....
  • Solid Durability: Doesn’t develop air pockets for better flexibility and a heavy-duty bond that professionals can trust.
  • Unrivaled Bonding: Works reliably on wood, laminate, drywall, concrete, brick, masonry, stone, marble, metal, stainless steel, fiberglass, and more.
  • Interior and Exterior: Great for framing, flooring, stairs, railings, and most landscaping and deck projects with no strong solvent odor and a....
  • All Weather: Waterproof and can be applied directly to wet and frozen surfaces in both cold (down to 10° F) and hot (120° F) temperatures.
Check Stock

Makita XT255T 18V LXT Lithium-Ion Cordless 2-Pc. Combo Kit (5.0Ah)

  • Drywall screwdriver with BL motor delivers 0-4, 000 RPM to handle a variety of drywall and framing applications.
  • Push drive technology – in lock-on mode the motor starts only when the fastener is engaged for a quieter work environment and to save battery power.
  • Extreme protection technology (XPT) is engineered to provide increased dust and water resistance in harsh job site conditions.
  • The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life.
  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
Check Stock

Drywall Nails Smooth Head 1-5/8-In 1-Lb Box

  • 1.62 in. Cupped head phosphate coated drywall nail.
  • Great for use in construction, carpentry and framing.
Check Stock

HammerMaster | Hammer Holder Loop - Clip-On Tool Belt Holster Holds Hammers, Hatchet, or Mallet

  • WORK LIGHT AND FAST | Carry your hammer, hatchet, or mallet in this lightweight, minimalist loop that clips easily on and off of your belt, pockets, or tool bags..
  • EASY TO CLIP-ON/OFF | Fits belts and straps up to 1.75" (45mm). Doesn't need to thread onto your belt. Take it off quickly when you're done working or getting into a vehicle..
  • WORKS WITH A WIDE RANGE OF HAMMERS | Firmly holds a framing hammer, sledgehammer, hatchet, ax, rubber mallet, ball peen hammer, dead blow hammer, claw hammer, tack hammer, drywall hammer, welding hammer, rock hammer, brick hammer, electrician hammer, and more!.
  • LOW-PROFILE PROFESSIONAL LOOK | Holds snug to your belt and doesn't get grimy like nylon or leather hammer loops..
  • ASSEMBLED IN IDAHO, USA | Durable holster Kydex frame, 100% polycarbonate belt clip, steel loop, and rivets..
Check Stock

Linhdor GB 4000 Drywall Bead Tape-in Mud-in Non Exposed Flange Metal Access Door for Walls and Ceilings USA Made (24x24, Cam Latch Lock)

  • Construction – Access door for drywall is manufactured in the USA with an 16 Gauge steel frame and 14 Gauge steel door. Interior metal access door can be installed in the ceiling or wall. These metal access door will pass any government inspection requiring a USA. made product to be installed..
  • Design – 1″ Wide Perforated, 24 Gauge Galvanized Drywall Bead Mud in Flange . Metal access has a quality flush panel door with a tape-in drywall bead flange, eliminates visual distraction created by projecting, surface-mounted units. Non Exposed mud in drywall. Flange to keep flush with drywall or ceiling to maintain beautiful aesthetics for any building.".
  • Durability – Access door for drywall has rust resistant galvannealed steel to keep your interior access door from rusting and deterioration. Drywall door panel has large accurate cam slots to keep cams sturdy in place and to prevent metal access doors from sagging. Steel Cam Latch quantities dependent on door size..
  • Functionality -- Access door for drywall is equipped with strong 14 gauge 304 stainless steel cam latches with large screwdriver slot for easy opening. Hi....
Check Stock

DEWALT Drywall Screw Gun, 6.0-Amp (DW255)

  • Drywall screw gun has a depth-sensitive, "set and forget" nosepiece for consistent fastener depth.
  • DEWALT drywall screw gun has two-finger trigger for increased comfort and ease of use.
  • The drywall gun has 5,300 RPM high speed motor for production drywall hanging.
  • Helical-cut steel and heat-treated gears for long life and durability.
  • Depth-sensitive, set and forget-inch nose-piece for consistent fastener depth.
  • Two-finger, rubber trigger for increased comfort.
  • Hi-speed transmission for production drywall hanging.
  • Helical-cut steel, heat-treated steel gears for long life and durability.
Check Stock

Freeman SSFR.120-3RS 21 Degree .120\ x 3\ Plastic Collated Stainless Steel Ring Shank Full Round Head Framing Nails (2500 count)

  • Ideal for applications such as framing, subfloors, roof decking, pallet and shipping crate assembly, decks and docks.
  • Compatible with most framing nailers capable of firing 21 degree 3" plastic collated framing nails, as Freeman's PFR2190, PFR2190NQ, G22183CLW, and G2FR2190.
  • Solid stainless steel for strength and durability.
  • 304 stainless steel framing nails won't corrode and stain natural finish wood or pressure treated lumber.
Check Stock

Drywall Lift Panel 11' Lift Drywall Panel Hoist,Jack Lifter Jack Rolling Caster Wheel Drywall Lift Construction Tools

  • 【Easy to assemble and disassemble】The drywall lift is very solidly built , The Drywall Panel Hoist is easy to assemble and disassemble without tools. The Panel Hoist folds up nicely with good weight to strength ratio.drywall lift Panel Lift Panel Hoist Jack Lifter Jack Rolling Caster.
  • 【Allows one person working alone】This drywall lift is perfect for DIY and residential use. The Drywall Panel Hoist allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them. Panel Lift Panel Hoist Jack Lifter Jack Rolling Caster drywall lift.
  • 【Safe and in good balance】The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Drywall Panel Hoist does the actual lifting through a cable/ pulley mechanism. Turning the wheel reels in a 3/16th inch metal aircraft cableof the Panel Hoist.Panel Hoist Jack Lifter Jack Rolling Caster drywall lift Panel Lift Panel.
  • 【150Lbs Load Capacity】This drywall lifter is made of heavy duty steel.The Drywall Panel Hoist ensures its long life span. The Panel Hoist is load capacity is about 150 lbs.Lifter Jack Rolling Caster drywall lift Panel Lift Panel Hoi....
Check Stock

21 Pocket Carpenter Tool Belt, Tan - Adjustable - Padded Leather Tool Belt for Carpenters/Electricians/Framers

  • ...st and customise it to suit a left hand or right hand setup, pouch handles on top allows you to carry and hang up your tool belt easily.
  • ✔️ MULTIPLE TRADES - this professional tool belt is perfect for multiple trades, tool bags for carpenter, electrician tool belt, framers tool belt, and also ideal for any task, drywall, roofing, framing, flooring or even the general handyman doing some DIY. This work belt fits waist sizes 30inch to 45inch.
  • ✔️ COMFORT - an extra wide diamond stitched padded support belt helps you support your back from the work load. Fits 30 inch waist to 45 inch waist.
Check Stock