Automotive Digital Timer Relay Board DC 12V 20A 1500W Relay Module with Dual Time Display, Timing Relay Switch ON-Off Control Support Cycle of time Time Delay for Car Vehicle (DC 12V)
- ❃❃ Digital cycle timer delay module with time ranging from 1 second to 999 hours, available for various application.▲▲ (Notice: no out put Voltage) If you need the E-Manual or meet any other questions, pls contact us and we will send it to you!!!.
- ❃❃ The time relay delay Dual display: Red readout for practical value(PV).
- ❃❃ Can be used in timing, delaying, cycle timing, intermittent timing, raft fishing machine, slow-down machine DIY, etc..
- ❃❃ This relay switch is four-terminal wiring and setting by buttons, easy and simple for everyone to use it..
- ❃❃ This 12V time delay relay can store the setting automatically. Please wait 6 seconds after finishing setting the data. The data set will be stored automatically after 6 seconds..
Check StockXentec H11 relay wiring harness for HID kit
- 8-Light 8000w High Power HID Master 120v~240v Grow Light Relay Controller w/120 volt Trigger Cable for Hydroponics (8-Light).
- The trigger cable can be plugged into a standard 24-hour timer or environmental controller.
- Maximum Lighting Wattage: 8000watt (1000 watt per outlet).
- Minimum relay operations: 100,000 at full load..
Check StockWOWOONE 30 Types 74HCxx Series Logic IC Assortment Kit, Logic Gates, Integrated Circuits Assortment Kit, TTL, High-Speed Si-Gate CMOS IC, Low-Power
- Input point X element x0-x7, DC24 input, low level valid. X0-5 is the high-speed counting input port (default: 12K,100KHZ optional)..
- Output analog voltage WR3A instruction, corresponding to the value 0-4095. Intermediate relay M: M0-M3071, the power loss preservation range can be set..
- The maximum speed current is 1A. External load common terminating + 24, the other end received the PLC output port Y..
- Y0-Y5 is optional relay or transistor output, relay output current 5A. The transistor output DC24V, the current maximum 1A..
- 100Ms timer: t0-t199, accumulative power off save t184-t199.
- 10Ms timer: T200-T249, accumulative power off saving T246-T249.
- 1Ms timer: T250-T383, where T250-255 is cumulative.
- 16-bit counter: C0-C199, power off to save C100-199.
- 32-bit counter: C200-C219, power off to save C220-C234.
Check StockTuimiyisou Relay Module Board Switch Motor Time Adjustable Delay Relay DC 5V 6V 9V 12V Intelligent Controller Time Adjustable Delay Relay
- This Relay Delay Switch is easy to use when you are familar with the operation.
- Relay Board has high precision, stable and reliable performance for your daily use and satisfaction.
- There are many voltage and time range of the Relay Module for your choice, both "on" time and "off" time are adjustable.
- Time Adjustable Delay Relay can be widely used on timer operating equipment, machine repetitive test circuit, fish tank intermittent pump, etc.
- With the Relay Module Controller, your life will be more intelligent and convenient.
Check StockTuimiyisou Relay Module Board Switch Motor Time Adjustable Delay Relay DC 5V 6V 9V 12V Intelligent Controller Industrial Control Components-Module
- This Relay Delay Switch is easy to use when you are familar with the operation.
- With the Relay Module Controller, your life will be more intelligent and convenient.
- Relay Board has high precision, stable and reliable performance for your daily use and satisfaction.
- There are many voltage and time range of the Relay Module for your choice, both "on" time and "off" time are adjustable.
- Time Adjustable Delay Relay can be widely used on timer operating equipment, machine repetitive test circuit, fish tank intermittent pump, etc.
Check Stock
Dakota Digital PAC-2800BT Electronic Fan Controller 70 Amp with Bluetooth Control
- The PAC-2800BT was designed for the ultimate in flexibility and to be a simple add-on in any application using an electric fan. Included is a 70amp relay, enough for even the most power hungry of cooling fans. Fully programmable, the PAC-2800BT will work with your existing water temp gauge, operating from the temperature sending unit already installed. A dedicated sending unit can be installed for applications without a water temp gauge..
- ompatible with single fan, dual fan or single two-speed fan applications.User-settable on and off temperatures.** 70A relay included, additional relay is available for purchase separately.
- RLY-1 (0-30 amp) or RLY-3 (0-70 amp). The use of a second relay RLY-1 (0-30 amp) or RLY-3 (0-70 amp) will be required for dual fan or two speed fan operation (not included, sold separately)..
- User-settable on and off temperatures. The PAC-2800BT features fully programmable "fan on" and "fan off" temperatures to suit any application or personal preferences. The PAC-2800BT offers a full digital LED readout for displaying temperature readings and maintaining simple installation. A second relay is required for dual fan or two speed fan operation, sold separately..
Check Stock
Shuian 10 Pcs 3V Relay Power Switch Board, Songhe DC 1 Channel Optocoupler Relay, High Level Trigger for IOT ESP8266 Development Board.
- The 3v Relay 1 Channel power switch module compatible with 10A 250VAC and 10A 30VDC load.4pcs * 2.5 mm Fixed Bolt Hole..
- 3V/3.3V power relay module supports photocoupler isolation control and dual power supply input ensure high anti-interference ability. Fast response time less than 20ms and long life time up to 100,000 times snap action with diode freewheel protection..
- Equiped with high-current relay, AC250V 10A.
- DC30V 10A,each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
- Support dual power supply input ensure high anti-interference ability,high reliability of photoelectric isolation protection,The external connection uses the rotary crimping terminal, causes the wiring to be more solid..
- You are free to select whether the relay and the signal share the same power supply or not by removing the jumper caps on the pins or not. It is recommended to share the same power supply, because that is more convenient for using..
Check Stock
MakerHawk Time Delay Relay, 12V 5V USB Relay Module 6-30V Delay Controller Board Delay-Off Cycle Timer Control Switch with LCD Display Support Micro USB 5V Power Supply
- Timer delay relay module operating voltage range is DC 6-30V, support micro USB 5.0 V power supply.
- support high level trigger 3.0V-34V and low level trigger 0V-0.2V.
- timing range is 0.01s9999mins, can be continuously adjustable. Powerful and easy to use. Indication link: please get it from the product description..
- LCD Display: The relay board is desiged with LCD display, can clearly and directly show the current mode and parameters..
- Sleep Mode: Without any operation within 5 minutes, the LCD backlight of the 12v timer relay will close automatically. Any button can wake up..
- Independent Parameters: OP/CL/LOP parameters can be modified and saved, and they are individual. Auto Save: All setting parameters are automatically saved by power-fail..
- Automatically hibernation function/ Low power function: In the running interface, long press STOP to open or close automatically sleep function. (L-P selects ON to start the hibernation function, and OFF turns off the hibernation function).
Check Stock
12 Volt Timer Relay, DROK 0.1s to 999min 50mA 4-Mode On-Off Automotive Digital Delay Relay, Electric Delay Timer Switch, Cycle Time Delay Module with LED Display
- 4 MODE TIME DELAY RELAY: DROK 12V relay is provided with 4 different settings and supports various triggering signal source, like positive side of power supply triggering, Button, PNP sensor, PLC signal, which is available for most of applications..
- WIDE ADJUSTABLE TIMING RANGE: This off delay relay supports widest timing range, 0.1 seconds to 999 minutes adjustable, which can fulfilled your various need..
- STRONG ANTI-INTERFERENCE ABILITY: The output of digital timer relay adopts optocoupler isolation, which enhances the capacity of resisting disturbance power consumption..
- SUPER SIMPLE OPERATION: Our relay board is operated by buttons and the delay module is equipped with LED digital display which is convenient for you to check the set value..
- AUTOMATIC SAVING FUNCTION: After you finish the setting, you can cut off the power and then the parameters will be saved automatically, handy and convenient..
Check Stock
3v Relay Board Raspberry Pi Arduino Relay Module 1 Channel Opto-Isolate High Level Trigger for IOT ESP8266 Microcontrollers Development Board
- 【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
- 【Main Specification】- The 3v Relay 1 Channel power switch module compatible with 10A 250VAC and 10A 30VDC load.4pcs * 2.5 mm Fixed Bolt Hole..
- 【Adopted Optocoupler Isolation】- 3V/3.3V power relay module supports photocoupler isolation control and dual power supply input ensure high anti-interference ability. Fast response time less than 20ms and long life time up to 100,000 times snap action with diode freewheel protection..
- 【Jumper Caps】You can select whether the relay and the signal use the same power supply or not by removing the jumper caps on the pins. And It is better to share the same power supply, because that is more convenient for using..
- 【Wide Application】- These 3v relay board works well with Arduino/ ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/IOT/ ESP8266 module etc..
Check StockHubbell TD1000 Digital Display Module
- Support AC and DC control signal, Relay action LED indicator, relay coil protection by means of a freewheeling diode..
- Panasonic PA1a SPST-NO 5Amp power relay. Original Panasonic PA1a-PS pluggable socket for support replacement relay, and with removal key..
- Dinkle high quality fireproof nylon material DIN rail mount housing, can support width 35mm, 32mm and 15mm rail..
- High quality screw terminal blocks and clear marking label for terminal block position. Pitch 5.08mm/0.2" and 7.62mm/0.3" screw terminal block. Wire range 26 to 12AWG / 2.5mm square. Screws - M2.5, steel, Cr3+ Zn plated. Pin header and Cage - Brass..
- High quality glass fiber FR-4 PCB, top and bottom dual copper layers..
Check Stock
eMylo WiFi Relay Switch Wireless Light Remote Control Module For Smart Home Automation Compatible with Alexa DIY 6 Packs
- 【APP Remote Control】 Wifi smart relay switch can work with Smart Life and Tuya Smart APP, you can turn on or turn off switch via smart phone anytime and anywhere, you can turn off home lights on the way to the firm, it only supports 2.4Ghz Wifi, no gateway required..
- 【Timer and Schedule】 Wifi relay switch have timing function, you can preset a specific time to turn on or turn off home light by Smart Life or Tuya Smart APP, which can help you to decrease electricity consumption, so save your money..
- 【Voice Control】 Smart light switch can compatible with Alexa and Google Assistant, when you’re busying cooking or doing housework, you just send out a voice command to turn on or turn off lights, which can release your hands..
- 【Simple to Install】 Smart relay switch is simple to install, only need to connect the live wire and neutral wire at both ends of the smart switch, Connecting 1 end to the power supply and the other end to the light..
- 【Families Share】 Wifi smart relay switch support families share, you can share this device to your families, so your famili....
Check StockWiring Harness,Eyourlife LED Light Bar Wiring Harness Kit 180W 12V 40A Fuse Relay On/Off Switch Relay 14AWG 12FT Length Heavy Duty Universal Fitment(2 Lead)
- Eyourlife Switch Relay: Eyourlife IP56 waterproof power relay and blade fuse proctect circuit safety from overcurrent or short-circuit.Regulate the power to be consistent and prevent any surge..
- 2 Available Leads:One wiring harmess with two light output connectors gives you brilliant solution to install dual Led lights..
- Detail:Operating Voltage: 12V,Amp: 40A ,Power Relay Fuse: 40A ,Blade Fuse: ≤180W.
Check Stock
