Categories

Best Dual Port Valve

Garberiel Valve Core Remover Installer Tool with Dual Size SAE 1/4 & 5/16 Port for R22 R12 R407 R410 R404 R32 R600 A/C Include 5 Valve Cores with Teflon Seal

  • 【Great Function】The valve core remover installer tool’s core grabber tool makes it be easily inserted into the inner valve core to control the....
  • 【Extensive Usage】Suitable for all refrigeration equipment, dual size( SAE 1/4'' & 5/16'' Port ) design makes the valve core remover installer tool....
  • 【Premium Quality Valve Sets】The valve core remover installer tool is made of high quality thicker brass and rubber, the metal knob is all designed....
  • 【Main Features】Anti-slip design, increase hand friction, prevent all kinds of overpowered valves.
  • High-quality craftsmanship probes, rugged and....
  • 【Good Deisgn】Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a slower to operate....
Check Stock

WADEO Valve Core Remover Installer Tool with Dual Size SAE 1/4 & 5/16 Port 4 Valve Cores with Teflon Seal Compatible with R22 R12 R407 R410 R404 R32 R600 A/C

  • Great Function: The valve core remover installer tool’s core grabber tool makes it be easily inserted into the inner valve core to control the core.....
  • Premium Quality Valve Sets: The valve core remover installer tool is made of high quality thicker brass and rubber, the metal knob is all designed....
  • Extensive Usage: Suitable for all refrigeration equipment, dual size( SAE 1/4'' & 5/16'' Port ) design makes the valve core remover installer tool be....
  • Main Features: Anti-slip design, increase hand friction, prevent all kinds of overpowered valves.
  • High-quality craftsmanship probes, rugged and....
  • Good Deisgn: Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a slower to operate....
Check Stock

Chief G Series Hydraulic Directional Control Valve with Joystick, Hydraulic Flow Control Valve with 2 Spool 3-pos Spring Center - 10 GPM, 3625 PSI, SAE 8 Work, SAE 10 Inlet/Outlet Ports, 10 lb, 220910

  • Hydraulic Spool Valve: Equipped with 1 spool and 1/2" BSPP P port, A port, B port. 3/4" BSPP T port, N port. The maximum pressure of this hydraulic is 3625 PSI, and the maximum flow can reach 21 GPM. The opening and disconnection of hydraulic oil are controlled by connecting the valve to the oil line..
  • Automatically Reset: The standard spool is spring-returned and can be reset to the neutral position. In addition, there is a spring at the bottom of the handle that makes the joystick easy to control..
  • Great Inner Valve: The check valve in the valve body ensures that the hydraulic oil does not return, and the overflow valve in the valve body can adjust the working pressure of the hydraulic system..
  • Compact Structure: 1 spool hydraulic valve is made of aluminum and iron, and the solid structure can provide long-term service. The compact design allows it to install in narrow areas and maximizes its control capabilities..
  • Widely Used: It is used in hydraulic systems in agriculture, horticulture, forestry, construction, and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, construction machines, loaders, excavators, sweepers, industrial machines, and for other applications hydraulically controlled..
Check Stock

WADEO Valve Core Remover Tool HVAC with Dual Size SAE 1/4 & 5/16 Port, 20 PCS Valve Cores with Teflon Seal, 5 PCS Brass Nuts and Valve Core Rod, Compatible with R410A R32 R22 R12 R407 R404 R600

  • Wide Application: Suitable for home refrigeration equipments, dual size sae 1/4'' & 5/16'' port makes the valve core remover tool be compatible with R410, R22, R12, R407, R404, R32 A/C air condition system, etc. (Not suitable for Automotive AC).
  • Easy to Install: Use this hvac valve core remover tool, the valve core rod makes it be easily inserted into the inner valve core to control the valve core. you don't need to stop the machine and release the refrigerant. Note: Before removing the valve core, close the valve of the valve core wrench and disconnect the air conditioner inner connection..
  • Upgraded Valve Cores: The bottom of our valve cores are golden yellow, strong resistance to fluorine and heat, has longer service life than ordinary valve cores.
  • Great Design: This hvac tools are mainly made of brass, it has a ball valve that can be opened and closed in just a quarter-turn. (No Gas Loss). Anti-slip design increase hand friction, prevent all kinds of overpowered valves.
  • High-quality craftsmanship probes, rugged and durable, suitable for most equipments. ality craftsmanship probes, rugged and ....
Check Stock

WADEO Valve Core Remover Installer Tool with Dual Size SAE 1/4 & 5/16 Port, 20 PCS Valve Cores with Teflon Seal and 10 PCS Brass Nuts, Compatible with R22 R12 R407 R410 R404 R32 R600 A/C

  • Upgrade Environmentally Friendly Valve Cores: The bottom of our valve cores are golden yellow, longer service life than ordinary valve cores, strong resistance to fluorine, stronger heat..
  • Easy to Install: The valve core remover installer tool’s core grabber tool makes it be easily inserted into the inner valve core to control the core. No need to stop the machine, no need to release the refrigerant..
  • Wide Application: Suitable for all refrigeration equipment, dual size( SAE 1/4'' & 5/16'' Port ) design makes the valve core remover installer tool be compatible with R22, R12, R407, R410, R404, R32 A/C air condition system, etc..
  • Great Design: Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn. (No Gas Loss). Anti-slip design increase hand friction, prevent all kinds of overpowered valves.
  • High-quality craftsmanship probes, rugged and durable, suitable for most equipments..
  • Package Included: 1* Valve Core Remover, 1 *R410 R32 Brass Adapter, 20* Valve Cores, 10* brass nuts..
Check Stock

2Pcs Straight Aluminum Bare Cylinder Head Compatible with Chevy Small Block 302/327/350/383/400 SBC 200cc Intake 68cc

  • ▶️ High grade aluminum, bronze valve guides, hardened seats, advance port design for greater air flow.
  • ▶️ This head is 200cc intake runner with a 68cc combustion chamber, 68cc combustion chambers improve performance and retains stock compression on 1970 and earlier.
  • ▶️ Lighter than Iron Heads. Each Head weighs 10.33kg.
Check Stock

Swimables Valve Insert Replacement for All Jandy 2 Way and 3 Way Valves - Neverlube Diverter Valve Kit 4720 Replacement for Zodiac 2 Port or 3 Port

  • Perfect Fit: Fits all Jandy NeverLube 2 and 3 Port Valves and Jandy Gray 2 and 3 Port Valves. Perfectly fits Zodiac Never Lube Valves.
  • Installation: Make sure that the pump is turned off. Remove the 8 screws on top of the new valve and lift out the Diverter Valve Assembly..
  • Installation: Replace the Diverter Valve Assembly into the Valve and tighten it down with the 8 screws. Make sure the Valve Assembly is inserted the same way as it was with the "INLET" label positioned on the middle port where the water comes in. If you insert the Valve any other way, you run the risk of shutting off all water to this valve..
  • Kit Includes: This kit includes (1) diverter valve assembly, (2) Shaft Orings, (1) Cap Oring and (1) Valve Knob. Excellent Aftermarket Replacement.
  • 100% Satisfaction Guarenteed: Buy with confidence, as our premium quality diverter valve insert is built to last, and if you're not satisfied with it at any time within 30 days of purchase, we'll provide a refund or replacement..
Check Stock

Beduan 2 Way Normally Closed DC 12V Electric Solenoid Air Valve 1/8\ NPT

  • 【Service Media/Material】 Air, Gas, Liquid, Water./ Anodized Aluminum.
  • 【Port Coil Voltage】 12V Port size: 1/8" Female inlet/outlet port..
  • 【Temperature/ Pressure Range】 23-176°F, Pressure Range:115 PSI..
  • 【Selenoid Valve Type】 2 Way Normally Closed (Valve opens with energized). Normally closed type with long life span and excellent sealing..
  • 【Feature】This solenoid water valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum). Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized..
Check Stock

Air compressor pilot unloader valve with muffler Vent Rolair 131B 125-150 psi

  • ✅【Product Description】This is a pressure switch, control valve with a single port connection manifold. Air compressor pressure switch is similar to the regular single port pressure switch, but this switch is equipped with heavy duty 26A contacts to provide a longer lasting switch in demanding applications..
  • ✅【Pressure Switch Features】Air compressor switch is a universal pressure switch replacement, convenient to replace the broken one..
  • ✅【Excellent Material】100% Brand new and high quality. Pressure switch control valve is Made of high quality material, with long mechanical life..
  • ✅【Specifications】Type: pressure sw....
Check Stock

Solimeta 2 Economical Gas Test Pressure Gauge,0-30 PSI

  • Residential & commercial pressure testing of natural gas, air and water lines..
  • Economical pressure gauge and valve body assembly used for pressure testing..
  • Bleed port and plated housing on the gas test assembly..
Check Stock

2 x NEW Improved 6.0 6.0L Ford Powerstroke Diesel LOADED O-RING 18mm Cylinder Head PAIR 2003-07 No Core (18MM O-ring)

  • High grade aluminum, bronze valve guides, hardened seats, advance port design for greater air flow.
  • This head is 200cc intake runner with a 68cc combustion chamber, 68cc combustion chambers improve performance and retains stock compression on 1970 and earlier.
  • Lighter than Iron Heads. Each Head weighs 10.33kg.
Check Stock

R410A R22 Valve Core Remover & Installer with Dual Size SAE 1/4 & 5/16 Port Air Conditioning Line Repair Tools for R404A R407C R134A R32 HVAC System

  • CONNECTION ----- The dual size 1/4" & 5/16" SAE valve core remover and install tool can adapt to R22/R134/R410/R32R air-condition, external bypass port design can remover valve cores. Works great for both Minisplit systems as well as 1/4" service valves on split systems..
  • EASY INSTALLATION ----- The Schrader's core grabber with disconnect valve, the tool can be easily inserted into the inner valve core for removal or installation. Built-in disconnect valve for easy operation, no need to stop the machine, no need to release the refrigerant..
  • PERFECT DESIGN ----- The valve core remover installer tool is made of pure copper.
  • The metal knob is all designed with anti-slip design. Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a slower to operate stem-type valve. (No Gas Loss)..
  • GREAT FUNCTION ----- Shut-off Ball value handle, metal schrader cap, schrader's core grabber tool, built-in magnet at the bottom base. Please close the valve and disconnect the air conditioner before removing the valve core..
  • 2-YEAR WARRANTY ----- Order from SURIEEN, we offer 2-YEAR WARRANTY, true worry-free shopping experience. If you are not satisfied with the item please contact us ask for a replacement or refund in limit....
Check Stock

Lichamp A/C R134A Adapters with Puncture 134A Can Tap, AC 134 Quick Coupler Hose Connector Fitting Kit with Tank Adapter and Valve Core Remover, QA02

  • Professional AC R134A freon charging tool kit, come with pair of R-134A adapter, 1-piece ac can tap valve with tank adapter, 1 classic valve core remover..
  • R 134A Adapter, adjustable valve for easy attching and removal without freon leaking, accurate snap lock (5 ball) with knurled grip ring for easy operation, removable copper adapter for longer maintenance, 1/4 inch male fitting compatible with most automotive air conditioner diagnostic AC manifold gauge hose.
  • Can Tap Valve Set, R-134A can tap refrigerant bottle dispenser with 1/4 inch male fitting, extra conversion tank adapter featuring 1/4 inch female to 1/2 inch male fitting, thus this set will fits both 1/4 and 1/2 inch female fittings AC gauge hose.
  • Come with extra automotive high and low pressure side service port valve core removal and installation tool, dual head with thick and thin heads will fits most models.
  • 100% SATISFACTION: If you aren't satisfied with your purchase, contact us through our email at any time you want, and we'll issue you a refund..
Check Stock